Greetings,
I tried setting up the following into pf.conf on both 4.9 and latest snapshot:
altq on $ext_if priq queue {q1, q2}
queue q1 priority 1 priq(default)
queue q2 priority 2
pass all queue q1
match all queue q2
And I see nothing going into q2.
Is this the expected behavior?
Thanks for your time.
William
OpenBSD 5.0 (GENERIC) #51: Mon Aug 8 14:51:10 MDT 2011
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 267321344 (254MB)
avail mem = 246370304 (234MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (5 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz, 1976.26 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,MWAIT,SSSE3,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 1000MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpibat0 at acpi0: BAT0 not present
acpiac0 at acpi0: AC unit online
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <VBOX HARDDISK>
wd0: 128-sector PIO, LBA, 2048MB, 4194304 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02:
apic 1 int 19, address 08:00:27:e6:6a:e9
"InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0
not configured
piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: SMBus disabled
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: CPU supports MTRRs but not enabled
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (599187112325ad92.a) swap on wd0b dump on wd0b
