On Mon, 20 Jun 2011, Jan Stary wrote: > On my installation of current/amd64, the local services > somehow do not start at boot. This is the situation: > > # ls -l /etc/rc.d > total 32 > -r-xr-xr-x 1 root bin 276 Jun 7 20:38 avahi_daemon > -r-xr-xr-x 1 root bin 281 Jun 7 20:38 avahi_dnsconfd > -r-xr-xr-x 1 root bin 1431 Jun 7 19:05 cupsd > -r-xr-xr-x 1 root bin 359 Jun 7 18:57 dbus_daemon > -r-xr-xr-x 1 root bin 523 Jun 20 16:23 postgresql > -rw-r--r-- 1 root wheel 2281 Jun 10 03:02 rc.subr > -r-xr-xr-x 1 root bin 174 Jun 7 18:53 saslauthd > > # cat /etc/rc.conf.local > ntpd_flags="-s" > apmd_flags="-C -t 300" > pflogd_flags="-s 256" > aucat_flags="" > lpd_flags="-ls" > httpd_flags="-u" > > rc_scripts=" postgresql cupsd " > > > This should be enough for postgresql and cups to start at boot, right? > But the boot sequence says simply > > 'starting local daemons:.'
This is for daemons in rc.local. Watch the output of starting package daemons: > > and doesn't even try to start them. > > It is not a problem with postgresql or cupsd itself. > If I run e.g. > > /etc/rc.d/postgresl start > > manually after boot, it starts just fine. > The problem is that rc.d doesn't try to start them _at_boot_. > > Am I missing something obvious? > > Thank you for your time > > Jan > > > OpenBSD 4.9-current (GENERIC.MP) #0: Sun Jun 19 15:03:26 CEST 2011 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2646556672 (2523MB) > avail mem = 2561974272 (2443MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0000 (44 entries) > bios0: vendor Apple Inc. version "MB31.88Z.008E.B02.0803051832" date 03/05/08 > bios0: Apple Inc. MacBook3,1 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT SSDT SSDT > acpi0: wakeup devices ADP1(S3) LID0(S3) ARPT(S3) GIGE(S3) UHC1(S3) UHC2(S3) > UHC3(S3) UHC4(S3) UHC5(S3) EHC1(S3) EHC2(S3) EC__(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz, 1995.34 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG > cpu0: 4MB 64b/line 16-way L2 cache > cpu0: apic clock running at 199MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz, 1995.00 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG > cpu1: 4MB 64b/line 16-way L2 cache > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 1 > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (RP05) > acpiprt2 at acpi0: bus 3 (RP06) > acpiprt3 at acpi0: bus 4 (PCIB) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpiac0 at acpi0: AC unit offline > acpibtn0 at acpi0: LID0 > acpibtn1 at acpi0: PWRB > acpibtn2 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "15253732082930497" type 15253732284385612 oem > "15253732284452179" > acpivideo0 at acpi0: GFX0 > cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2000, 1800, 1600, 1400, 1200, 800 > MHz > memory map conflict 0xf00f8000/0x1000 > memory map conflict 0xfed1c000/0x4000 > memory map conflict 0xfffa0000/0x30000 > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03 > vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xa0000000, size 0x10000000 > inteldrm0 at vga1: msi > drm0 at inteldrm0 > "Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20 > uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 16 > ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 21 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: msi > azalia0: codecs: Realtek ALC885 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1 int 16 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 16 > pci2 at ppb1 bus 2 > "Broadcom BCM4321" rev 0x03 at pci2 dev 0 function 0 not configured > ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x03: apic 1 int 17 > pci3 at ppb2 bus 3 > mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8058" rev 0x13, Yukon-2 EC > Ultra rev. B0 (0x3): apic 1 int 17 > msk0 at mskc0 port A: address 00:1b:63:aa:12:67 > eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 > uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 > uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 18 > uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 21 > ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 20 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 > pci4 at ppb3 bus 4 > "AT&T/Lucent FW322 1394" rev 0x61 at pci4 dev 3 function 0 not configured > pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03 > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8221, GA0K> ATAPI 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 1 int 18 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <ST980811AS> > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 20 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > uvideo0 at uhub1 port 4 configuration 1 interface 0 "Micron Built-in iSight" > rev 2.00/1.84 addr 2 > video0 at uvideo0 > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Apple Computer ADB > device" rev 2.00/19.65 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub2 port 1 configuration 1 interface 1 "Apple Computer ADB > device" rev 2.00/19.65 addr 2 > uhidev1: iclass 3/1 > ums0 at uhidev1: 5 buttons > wsmouse0 at ums0 mux 0 > uhidev2 at uhub6 port 1 configuration 1 interface 0 "Apple Computer, Inc. IR > Receiver" rev 2.00/0.16 addr 2 > uhidev2: iclass 3/0, 38 report ids > uhid0 at uhidev2 reportid 36: input=4, output=0, feature=0 > uhid1 at uhidev2 reportid 37: input=4, output=0, feature=0 > uhid2 at uhidev2 reportid 38: input=4, output=0, feature=0 > uhidev3 at uhub6 port 2 configuration 1 interface 0 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/0.09 addr 3 > uhidev3: iclass 3/1 > ukbd1 at uhidev3: 8 modifier keys, 5 key codes, country code 13 > wskbd1 at ukbd1 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev4 at uhub6 port 2 configuration 1 interface 1 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/0.09 addr 3 > uhidev4: iclass 3/1, 5 report ids > ums1 at uhidev4 reportid 2: 3 buttons > wsmouse1 at ums1 mux 0 > ums2 at uhidev4 reportid 5 > ums2: mouse has no X report > uhidev5 at uhub6 port 2 configuration 1 interface 2 "Apple Inc. Apple > Internal Keyboard / Trackpad" rev 2.00/0.09 addr 3 > uhidev5: iclass 3/0 > uhid3 at uhidev5: input=1, output=0, feature=0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > root on wd0a (9d9e8494d88f41c5.a) swap on wd0b dump on wd0b > > -- Antoine
