(a) not enough information (b) you enabled things which are disabled for a good reason.
> Hi Misc@, > Getting this panic over and over on a router. Something with uvm and > tcp_input. IPMI was enabled to get system sensors. > > dmesg 29 May > ------------ > > OpenBSD 4.9-current (GENERIC.MP) #20: Sun May 29 04:42:43 WIT 2011 > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > RTC BIOS diagnostic error e<fixed_disk,invalid_time> > cpu0: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz ("GenuineIntel" 686-class) 3 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX1 > 6,xTPR,PDCM,SSE4.1 > real mem = 2143801344 (2044MB) > avail mem = 2097905664 (2000MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 12/12/07, SMBIOS rev. 2.5 @ > 0x7fdfd000 (63 entries) > bios0: vendor Intel Corporation version > "S3200X38.86B.00.00.0045.082820081329" date 08/28/2008 > bios0: Intel Corporation S3210SH > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S4 S5 > acpi0: tables DSDT SLIC FACP APIC WDDT MCFG HPET SPCR SSDT SSDT SSDT SSDT > SSDT HEST BERT ERST EINJ DMAR > acpi0: wakeup devices SLPB(S5) NPE1(S5) NPE6(S5) P32_(S5) PS2M(S1) > PS2K(S1) ILAN(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5) > UHC1(S1) UHC2(S1) UHC3(S1) UH > C4(S1) EHCI(S1) EHC2(S1) UH42(S1) UHC5(S1) UHC6(S1) AZAL(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 332MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz ("GenuineIntel" 686-class) 3 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX1 > 6,xTPR,PDCM,SSE4.1 > ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 5 > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (NPE1) > acpiprt2 at acpi0: bus 1 (NPE6) > acpiprt3 at acpi0: bus 4 (P32_) > acpiprt4 at acpi0: bus 2 (PEX0) > acpiprt5 at acpi0: bus -1 (PEX1) > acpiprt6 at acpi0: bus -1 (PEX2) > acpiprt7 at acpi0: bus -1 (PEX3) > acpiprt8 at acpi0: bus 3 (PEX4) > acpiprt9 at acpi0: bus -1 (PEX5) > acpicpu0 at acpi0: PSS > acpicpu1 at acpi0: PSS > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: PWRB > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000 > 0xca000/0x1000 0xcb000/0x1800 0xcc800/0x1000 > ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 > cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2000 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x00 > ppb0 at pci0 dev 6 function 0 "Intel 3210 PCIE" rev 0x00: apic 5 int 16 > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic > 5 int 16, address 00:24:81:7d:11:f4 > em1 at pci1 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic > 5 int 17, address 00:24:81:7d:11:f5 > em2 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: apic 5 int > 20, address 00:15:17:8d:4c:c5 > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 18 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 21 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 5 int 17 > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 5 int 17 > pci3 at ppb2 bus 3 > vga1 at pci3 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 23 > uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 19 > uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 5 int 18 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > pci4 at ppb3 bus 4 > em3 at pci4 dev 0 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: apic 5 > int 16, address 00:07:e9:0f:44:37 > skc0 at pci4 dev 1 function 0 "D-Link DGE-530T B1" rev 0x11, Yukon Lite > (0x9): apic 5 int 17 > sk0 at skc0 port A: address 00:1b:11:10:07:6e > eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5 > em4 at pci4 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 5 > int 18, address 00:15:17:8d:4c:c3 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM > disabled > pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 5 int 21 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <MAXTOR STM380215AS> > wd0: 16-sector PIO, LBA48, 76318MB, 156299375 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 5 > int 18 > iic0 at ichiic0 > iic0: skipping sensors to avoid ipmi0 interactions > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5 > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5 > pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 5 int 21 for native-PCI interrupt > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > mtrr: Pentium Pro MTRR support > vscsi0 at root > scsibus0 at vscsi0: 256 targets > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > WARNING: / was not properly unmounted > > ---------------------- > Panic on 29 May Kernel > ---------------------- > > uvm_fault(0xd0a16be0, 0xefffa000, 0, 1) -> d > kernel: page fault trap, code=0 > Stoped at tcp_input+0x44a: movzbl 0xad(%edi),%eax > ddb{0}> > > ---------------------- > ps on 29 May Kernel > ---------------------- > > ddb{0}> ps > PID PPID PGRP UID S FLAGS > WAIT COMMAND > 10095 18628 10095 1008 3 0x2000080 > ttyin ksh > 18628 7307 7307 1008 3 0x2000080 > select sshd > 7307 8357 7307 0 3 0x2000080 > netio sshd > 8242 1 8242 0 3 0x2000080 > ttyin getty > 30121 1 30121 0 3 0x2000080 > ttyin getty > 2165 1 2165 0 3 0x2000080 > select sendmail > 17876 1 17876 0 3 0x2000080 > nanosleep symon > 3162 1 1 0 3 0x2000080 > ttyopn getty > 6334 1 6334 0 3 0x2000080 > ttyin getty > 5417 1 5417 0 3 0x2000080 > ttyin getty > 13655 1 13655 0 3 0x2000080 > ttyin getty > 12870 1 12870 0 3 0x2000080 > ttyin getty > 5130 1 5130 0 3 0x2000080 > select cron > 20031 1 20031 0 3 0x2000080 > select inetd > 15389 3025 3025 75 3 0x2000080 > poll bgpd > 9246 3025 3025 75 3 0x2000080 > poll bgpd > 3025 1 3025 0 3 0x2000080 > poll bgpd > 6121 2127 2127 85 3 0x2000080 > kqread ospfd > 6254 2127 2127 85 3 0x2000080 > kqread ospfd > 2127 1 2127 0 3 0x2000080 > kqread ospfd > 19047 26569 26569 98 3 0x2000080 > kqread ldpd > 11144 26569 26569 98 3 0x2000080 > kqread ldpd > 26569 1 26569 0 3 0x2000080 > kqread ldpd > 21326 7139 7139 91 3 0x2000080 > kqread snmpd > 7139 1 7139 0 3 0x2000080 > kqread snmpd > 8357 1 8357 0 3 0x2000080 > select sshd > 9636 28324 31568 83 3 0x2000080 > poll ntpd > 28328 31568 31568 83 3 0x2000080 > poll ntpd > 31568 1 31568 0 3 0x2000080 > poll ntpd > 11108 2517 2517 74 3 0x2000080 > bpf pflogd > 2517 1 2517 0 3 0x2000080 > netio pflogd > 14197 13930 13930 73 3 0x2000080 > syslogd > 13930 1 13930 0 3 0x2000088 > netio syslogd > 16 0 0 0 3 0x2100200 > aiodoned aiodoned > 15 0 0 0 3 0x2100200 > syncer update > 14 0 0 0 3 0x2100200 > cleaner cleaner > 13 0 0 0 3 0x100200 > reaper reaper > 12 0 0 0 3 0x2100200 > pgdaemon pagedaemon > 11 0 0 0 3 0x2100200 > bored crypto > 10 0 0 0 3 0x2100200 > pftm pfpurge > 9 0 0 0 3 0x2100200 > usbtsk usbtask > 8 0 0 0 3 0x2100200 > usbatsk usbatsk > 7 0 0 0 3 0x2100200 > ipmi_poll ipmi0 > 6 0 0 0 3 0x2100200 > acpi0 acpi0 > 5 0 0 0 3 0x40100200 > idle1 > 4 0 0 0 3 0x2100200 > bored syswq > * 3 0 0 0 3 0x40100200 > idle0 > 2 0 0 0 3 0x2100200 > kmalloc kmthread > 1 0 0 0 3 0x2000080 > wait iit > 0 -1 0 0 3 0x2080200 > scheduler swapper > > > ---------------------- > trace on 29 May Kernel > ---------------------- > > ddb{0}> trace > tcp_input(d8840a00,14,0,0,d30ced08) at tcp_input+0x44a > ipv4_input(d8840a00,6,f5317ef4,d0442d05,d0203772) at ipv4_input+0x558 > ipintr(d0203772,d2f79600,f5317f14,d057fbef,0) at ipintr+0x49 > netintr(0,202,0,0,d020229a) at netintr+0xd5 > softintr_dispatch(1) at softintr_dispatch+0x4f > Xsoftnet() at Xsoftnet+0x17 > --- interrupt --- > cpu_idle_cycle(d0af7100) at cpu_idle_cycle+0xf > Bad frame pointer: 0xd0bafe48 > > > We upgraded to 10 july Kernel, and still got this panic; > > uvm_fault(0xd09fe5e0, 0xefffa000, 0, 1) -> d > kernel: page fault trap, code=0 > stopped at tcp_input+0x44a; movzbl 0xad(%edi),%eax > > -------------- > DMESG 10 July > -------------- > > OpenBSD 4.9-current (GENERIC.MP) #21: Sun Jul 10 19:49:20 WIT 2011 > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > RTC BIOS diagnostic error e<fixed_disk,invalid_time> > cpu0: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz ("GenuineIntel" 686-class) 3 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S > SE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1 > real mem = 2143801344 (2044MB) > avail mem = 2098655232 (2001MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 12/12/07, SMBIOS rev. 2.5 @ > 0x7fdfd000 (63 entries) > bios0: vendor Intel Corporation version > "S3200X38.86B.00.00.0045.082820081329" date 08/28/2008 > bios0: Intel Corporation S3210SH > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S4 S5 > acpi0: tables DSDT SLIC FACP APIC WDDT MCFG HPET SPCR SSDT SSDT SSDT SSDT > SSDT HEST BERT ERST EINJ DMAR > acpi0: wakeup devices SLPB(S5) NPE1(S5) NPE6(S5) P32_(S5) PS2M(S1) > PS2K(S1) ILAN(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4( > S5) PEX5(S5) UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) EHC2(S1) > UH42(S1) UHC5(S1) UHC6(S1) AZAL(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 332MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz ("GenuineIntel" 686-class) 3 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S > SE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1 > ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 5 > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (NPE1) > acpiprt2 at acpi0: bus 1 (NPE6) > acpiprt3 at acpi0: bus 4 (P32_) > acpiprt4 at acpi0: bus 2 (PEX0) > acpiprt5 at acpi0: bus -1 (PEX1) > acpiprt6 at acpi0: bus -1 (PEX2) > acpiprt7 at acpi0: bus -1 (PEX3) > acpiprt8 at acpi0: bus 3 (PEX4) > acpiprt9 at acpi0: bus -1 (PEX5) > acpicpu0 at acpi0: PSS > acpicpu1 at acpi0: PSS > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: PWRB > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000 > 0xca000/0x1000 0xcb000/0x1800 0xcc800/0x1000 > ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 > cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2000 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x00 > ppb0 at pci0 dev 6 function 0 "Intel 3210 PCIE" rev 0x00: apic 5 int 16 > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: msi, > address 00:24:81:7d:11:f4 > em1 at pci1 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: msi, > address 00:24:81:7d:11:f5 > em2 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: msi, address > 00:15:17:8d:4c:c5 > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 18 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 21 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 5 int 17 > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 5 int 17 > pci3 at ppb2 bus 3 > vga1 at pci3 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 23 > uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 19 > uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 5 int 18 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > pci4 at ppb3 bus 4 > em3 at pci4 dev 0 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: apic 5 > int 16, address 00:07:e9:0f:44:37 > skc0 at pci4 dev 1 function 0 "D-Link DGE-530T B1" rev 0x11, Yukon Lite > (0x9): apic 5 int 17 > sk0 at skc0 port A: address 00:1b:11:10:07:6e > eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5 > em4 at pci4 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 5 > int 18, address 00:15:17:8d:4c:c3 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM > disabled > pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, > channel 0 configured to native-PCI, channel 1 configured > to native-PCI > pciide0: using apic 5 int 21 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <MAXTOR STM380215AS> > wd0: 16-sector PIO, LBA48, 76318MB, 156299375 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 5 > int 18 > iic0 at ichiic0 > iic0: skipping sensors to avoid ipmi0 interactions > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5 > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5 > pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, > channel 0 wired to native-PCI, channel 1 wired to native- > PCI > pciide1: using apic 5 int 21 for native-PCI interrupt > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > mtrr: Pentium Pro MTRR support > vscsi0 at root > scsibus0 at vscsi0: 256 targets > softraid0 at root > scsibus1 at softraid0: 256 targets > root on wd0a swap on wd0b dump on wd0b > WARNING: / was not properly unmounted > > > > Can't trace and ps since the guys at NOC didn't had the time to do so. We > are going to temporary disable the services on this machine until we able > to find a workaround. Any suggestion? > > Best Regards, > > > Insan Praja SW > -- > Using Opera's revolutionary email client: http://www.opera.com/mail/
