I have Areca 1210 and 1220 RAID Controllers in a number of OpenBSD
servers.
The arc man page says "arc supports alarm control and monitoring of
volumes configured on the controllers via the bio(4) interface and the
bioctl(8) utility."
However, when I try to silence an alarm, I get the following:
# bioctl -a s arc0
bioctl: BIOCALARM: Operation not permitted
One thought I had was that the card's bios has a password that needs to
be entered for certain functions. Is this required here? If so, how?
Am I doing something else wrong?
--TimH
OpenBSD 4.9 (GENERIC.MP) #819: Wed Mar 2 06:57:49 MST 2011
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2145255424 (2045MB)
avail mem = 2074124288 (1978MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.51 @ 0x7feea000 (33 entries)
bios0: vendor Phoenix Technologies LTD version "6.00" date 08/27/2007
bios0: Supermicro PDSML
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP MCFG APIC BOOT SPCR SSDT
acpi0: wakeup devices DEV1(S5) EXP1(S5) EXP5(S5) EXP6(S5) PCIB(S5) KBC0(S1)
MSE0(S1) COM1(S5) COM2(S5) USB1(S4) USB2(S4) USB3(S4) USB4(S4) EUSB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-14
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz, 1995.25 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu0: 1MB 64b/line 4-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz, 1995.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu1: 1MB 64b/line 4-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (DEV1)
acpiprt2 at acpi0: bus 9 (EXP1)
acpiprt3 at acpi0: bus 13 (EXP5)
acpiprt4 at acpi0: bus 14 (EXP6)
acpiprt5 at acpi0: bus 15 (PCIB)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0xc0
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0: apic 2 int 16 (irq 7)
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci2 at ppb1 bus 2
arc0 at pci2 dev 14 function 0 "Areca ARC-1220" rev 0x00: apic 2 int 18 (irq 5)
arc0: 8 ports, 256MB SDRAM, firmware V1.49 2010-12-02
scsibus0 at arc0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <Areca, ARC-1220-VOL#00, R001> SCSI3 0/direct
fixed
sd0: 1430511MB, 512 bytes/sec, 2929686528 sec total
ppb2 at pci1 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17
(irq 11)
pci4 at ppb3 bus 9
ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 int 17 (irq
11)
pci5 at ppb4 bus 13
em0 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 2 int
16 (irq 7), address 00:30:48:9b:10:80
ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 int 16 (irq
7)
pci6 at ppb5 bus 14
em1 at pci6 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 2 int
17 (irq 11), address 00:30:48:9b:10:81
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
(irq 5)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
(irq 7)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci7 at ppb6 bus 15
vga1 at pci7 dev 0 function 0 "XGI Technology Volari Z7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19
(irq 11)
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627HF
wbng0 at iic0 addr 0x2f: w83793g
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm2 at wbsio0 port 0x290/8: W83627HF
lm1 detached
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Plus More Enterprise LTD.
USB-compliant keyboard" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Plus More Enterprise LTD.
USB-compliant keyboard" rev 1.10/1.00 addr 2
uhidev1: iclass 3/1, 3 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
ums0 at uhidev1 reportid 3: 0 button, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
