Ok, let me understand You have four ports on your soekris lan 1641, each port has an ip address in the 172.16.218.0/24 lan ? is that right for example:
sis0 172.16.218.100 sis1 172.16.218.101 sis2 172.16.218.102 and so on for sis3 is that right ? Each port with a path cord ? In my experience i never put all the ports or interfaces on the same network segment ... that always gives problems ... if you need all the ports on the same lan use trunk(8) Is what i can understand ... On Tue, Sep 6, 2011 at 9:27 AM, James Abercromby <jaberc...@gmail.com>wrote: > Has anyone else used this board with this mobo and experienced the same > issues as described below? > > http://www.itxdepot.com/xcart/product.php?productid=1910&cat=44019&page=1 > http://soekris.com/products/lan1641.html > > > I have tried both 4.9 and recent 5.0 snapshots but nothing earlier yet. > > OpenBSD sees the card and it's interfaces correctly as sis0-3, > they can successfully pull a dhcp lease or assign a static address. > > dhcp installs the correct default route or you can assign manually. > > When you go to ping. > > you get. > > send to: ping: Host is down.... > > I have made sure that pf is disabled and ip forwarding is turned off to see > if these were causing any issues but it has no issues with it. > > Tried this card with the same motherboard using Mint Linux and it was fine. > > Any help/insight would be appreciated. > > -- Cordialmente, 00110111 00111011
