Hello jeanfrancois, jfsimon1...@gmail.com (jeanfrancois), 2011.06.01 (Wed) 19:00 (CEST): > I have seen the battery monitoring working properly after starting apmd
What does "I have seen" mean in terms of time that passed since then? > however it just disappeared and I'm not able to make it work again, it What happened between "it worked" and "just disappeared"? > results in > Battery state: absent, 0% remaining, unknown life estimate > Any idea how to make it properly work ? Just a wild guess: You might have moved from apm to acpi: http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=6569 (Do not get bored scrolling down that page, there is an important point at the bottom.) What exactly is your computer manufacturer and type? How old is it? You could try using apm instead of acpi - if your computer supports it. (Do not blame me in case it does not.) Marcus > OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Genuine Intel(R) CPU T1400 @ 1.73GHz ("GenuineIntel" 686-class) > 2.17 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM > real mem = 3184750592 (3037MB) > avail mem = 3122503680 (2977MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 05/22/09, BIOS32 rev. 0 @ 0xf0010, > SMBIOS rev. 2.5 @ 0xfce70 (31 entries) > bios0: vendor American Megatrends Inc. version "1.03" date 05/22/2009 > bios0: ASRock Golden Series > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG ECDT DBGP BOOT OEMB HPET GSCI ATKG > SSDT > acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB5(S3) EUSB(S3) > USB3(S3) USB4(S3) USB6(S3) USBE(S3) HDAC(S3) P0P1(S4) GLAN(S4) P0P2(S3) > WLAN(S3) P0P3(S3) P0P4(S3) P0P5(S3) P0P8(S4) P0P9(S3) SLPB(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 166MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Genuine Intel(R) CPU T1400 @ 1.73GHz ("GenuineIntel" 686-class) > 2.17 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiec0 at acpi0 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus 2 (P0P2) > acpiprt3 at acpi0: bus 3 (P0P3) > acpiprt4 at acpi0: bus 5 (P0P4) > acpiprt5 at acpi0: bus 6 (P0P5) > acpicpu0 at acpi0: C2, C1 > acpicpu1 at acpi0: C2, C1 > acpitz0 at acpi0: critical temperature 112 degC > acpiac0 at acpi0: AC unit in unknown state > acpibat0 at acpi0: BAT0 not present > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: LID_ > acpivideo0 at acpi0: VGA_ > acpivout0 at acpivideo0: DVID > acpivout1 at acpivideo0: CRTD > acpivout2 at acpivideo0: LCDD > acpivout3 at acpivideo0: HDMI > bios0: ROM list: 0xc0000/0x10000! > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1: apic 2 int 16 (irq 10) > drm0 at inteldrm0 > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int > 16 (irq 10) > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int > 21 (irq 7) > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int > 19 (irq 3) > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int > 18 (irq 6) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic > 2 int 22 (irq 4) > azalia0: codecs: Realtek ALC662, AT&T/Lucent/0x1040, Intel/0x2802, using > Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 int > 16 (irq 10) > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D > (0x2800), apic 2 int 16 (irq 10), address 00:26:18:47:d2:f0 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2 int > 17 (irq 5) > pci2 at ppb1 bus 2 > athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17 > (irq 5) > athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:0a:c8:a4 > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2 int > 18 (irq 6) > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 2 int > 19 (irq 3) > pci4 at ppb3 bus 5 > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 2 int > 16 (irq 10) > pci5 at ppb4 bus 6 > ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03 > pci6 at ppb5 bus 7 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int > 23 (irq 10) > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int > 19 (irq 3) > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int > 18 (irq 6) > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int > 23 (irq 10) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci7 at ppb6 bus 8 > pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03 > pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 19 (irq 3) for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST9160310AS> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <Slimtype, DVD A DS8A3S, HA24> ATAPI > 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > uvideo0 at uhub0 port 2 configuration 1 interface 0 "SuYin USB 2.0 UVC > 1.3M WebCam" rev 2.00/1.11 addr 2 > video0 at uvideo0 > umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" > rev 2.00/58.88 addr 3 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 > 0/direct removable > sd0: 1964MB, 512 bytes/sec, 4022272 sec total > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > sd0 detached > scsibus1 detached > umass0 detached > umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" > rev 2.00/58.88 addr 3 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 > 0/direct removable > sd0: 1964MB, 512 bytes/sec, 4022272 sec total > sd0 detached > scsibus1 detached > umass0 detached > umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" > rev 2.00/58.88 addr 3 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 > 0/direct removable > sd0: 1964MB, 512 bytes/sec, 4022272 sec total > sd0 detached > scsibus1 detached > umass0 detached > umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" > rev 2.00/58.88 addr 3 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 > 0/direct removable > sd0: 1964MB, 512 bytes/sec, 4022272 sec total > syncing disks... > OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Genuine Intel(R) CPU T1400 @ 1.73GHz ("GenuineIntel" 686-class) > 2.17 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM > real mem = 3184750592 (3037MB) > avail mem = 3122503680 (2977MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 05/22/09, BIOS32 rev. 0 @ 0xf0010, > SMBIOS rev. 2.5 @ 0xfce70 (31 entries) > bios0: vendor American Megatrends Inc. version "1.03" date 05/22/2009 > bios0: ASRock Golden Series > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG ECDT DBGP BOOT OEMB HPET GSCI ATKG > SSDT > acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB5(S3) EUSB(S3) > USB3(S3) USB4(S3) USB6(S3) USBE(S3) HDAC(S3) P0P1(S4) GLAN(S4) P0P2(S3) > WLAN(S3) P0P3(S3) P0P4(S3) P0P5(S3) P0P8(S4) P0P9(S3) SLPB(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 166MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Genuine Intel(R) CPU T1400 @ 1.73GHz ("GenuineIntel" 686-class) > 2.17 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiec0 at acpi0 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus 2 (P0P2) > acpiprt3 at acpi0: bus 3 (P0P3) > acpiprt4 at acpi0: bus 5 (P0P4) > acpiprt5 at acpi0: bus 6 (P0P5) > acpicpu0 at acpi0: C2, C1 > acpicpu1 at acpi0: C2, C1 > acpitz0 at acpi0: critical temperature 112 degC > acpiac0 at acpi0: AC unit in unknown state > acpibat0 at acpi0: BAT0 not present > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: LID_ > acpivideo0 at acpi0: VGA_ > acpivout0 at acpivideo0: DVID > acpivout1 at acpivideo0: CRTD > acpivout2 at acpivideo0: LCDD > acpivout3 at acpivideo0: HDMI > bios0: ROM list: 0xc0000/0x10000! > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1: apic 2 int 16 (irq 10) > drm0 at inteldrm0 > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int > 16 (irq 10) > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int > 21 (irq 7) > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int > 19 (irq 3) > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int > 18 (irq 6) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic > 2 int 22 (irq 4) > azalia0: codecs: Realtek ALC662, AT&T/Lucent/0x1040, Intel/0x2802, using > Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 int > 16 (irq 10) > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D > (0x2800), apic 2 int 16 (irq 10), address 00:26:18:47:d2:f0 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2 int > 17 (irq 5) > pci2 at ppb1 bus 2 > athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17 > (irq 5) > athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:0a:c8:a4 > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2 int > 18 (irq 6) > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 2 int > 19 (irq 3) > pci4 at ppb3 bus 5 > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 2 int > 16 (irq 10) > pci5 at ppb4 bus 6 > ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03 > pci6 at ppb5 bus 7 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int > 23 (irq 10) > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int > 19 (irq 3) > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int > 18 (irq 6) > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int > 23 (irq 10) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci7 at ppb6 bus 8 > pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03 > pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 19 (irq 3) for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST9160310AS> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <Slimtype, DVD A DS8A3S, HA24> ATAPI > 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > uvideo0 at uhub0 port 2 configuration 1 interface 0 "SuYin USB 2.0 UVC > 1.3M WebCam" rev 2.00/1.11 addr 2 > video0 at uvideo0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" > rev 2.00/58.88 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 > 0/direct removable > sd0: 1964MB, 512 bytes/sec, 4022272 sec total
