Allright, I disabled bge0 on BIOS SETUP but the error continues:
pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA
(unsupported), channel 0 configured to native-PCI, channel 1
configured to native-PCI
2011/7/7 Zeb Packard <zeb.pack...@gmail.com>
> *Sorry about the direct response Nick. :0
>
> These two lines make me think it's a configuration problem.
>
> bge0 at pci7 dev 0 function 0 "Broadcom BCM57788" rev 0x01, BCM57780
> A1 (0x57780001): apic 0 int 17 (irq 10), address 00:22:4d:4c:40:ee
> brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
>
>
>
>
> Dmesg below.
>
> penBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz ("GenuineIntel" 686-class) 3
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE
> real mem = 2135498752 (2036MB)
> avail mem = 2090401792 (1993MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 05/10/10, SMBIOS rev. 2.6 @
> 0xe9230 (58 entries)
> bios0: vendor Intel Corp. version "RKG4310H.86A.0082.2010.0510.1954"
> date 05/10/2010
> bios0: Intel Corporation DP43BF
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S1 S3 S4 S5
> acpi0: tables DSDT FACP APIC MCFG HPET
> acpi0: wakeup devices P0P1(S3) PS2K(S4) PS2M(S4) UAR1(S3) P0P2(S4)
> USB0(S3) USB1(S3) USB2(S3) USB5(S3) USB6(S3) EUSB(S3) USB3(S3)
> USB4(S3) USBE(S3) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4)
> PEX5(S4) SLPB(S4) PWRB(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 199MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz ("GenuineIntel" 686-class) 3
> GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 32 (P0P2)
> acpiprt2 at acpi0: bus 2 (PEX0)
> acpiprt3 at acpi0: bus 3 (PEX1)
> acpiprt4 at acpi0: bus 4 (PEX2)
> acpiprt5 at acpi0: bus 5 (PEX3)
> acpiprt6 at acpi0: bus 6 (PEX4)
> acpiprt7 at acpi0: bus 7 (PEX5)
> acpicpu0 at acpi0:, C3, C2, C1, PSS
> acpicpu1 at acpi0:, C3, C2, C1, PSS
> acpibtn0 at acpi0: SLPB
> acpibtn1 at acpi0: PWRB
> bios0: ROM list: 0xc0000/0xe600! 0xce800/0x400 0xcf000/0x2400
> cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2800, 2600, 2400,
> 2200, 2000, 1800, 1600, 1400, 1200 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel G45 PCIE" rev 0x03: apic 0 int 16 (irq
> 11)
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x10c3 rev
> 0xa2
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> azalia0 at pci1 dev 0 function 1 vendor "NVIDIA", unknown product
> 0x0be3 rev 0xa1: apic 0 int 17 (irq 10)
> azalia0: no supported codecs
> azalia0: initialization failure, detaching
> uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0
> int 16 (irq 11)
> uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0
> int 21 (irq 5)
> uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 0
> int 18 (irq 3)
> ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0
> int 18 (irq 3)
> ehci0: timed out waiting for BIOS
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia1 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00:
> apic 0 int 22 (irq 7)
> azalia1: codecs: Realtek ALC888
> audio0 at azalia1
> ppb1 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 0
> int 17 (irq 10)
> pci2 at ppb1 bus 2
> pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA
> (unsupported), channel 0 configured to native-PCI, channel 1
> configured to native-PCI
> pciide0: using apic 0 int 16 (irq 11) for native-PCI interrupt
> pciide0: channel 0 ignored (not responding; disabled or no drives?)
> pciide0: channel 1 ignored (not responding; disabled or no drives?)
> ppb2 at pci0 dev 28 function 1 "Intel 82801JI PCIE" rev 0x00: apic 0
> int 16 (irq 11)
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 2 "Intel 82801JI PCIE" rev 0x00: apic 0
> int 18 (irq 3)
> pci4 at ppb3 bus 4
> ppb4 at pci0 dev 28 function 3 "Intel 82801JI PCIE" rev 0x00: apic 0
> int 19 (irq 11)
> pci5 at ppb4 bus 5
> ppb5 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: apic 0
> int 17 (irq 10)
> pci6 at ppb5 bus 6
> vendor "VIA", unknown product 0x3403 (class serial bus subclass
> Firewire, rev 0x00) at pci6 dev 0 function 0 not configured
> ppb6 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00: apic 0
> int 16 (irq 11)
> pci7 at ppb6 bus 7
> bge0 at pci7 dev 0 function 0 "Broadcom BCM57788" rev 0x01, BCM57780
> A1 (0x57780001): apic 0 int 17 (irq 10), address 00:22:4d:4c:40:ee
> brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
> uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0
> int 23 (irq 10)
> uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0
> int 19 (irq 11)
> uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0
> int 18 (irq 3)
> ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0
> int 23 (irq 10)
> ehci1: timed out waiting for BIOS
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
> pci8 at ppb7 bus 32
> pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
> pciide1 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 0 int 19 (irq 11) for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD502HJ>
> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic
> 0 int 18 (irq 3)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600
> pciide2 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide2: using apic 0 int 19 (irq 11) for native-PCI interrupt
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> it0 at isa0 port 0x2e/2: IT8721F rev 1, EC port 0xa00
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> vscsi0 at root
> scsibus0 at vscsi0: 256 targets
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
