On Fri, 3 Jun 2011, Dave Anderson wrote:
>On Fri, 3 Jun 2011, Kenneth R Westerback wrote:
>
>>On Fri, Jun 03, 2011 at 01:09:47PM -0400, Dave Anderson wrote:
>>> While gathering notebook dmesgs I encountered this panic during boot (at
>>> a Best Buy, on a demo system labelled Toshiba r835-p50x, booting from
>>> a USB stick loaded with an i386 snapshot dated 5/24). The root device
>>> DUID shown is correct.
>>>
>>> panic: root device (e0166bb8f33fc15d) not found
>>> stopped at Debugger_0x4: popl %ebp
>>>
>>> [trace]
>>> Debugger(d08e2194.d0ba9d54.d08bf2f0.d0ba9d54.15c6a) at Debugger+0x4
>>> panic(d08bf2f0.e0.16.6b.b8) at panic+0x5d
>>> setroot(d3a99800.0.4000.d0ba9e94.0) at setroot+0xa05
>>> diskconf(d08b73d7.0.d08bd109.0,0) at diskconf+0x12e
>>> main(d02004ba.d02004c2.0.0.0) at main+0x570
>>>
>>> [ps]
>>> PID PPID PGRP UID S FLAGS WAIT COMMAND
>>> 9 0 0 0 3 0x100200 bored crypto
>>> 8 0 0 0 3 0x100200 pftm pfpurge
>>> 7 0 0 0 3 0x100200 usbtsk usbtask
>>> 6 0 0 0 3 0x100200 usbatsk usbatsk
>>> 5 0 0 0 3 0x100200 acpi0 acpi0
>>> 4 0 0 0 3 0x100200 bored syswq
>>> 3 0 0 0 3 0x40100200 idle0
>>> 2 0 0 0 3 0x100200 kmalloc kmthread
>>> 1 0 0 0 3 0 initexec swapper
>>> * 0 -1 0 0 7 0x80200 swapper
>>>
>>> [All of the above was hand-copied from the screen, so there may be
>>> typos.]
>>>
>>> I hope that this is enough information to enable someone to track down
>>> the problem. If more is needed, let me know what it is and I'll try to
>>> get it.
>>>
>>> Dave
>>>
>>> --
>>> Dave Anderson
>>> <d...@daveanderson.com>
>>
>>The dmesg is needed. This looks like the disk/usb stick is not being
>>found by the OS.
>
>I was afraid of that.
>
>Dealing with the first apparent problem, that most of the dmesg scrolls
>off the screen, looks to be easy; a quick look at the source reveals
>that ddb has an apparently undocumented 'dmesg' command.
>
>Actually capturing the dmesg looks to be harder; given that this is a
>store demo system to which I have very limited access I'm not sure I've
>got any better way than hand-writing it all. I've got a couple of ideas
>for easier ways to try, but it will take a few days. Are there any
>parts of the dmesg that are known to be unnecessary for this purpose, so
>I can avoid the work of copying them if I have to fall back to writing
>everything down and retyping it?
>
>Now that I've had time to think about this a bit, I'd guess that the
>problem is some new USB controller that OpenBSD doesn't yet understand.
>If so, am I correct that all that's really needed is the vendor ID and
>device ID of the controller? I'll check for this first, now that I know
>how to view the whole dmesg after the panic.
>
>FWIW this stick boots just fine on lots of other systems, both before
>and after this problem system.
I got a chance to poke at this system again today, and found a USB port
from which I could boot. The offending device appears to be '"NEC
PCIE-XHCI" rev 0x04 at pci4 dev 0 function 0 not configured'. I also
found another system (labelled Dell Inspiron 17r-6457dbk) which exhibits
a similar problem but again was able to find a working USB port; this
appears to use the same new device: '"NEC PCIE-XHCI" rev 0x04 at pci2
dev 0 function 0 not configured'.
I'm sending both dmesgs to dm...@openbsd.org and also including them
here in case that's useful.
Dave
OpenBSD 4.9-current (GENERIC) #3: Mon May 23 21:40:58 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz ("GenuineIntel" 686-class) 2.10
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX
real mem = 2853560320 (2721MB)
avail mem = 2796097536 (2666MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/04/11, SMBIOS rev. 2.5 @ 0xaaefe000
(43 entries)
bios0: vendor TOSHIBA version "Version 2.10" date 03/04/2011
bios0: TOSHIBA PORTEGE R835
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! BOOT SLIC SSDT SSDT SSDT SSDT
acpi0: wakeup devices LANC(S4) HDEF(S3) RP02(S4) PXSX(S4) RP04(S4) PXSX(S4)
USBB(S4) USBC(S4) EHC1(S4) EHC2(S4) PWRB(S4) LID_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 4 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus 5 (RP05)
acpiprt7 at acpi0: bus 6 (RP06)
acpiprt8 at acpi0: bus 7 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PCIB)
acpicpu0 at acpi0: C3, C1, PSS
acpipwrres0 at acpi0: PDOC
acpitz0 at acpi0: critical temperature 102 degC
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID_
acpibat0 at acpi0: BAT1 model "G71C000BE710" serial 0000002275 type Li-ION
oem "0"
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD02
bios0: ROM list: 0xc0000/0xee00 0xcf000/0x1000 0xe0000/0x10000!
cpu0: Enhanced SpeedStep 2096 MHz: speeds: 2100, 2000, 1900, 1800, 1700, 1600,
1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel GT2 Video" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp at vga1 not configured
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579V" rev 0x04: apic 2 int 20, address
e8:9d:87:24:5b:1f
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: apic 2
int 22
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 16
pci1 at ppb0 bus 1
vendor "Ricoh", unknown product 0xe823 (class system subclass miscellaneous,
rev 0x04) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 17
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 18
pci3 at ppb2 bus 4
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6250" rev 0x5f: apic 2
int 18, MIMO 1T2R, MoW, address 00:23:15:b4:f0:00
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 16
pci4 at ppb3 bus 5
"NEC PCIE-XHCI" rev 0x04 at pci4 dev 0 function 0 not configured
ppb4 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 17
pci5 at ppb4 bus 6
ppb5 at pci0 dev 28 function 6 "Intel 82801BAM Hub-to-PCI" rev 0xb4: apic 2 int
18
pci6 at ppb5 bus 7
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM65 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: apic 2 int 19,
AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54756, JEDO> SCSI3 0/direct
fixed naa.5000cca643c0dad8
sd0: 610480MB, 512 bytes/sec, 1250263728 sec total
cd0 at scsibus0 targ 2 lun 0: <MATSHITA, DVD-RAM UJ8A2ES, 1.20> ATAPI 5/cdrom
removable
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2
umass0 at uhub3 port 2 configuration 1 interface 0 "HP v125w" rev 2.00/40.96
addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <hp, v125w, 4096> SCSI0 0/direct removable
serial.03f03307104A00000902
sd1: 3864MB, 512 bytes/sec, 7913472 sec total
ugen0 at uhub3 port 6 "Intel(R) Corporation Intel(R) Centrino(R) Advanced-N +
WiMAX 6250" rev 2.00/0.00 addr 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd1a (e0166bb8f33fc15d.a) swap on sd1b dump on sd1b
OpenBSD 4.9-current (GENERIC) #3: Mon May 23 21:40:58 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz ("GenuineIntel" 686-class) 2.30
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX
real mem = 3133259776 (2988MB)
avail mem = 3071229952 (2928MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/25/11, BIOS32 rev. 0 @ 0xfc000, SMBIOS
rev. 2.6 @ 0xf94b0 (69 entries)
bios0: vendor Dell Inc. version "A04" date 03/25/2011
bios0: Dell Inc. Dell System Inspiron N7110
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC BOOT SSDT ASF! HPET APIC MCFG SSDT SSDT UEFI UEFI
UEFI
acpi0: wakeup devices P0P1(S4) EHC1(S0) EHC2(S0) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP03(S3) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PEG0(S4)
PEGP(S4) LID0(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus 2 (RP03)
acpiprt5 at acpi0: bus 3 (RP05)
acpiprt6 at acpi0: bus 4 (RP06)
acpiprt7 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 100 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x1000
cpu0: Enhanced SpeedStep 2293 MHz: speeds: 2301, 2300, 1800, 1600, 1400, 1200,
1000, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel GT2 Video" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp at vga1 not configured
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: apic 2
int 22
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 16
pci1 at ppb0 bus 1
iwn0 at pci1 dev 0 function 0 "Intel WiFi Link 1030" rev 0x34: apic 2 int 16,
MIMO 1T2R, BGN, address bc:77:37:67:5a:bb
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 18
pci2 at ppb1 bus 2
"NEC PCIE-XHCI" rev 0x04 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 16
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), apic
2 int 16, address 14:fe:b5:a3:fa:b7
ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI 0x000732,
model 0x0008
ppb3 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 17
pci4 at ppb3 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM67 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: apic 2 int 19,
AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD6400BPVT-7, 01.0> SCSI3 0/direct
fixed naa.50014ee6abc58781
sd0: 610480MB, 512 bytes/sec, 1250263728 sec total
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVD+-RW GT32N, A202> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2
umass0 at uhub2 port 1 configuration 1 interface 0 "Generic USB2.0-CRW" rev
2.00/38.82 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
removable serial.0bda0138516388200000
uvideo0 at uhub2 port 4 configuration 1 interface 0 "CKFA156F3020300045B0
Laptop_Integrated_Webcam_HD" rev 2.00/29.55 addr 4
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "HP v125w" rev 2.00/40.96
addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <hp, v125w, 4096> SCSI0 0/direct removable
serial.03f03307104A00000902
sd2: 3864MB, 512 bytes/sec, 7913472 sec total
ugen0 at uhub3 port 5 "Intel product 0x0189" rev 2.00/69.19 addr 4
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on sd2a (e0166bb8f33fc15d.a) swap on sd2b dump on sd2b
--
Dave Anderson
<d...@daveanderson.com>
