That sounds more like crappy DNS or filtered Internet. I can't speak for chromium but webkit likes >= 256 files >= 16384 stack. Adsuck can go a long way making the surfing experience better too. BTW you can't update things willy nilly, you have to do pretty much all of it at once.
On Tue, Aug 30, 2011 at 11:37:18PM -0500, Bryan wrote: > I am using the latest build of OpenBSD/amd64 (dated Aug 30). > > I have been using Chrome recently, as it appeared to be a little more > stable (the 12.x was anyway). The only annoying issue is that often, > I will try to surf to a page, and the browser just sits there, and > spins and spins and spins. The site isn't down, it just acts like it > doesn't know what to do 'sending request' is all I get, if that. > > Tonight, I built 13.0.782.215, but as pkg_tools is trying to create > the package, I receive the following error: > > Error: Libraries in packing-lists in the ports tree > and libraries from installed packages don't match. > > And it appeared that 'nss' and 'nspr' were not checked to see if they > are updated. So I built them manually. No problem. Now, when I > start chrome, my homepage comes up, but I can't do anything else. No > other sites will load, not yahoo.com, fark.com, gmail, etc. These > sites are not down, and I can't tell why chrome just refuses to > function. Sometimes, I can fix it by hitting "refresh" a few times on > the current page. > > building xxxterm, first gnutls received the above error, looking for > an updated 'hogweed' and 'nettle', I did a bit of hunting, and found > libnettle, and built it. Then I built gnutls, and then xxxterm. > > I got them built, but shouldn't the build look for these issues, and > 'update' to the later version? My mk.conf isn't pulling packages, and > I'm using a -current from less than two hours ago... > > If there is any other info I can provide, please ask. my current > ulimit values, and dmesg are below. > > Bryan > > P.S. Wouldn't you know, after I installed chrome, and rebooted, the > above issue has gone away... for now... well, it's better than > Firefox... > > ulimit -a > # ulimit -a > time(cpu-seconds) unlimited > file(blocks) unlimited > coredump(blocks) unlimited > data(kbytes) 8388608 > stack(kbytes) 8192 > lockedmem(kbytes) 2700382 > memory(kbytes) 8089788 > nofiles(descriptors) 128 > processes 1310 > root@laptop-openbsd /usr/ports/www/xxxterm > # exit > brakeb@laptop-openbsd ~ > $ ulimit -a > time(cpu-seconds) unlimited > file(blocks) unlimited > coredump(blocks) unlimited > data(kbytes) 2097152 > stack(kbytes) 4096 > lockedmem(kbytes) 2700382 > memory(kbytes) 8089788 > nofiles(descriptors) 256 > processes 256 > > > > dmesg: > > > OpenBSD 5.0-current (GENERIC.MP) #78: Tue Aug 30 22:00:22 CDT 2011 > root@laptop-openbsd:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8538869760 (8143MB) > avail mem = 8297443328 (7913MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf6530 (57 entries) > bios0: vendor Dell Inc. version "A24" date 08/19/2010 > bios0: Dell Inc. Latitude E6500 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET DMAR APIC ASF! MCFG SLIC SSDT > acpi0: wakeup devices PCI0(S4) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) > USB4(S0) USB5(S0) USB6(S0) EHC2(S0) EHCI(S0) AZ > AL(S3) RP01(S4) RP02(S4) RP03(S4) RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz, 2660.36 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS, > HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG > cpu0: 3MB 64b/line 8-way L2 cache > cpu0: apic clock running at 266MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz, 2660.00 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS, > HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG > cpu1: 3MB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 2 > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiprt0 at acpi0: bus 3 (PCIE) > acpiprt1 at acpi0: bus -1 (AGP_) > acpiprt2 at acpi0: bus 11 (RP01) > acpiprt3 at acpi0: bus 12 (RP02) > acpiprt4 at acpi0: bus 13 (RP03) > acpiprt5 at acpi0: bus 14 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus -1 (RP06) > acpiprt8 at acpi0: bus 0 (PCI0) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpitz0 at acpi0: critical temperature is 107 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: PBTN > acpibtn2 at acpi0: SBTN > acpiac0 at acpi0: AC unit offline > acpibat0 at acpi0: BAT0 model "DELL KY26603" serial 5171 type LION oem "Sanyo" > acpibat1 at acpi0: BAT1 not present > acpivideo0 at acpi0: VID_ > acpivideo1 at acpi0: VID_ > acpivout0 at acpivideo1: LCD_ > acpivideo2 at acpi0: VID2 > cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2668, 2667, 2134, 1600, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 > inteldrm0 at vga1: apic 2 int 16 > drm0 at inteldrm0 > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, > address 00:ff:aa:c7:4b:48 > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 22 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi > azalia0: codecs: IDT 92HD71B7, Intel/0x2802, using IDT 92HD71B7 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi > pci1 at ppb0 bus 11 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi > pci2 at ppb1 bus 12 > ral0 at pci2 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 2 int 17, > address 00:ff:aa:34:99:77 > ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R) > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi > pci3 at ppb2 bus 13 > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi > pci4 at ppb3 bus 14 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20 > usb1 at ehci1: USB revision 2.0 > u5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20 > usb1 at ehci1: USB revision 2.0uhub1 at usb1 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci5 at ppb4 bus 3 > cbb0 at pci5 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2 int 19 > "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 1 function 1 not configured > sdhc0 at pci5 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2 int 18 > sdmmc0 at sdhc0 > "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 1 function 3 not configured > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 4 device 0 cacheline 0x10, lattimer 0x20 > pcmcia0 at cardslot0 > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD2500BEVS-2, 01.0> SCSI3 > 0/direct fixed naa.50014ee2ab9a23b8 > sd0: 238475MB, 512 bytes/sector, 488397168 sectors > cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, DVD+-RW TS-U633A, DW10> ATAPI > 5/cdrom removable > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 17 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM > spdmem1 at iic0 addr 0x52: 4GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > ugen0 at uhub4 port 1 "Broadcom Corp 5880" rev 1.10/1.01 addr 2 > uhub8 at uhub6 port 2 "Broadcom BCM2046B1" rev 2.00/1.00 addr 2 > uhidev0 at uhub8 port 1 configuration 1 interface 0 "Broadcom product > 0x4502" rev 2.00/1.00 addr 3 > uhidev0: iclass 3/1, 1 report id > ukbd0 at uhidev0 reportid 1: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub8 port 2 configuration 1 interface 0 "Broadcom product > 0x4503" rev 2.00/1.00 addr 4 > uhidev1: iclass 3/1, 125 report ids > ums0 at uhidev1 reportid 2: 3 buttons > wsmouse1 at ums0 mux 0 > uhid0 at uhidev1 reportid 125: input=2, output=0, feature=0 > ugen1 at uhub8 port 3 "Broadcom Corp BCM92046DG-CL1ROM" rev 2.00/8.18 addr 5 > ugen2 at uhub7 port 1 "AsureWave product 0x3314" rev 2.00/52.76 addr 2 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on sd0a swap on sd0b dump on sd0b
