Hi misc@ R600: switch from X to vt, OK. zzz from vt, screen goes blank, backlight is still on and no change in status leds. At this point the machine is not responsive, power button doesn't work, keypresses don't do anything, no response to ping requests.
R700: same behaviour, in addition text terminals show no text after X is started, also the R700 in general is a little flakey (hangs - 4 second power button depress required). On the initial install I found this machine more reliable when switching to legacy hard drive mode (so disk shows up as wd0 instead of sd0). Sometime during 4.8-current suspend/resume worked flawlessly on the R600 (this was prior to purchasing the R700), I was running current but there was a gap of a month or two between upgrades, I think suspend on 4.8-release didn't work (not 100% sure on that) and I don't know the date of the snapshot I was successfully running unfortunately. I have been reading source-changes for about a year and I have browsed through the acpi source code but I have no clue on how to diagnose this...any ideas? Thanks. acpidump: http://121.212.255.234/R600.tgz http://121.212.255.234/R700.tgz R600 dmesg: OpenBSD 4.9-current (GENERIC.MP) #814: Wed Mar 23 13:00:06 MDT 2011 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM)2 Duo CPU U9400 @ 1.40GHz ("GenuineIntel" 686-class) 1.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE real mem = 3010621440 (2871MB) avail mem = 2951208960 (2814MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 09/04/09, BIOS32 rev. 0 @ 0xfca9d, SMBIOS rev. 2.5 @ 0xec000 (46 entries) bios0: vendor TOSHIBA version "Version 3.00" date 09/04/2009 bios0: TOSHIBA PORTEGE R600 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC MCFG HPET TCPA SLIC DMAR SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices USB1(S4) USB4(S4) USB5(S4) USB6(S4) EHC1(S4) EHC2(S4) AZAL(S3) WLAN(S4) EXCB(S4) LAN_(S4) LID_(S4) PWRB(S4) HS87(S4) HS86(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU U9400 @ 1.40GHz ("GenuineIntel" 686-class) 1.40 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (PCIB) acpiprt2 at acpi0: bus 1 (MPEX) acpiprt3 at acpi0: bus 2 (EXCB) acpicpu0 at acpi0: C1, PSS acpicpu1 at acpi0: C1, PSS acpipwrres0 at acpi0: PDOC acpitz0 at acpi0: critical temperature 107 degC acpibtn0 at acpi0: LID_ acpibat0 at acpi0: BAT1 model "G71C00086110" serial 0000000628 type Li-ION oem "0" acpibtn1 at acpi0: PWRB acpiac0 at acpi0: AC unit online acpidock0 at acpi0: DOCK not docked (0) acpivideo0 at acpi0: VGA_ acpivout0 at acpivideo0: LCD_ acpivout1 at acpivideo0: CRT_ acpivout2 at acpivideo0: DVI_ bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x3000 0xe8000/0x8000! cpu0: Enhanced SpeedStep 1397 MHz: speeds: 1401, 1400, 1200, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 inteldrm0 at vga1: apic 1 int 16 (irq 10) drm0 at inteldrm0 "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int 20 (irq 11), address 00:23:18:d8:49:55 uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq 10) uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 (irq 11) uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq 11) ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int 22 (irq 11) azalia0: codecs: Realtek ALC262 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03 pci1 at ppb0 bus 1 iwn0 at pci1 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 1 int 16 (irq 10), MIMO 1T2R, MoW, address 00:26:c6:1d:63:b4 ppb1 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 19 (irq 11) pci2 at ppb1 bus 2 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 23 (irq 11) uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq 11) uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 11) ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 (irq 11) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci3 at ppb2 bus 4 sdhc0 at pci3 dev 11 function 0 "Ricoh 5C822 SD/MMC" rev 0x22: apic 1 int 21 (irq 11) sdmmc0 at sdhc0 pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 1 int 19 (irq 11) for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <Hitachi HTS723220L9A360> wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x03: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 1 int 21 (irq 11) for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support umodem0 at uhub0 port 4 configuration 1 interface 1 "Ericsson Toshiba F3507g Mobile Broadband Device" rev 2.00/0.00 addr 2 umodem0: data interface 2, has CM over data, has break umodem0: status change notification available ucom0 at umodem0 umodem1 at uhub0 port 4 configuration 1 interface 3 "Ericsson Toshiba F3507g Mobile Broadband Device" rev 2.00/0.00 addr 2 umodem1: data interface 4, has CM over data, has break umodem1: status change notification available ucom1 at umodem1 umodem2 at uhub0 port 4 configuration 1 interface 9 "Ericsson Toshiba F3507g Mobile Broadband Device" rev 2.00/0.00 addr 2 umodem2: data interface 12, has CM over data, has break umodem2: no data interface ugen0 at uhub0 port 4 configuration 1 "Ericsson Toshiba F3507g Mobile Broadband Device" rev 2.00/0.00 addr 2 uvideo0 at uhub1 port 2 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/75.14 addr 2 video0 at uvideo0 umass0 at uhub1 port 3 configuration 1 interface 0 "TOSHIBA Optical Drive Controller" rev 2.00/0.00 addr 3 umass0: using ATAPI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 cd0 at scsibus0 targ 1 lun 0: <MATSHITA, DVD-RAM UJ-844S, 1.20> ATAPI 5/cdrom removable ugen1 at uhub6 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/c.10 addr 2 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b R700 dmesg: OpenBSD 4.9-current (GENERIC.MP) #814: Wed Mar 23 13:00:06 MDT 2011 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz ("GenuineIntel" 686-class) 2.27 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT real mem = 3070648320 (2928MB) avail mem = 3010256896 (2870MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/17/10, BIOS32 rev. 0 @ 0xfc8e6, SMBIOS rev. 2.4 @ 0xb77f4000 (60 entries) bios0: vendor TOSHIBA version "Version 1.40" date 07/20/2010 bios0: TOSHIBA PORTEGE R700 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG TCPA BOOT SLIC SSDT SSDT SSDT ASF! SSDT acpi0: wakeup devices PEG4(S4) IIOB(S4) LANC(S4) HDEF(S3) RP03(S4) PXSX(S4) USBC(S4) RP05(S4) PXSX(S4) EHC1(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) EHC2(S4) USB5(S4) USB6(S4) USB7(S4) PWRB(S4) LID_(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz ("GenuineIntel" 686-class) 2.27 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz ("GenuineIntel" 686-class) 2.27 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT cpu3 at mainbus0: apid 5 (application processor) cpu3: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz ("GenuineIntel" 686-class) 2.27 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG4): _PRT is not a package acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus 3 (RP03) acpiprt5 at acpi0: bus 5 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus 6 (PCIB) acpicpu0 at acpi0: C3, C1, PSS acpicpu1 at acpi0: C3, C1, PSS acpicpu2 at acpi0: C3, C1, PSS acpicpu3 at acpi0: C3, C1, PSS acpipwrres0 at acpi0: PDOC acpitz0 at acpi0: critical temperature 107 degC acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID_ acpibat0 at acpi0: BAT1 model "G71C000BE310" serial 0000000120 type Li-ION oem "0" acpidock0 at acpi0: DOCK not docked (0) acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD01 acpivout1 at acpivideo0: DD02 acpivout2 at acpivideo0: DD03 acpivout3 at acpivideo0: DD05 bios0: ROM list: 0xc0000/0xf400! 0xcf800/0x1000 0xe0000/0x10000! cpu0: Enhanced SpeedStep 2262 MHz: speeds: 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199, 1066, 933 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel Mobile HD graphics" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0 at vga1: apic 1 int 16 (irq 11) drm0 at inteldrm0 "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 "Intel 82577LC" rev 0x06: apic 1 int 20 (irq 6), address 00:23:18:84:77:86 ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 16 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: apic 1 int 22 (irq 5) azalia0: codecs: Realtek ALC269, Intel/0x2804, using Realtek ALC269 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 1 int 16 (irq 11) pci1 at ppb0 bus 1 sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x01: apic 1 int 16 (irq 11) sdmmc0 at sdhc0 ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x06: apic 1 int 17 (irq 3) pci2 at ppb1 bus 2 "Broadcom BCM4313" rev 0x01 at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 28 function 2 "Intel 3400 PCIE" rev 0x06: apic 1 int 18 (irq 10) pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: apic 1 int 19 (irq 11) pci4 at ppb3 bus 5 ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23 (irq 11) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6 pci5 at ppb4 bus 6 cbb0 at pci5 dev 0 function 0 "O2 Micro OZ69[17]2 CardBus" rev 0x40: apic 1 int 21 (irq 11) cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 7 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x06 pciide0 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x06: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 1 int 19 (irq 11) for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <Hitachi HTS545032B9A300> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 pciide1 at pci0 dev 31 function 5 "Intel 3400 SATA" rev 0x06: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 1 int 19 (irq 11) for native-PCI interrupt itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x06 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed sd0: 1876MB, 512 bytes/sec, 3842048 sec total uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uvideo0 at uhub2 port 4 configuration 1 interface 0 "Realtek 2SF001" rev 2.00/12.13 addr 3 video0 at uvideo0 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 umass0 at uhub3 port 5 configuration 1 interface 0 "TOSHIBA Optical Drive Controller" rev 2.00/0.00 addr 3 umass0: using ATAPI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 cd0 at scsibus1 targ 1 lun 0: <MATSHITA, DVD-RAM UJ-844S, 1.30> ATAPI 5/cdrom removable vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b -- Peter Ericson
