On Sat, Apr 16, 2011 at 12:25:12AM +0300, Oleksii Zhmyrov wrote:
> >I'm trying 4.9 snapshot from April 13 iso inside a VM with vmware
> >ws 7.0 in windows 7.
> >
> >initially the system appears to boot fine but then it show the
> >following message:
> >
> >
> >
> >bha3: model BT-958, firmware 5.07B
> >bha3: sync, parity
> >scsibus1 at bha3: 8 targets, initiator 7
> >uvm_fault(0xd07e7024, 0x0, 0m 3) -> e
> >fatal page fault (6) in supervisor mode
> >trap type 6 code eie d03a644c cs 8 eflags 10286 cr2 18 cpl 50
> >panic: trap type 6, code=2, pc=d032a644c
> >
> >The operating system has halted.
> >Please press any key to reboot.
> >
> >
> >I have run older isos of 4.9 snapshot (from february and january)
> >and these run fine.
> >
> >
> I use 4.9-current on VMware too and this error appeared after some changes
> in scsi support on April 5, 2011.
>
> --
> Oleksii Zhmyrov
> National Technical University of Ukraine "Kyiv Polytechnic Institute",
> Institute of Physics and Technology
> Tel: +38 (063) 496 2695
>
Just committed a fix for an uninitialize variable. Please let me know if
this was the problem! Appended below for the impatient.
.... Ken
Index: bha.c
===================================================================
RCS file: /cvs/src/sys/dev/ic/bha.c,v
retrieving revision 1.27
diff -u -p -r1.27 bha.c
--- bha.c 3 Apr 2011 12:42:36 -0000 1.27
+++ bha.c 16 Apr 2011 02:43:15 -0000
@@ -467,7 +467,7 @@ bha_ccb_free(xsc, xccb)
void *xsc, *xccb;
{
struct bha_softc *sc = xsc;
- struct bha_ccb *ccb;
+ struct bha_ccb *ccb = xccb;
bha_reset_ccb(sc, ccb);
