On a machine that I put a new 4.9 up on (dmesg included below)
emacs (and only emacs I have far found) goes into an unbreakable loop on it
startup within X
emacs -nw works, emacs -q does not.
emacs works if displaying on a remote system.
I use emacs on other 4.9 systems so I assume that the problem is caused by X.
Once I have the loop within emacs I cannot get the window manager to kill it(I
am using icewm)
I have to use a separate xterm and kill .
OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 3.20GHz ("GenuineIntel" 686-class) 3.16 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,CNXT-ID,CX16,
xTPR,PDCM
real mem = 3219611648 (3070MB)
avail mem = 3156795392 (3010MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/17/06, BIOS32 rev. 0 @ 0xfd470,
SMBIOS rev. 2.51 @ 0xbfeea000 (33 entries)
bios0: vendor Phoenix Technologies LTD version "6.00" date 04/17/2006
bios0: Supermicro PDSMi
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP MCFG APIC BOOT ASF! SSDT
acpi0: wakeup devices DEV1(S5) EXP1(S5) PXHA(S5) EXP5(S5) EXP6(S5) PCIB(S5)
KBC0(S1) MSE0(S1) USB1(S4) USB2(S4) USB3(S4) USB4(S4) EUSB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-9
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 197MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.20GHz ("GenuineIntel" 686-class) 3.16 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,CNXT-ID,CX16,
xTPR,PDCM
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfec10000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (DEV1)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (PXHA)
acpiprt4 at acpi0: bus 4 (EXP5)
acpiprt5 at acpi0: bus 5 (EXP6)
acpiprt6 at acpi0: bus 10 (PCIB)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0x81
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x81: apic 2 int 16 (irq
10)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17
(irq 11)
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
unknown vendor 0x12e4 product 0x1120 (class network subclass miscellaneous,
rev 0x00) at pci3 dev 1 function 0 not configured
"Intel IOxAPIC" rev 0x09 at pci2 dev 0 function 1 not configured
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 int 17
(irq 11)
pci4 at ppb3 bus 4
em0 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 2 int
16 (irq 10), address 00:30:48:56:7c:32
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 int 16
(irq 10)
pci5 at ppb4 bus 5
em1 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 2 int
17 (irq 11), address 00:30:48:56:7c:33
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
(irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
(irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
(irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci6 at ppb5 bus 10
vga1 at pci6 dev 0 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: apic 2 int 19
(irq 10), AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1600AAJS-0, 05.0> SCSI3 0/direct
fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD1600JS-60N, 10.0> SCSI3 0/direct
fixed
sd1: 152627MB, 512 bytes/sec, 312581808 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int
19 (irq 10)
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627HF
lm2 at iic0 addr 0x2f: W83792D rev D
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
"eeprom" at iic0 addr 0x51 not configured
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
"eeprom" at iic0 addr 0x53 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm3 at wbsio0 port 0x290/8: W83627HF
lm1 detached
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
