installed latest current 201109101515, received same msgs with previous current version 201109072136 Install non-free firmware files on first boot? [no] yes verified that firmware files are installed in /etc/firmware
grep -i ath dmesg.boot athn0 at uhub0 port 1 "ATHEROS UB95" rev 2.00/2.02 addr 2 athn0: failed loadfirmware of file athn-ar7010-11 (error 2) athn0: could not load firmware athn0 at uhub0 port 1 "ATHEROS UB95" rev 2.00/2.02 addr 2 athn0: bad ROM checksum 0x2c17 athn0: could not read ROM athn0: could not attach chip reboot with TL-WN821N in computer when TL-WN821N disconnected # uvm_fault(0xffffffff80d2c0a0, 0x0, 0, 2) -> e kernel: page fault trap, code=0 Stopped at ieee80211_ifdetach+0x49: movq %rdx,0(%rax) ddb{0}> http://www.openbsd.org/report.html sysctl ddb.console=1 boot crash trace ieee80211_ifdetach() at ieee80211_ifdetach+0x49 athn_detach() at athn_detach+0x5a athn_usb_detach() at athn_usb_detach+0x11 config_detach() at config_detach+0x143 usb_disconnect_port() at usb_disconnect_port+0x6a uhub_expore()a at uhub_expore+0x12b usb_explore() at usb_explore+0xcf usb_task_thread() at usb_task_thread+0xb2 end trace frame: 0x0, count: -8 ps PID PPID PGRP UID S FLAGS WAIT COMMAND 22046 5938 22046 0 3 0x80 ttyin ksh 2594 1 2594 0 3 0x80 ttyin getty 24634 1 24634 0 3 0x80 ttyin getty 23530 1 23530 0 3 0x80 ttyin getty 1556 1 1556 0 3 0x80 ttyin getty 5938 1 5938 1000 3 0x88 pause ksh 19457 1 19457 0 3 0x80 select cron 17080 1 17080 0 3 0x80 select inetd 27633 1 27633 0 3 0x80 select sendmail 27154 1 27154 0 3 0x80 select sshd 32115 22870 22870 74 3 0x80 bpf pflogd 22870 1 22870 0 3 0x80 netio pflogd 24204 4537 4537 73 7 0x80 syslogd 4537 1 4537 0 3 0x80 netio syslogd 8741 1 8741 77 3 0x80 poll dhclient 20839 1 23652 0 3 0x80 poll dhclient 14 0 0 0 3 0x100200 aiodoned aiodoned 13 0 0 0 3 0x100200 syncer update 12 0 0 0 3 0x100200 cleaner cleaner 11 0 0 0 3 0x100200 reaper reaper 10 0 0 0 3 0x100200 pgdaemon pagedaemon 9 0 0 0 3 0x100200 bored pagedaemon On Sun, Sep 11, 2011 at 1:10 PM, Bill Allaire <open...@bogoflop.com> wrote: > TP-Link (TLWN812N 300Mbps) USB device. What I found really surprising was > that unplugging the device locked up the OS. > > Due to message: > Sep 7 15:19:08 geeky /bsd: athn0 at uhub0 > Sep 7 15:19:08 geeky /bsd: port 1 "ATHEROS UB95" rev 2.00/2.02 addr 3 > Sep 7 15:19:08 geeky /bsd: athn0: failed loadfirmware of file > athn-ar7010-11 (error 2) > Sep 7 15:19:08 geeky /bsd: athn0: could not load firmware > > I downloaded athn-firmware-1.1.tgz and extracted those files into > /etc/firmware. That file contained: > firmware/athn-ar7010 > firmware/athn-ar7010-11 > firmware/athn-ar9271 > > > That led to the following when plugged in: > > Sep 11 10:30:05 geeky /bsd: port 1 "ATHEROS UB95" rev 2.00/2.02 addr 3 > Sep 11 10:30:07 geeky /bsd: athn0: bad ROM checksum 0x2c17 > Sep 11 10:30:07 geeky /bsd: athn0: could not read ROM > Sep 11 10:30:07 geeky /bsd: athn0: could not attach chip > > > When unplugged: > > uvm_fault(0xd0a31aa0, 0x0, 0, 3) -> e > kernel: page fault trap, code=0 > Stopped at ieee80211_ifdetach+0x3e: movl %edx,0(%eax) > ddb{1}> (lost keyboard response at this point) > > I did try setting "sysctl ddb.console=1" before unplugging the device again > but: > sysctl: ddb.console: Operation not permitted > > I'm not sure how else I can get a trace, ps, show registers, etc... > > > > dmesg (from a fit-PC2i): > OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011 > > dera...@i386.openbsd.org:/usr/**src/sys/arch/i386/compile/GENE**RIC.MP<http://GENERIC.MP> > cpu0: Intel(R) Atom(TM) CPU Z530 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 > GHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,**MCE,CX8,APIC,SEP,MTRR,PGE,MCA,** > CMOV,PAT,CFLUSH,DS,ACPI,MMX,**FXSR,SSE,SSE2,SS,HTT,TM,SBF,** > SSE3,MWAIT,DS-CPL,VMX,EST,TM2,**SSSE3,xTPR,PDCM,MOVBE > real mem = 1063354368 (1014MB) > avail mem = 1035804672 (987MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 09/14/10, BIOS32 rev. 0 @ 0xfdc70, > SMBIOS rev. 2.5 @ 0x3f69f000 (33 entries) > bios0: vendor Phoenix Technologies LTD version > "NAPA0001.86C.0000.D.**1009141059" > date 09/14/2010 > bios0: CompuLab CM-iAM/SBC-FITPC2i > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET MCFG TCPA TMOR APIC BOOT SSDT > acpi0: wakeup devices PXS1(S3) PXS2(S3) USB1(S3) USB2(S3) USB3(S3) EHC1(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 132MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Atom(TM) CPU Z530 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 > GHz > cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,**MCE,CX8,APIC,SEP,MTRR,PGE,MCA,** > CMOV,PAT,CFLUSH,DS,ACPI,MMX,**FXSR,SSE,SSE2,SS,HTT,TM,SBF,** > SSE3,MWAIT,DS-CPL,VMX,EST,TM2,**SSSE3,xTPR,PDCM,MOVBE > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (RP01) > acpiprt2 at acpi0: bus 3 (RP02) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C3, C2, C1 > acpicpu1 at acpi0: C3, C3, C2, C1 > acpitz0 at acpi0acpitz0: TZ00: failed to read _TMP > acpitz1 at acpi0acpitz1: TZ01: failed to read _TMP > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT0 not present > acpibat1 at acpi0: BAT1 not present > acpibat2 at acpi0: BAT2 not present > acpibtn0 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD01 > acpivout1 at acpivideo0: DD02 > acpivout2 at acpivideo0: DD03 > acpivout3 at acpivideo0: DD04 > bios0: ROM list: 0xc0000/0xe600! 0xce800/0x1000 0xcf800/0x1000 > 0xe0000/0x1800! > cpu0: Enhanced SpeedStep disabled by BIOS > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel US15W Host" rev 0x07 > vga1 at pci0 dev 2 function 0 "Intel US15W Video" rev 0x07 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp at vga1 not configured > ppb0 at pci0 dev 28 function 0 "Intel SCH PCIE" rev 0x07: apic 2 int 17 > (irq 4) > pci1 at ppb0 bus 2 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C > (0x3c00), apic 2 int 16 (irq 7), address 00:01:c0:08:84:aa > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ppb1 at pci0 dev 28 function 1 "Intel SCH PCIE" rev 0x07: apic 2 int 16 > (irq 7) > pci2 at ppb1 bus 3 > re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C > (0x3c00), apic 2 int 17 (irq 4), address 00:01:c0:08:84:ab > rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2 > uhci0 at pci0 dev 29 function 0 "Intel SCH USB" rev 0x07: apic 2 int 23 > (irq 10) > uhci1 at pci0 dev 29 function 1 "Intel SCH USB" rev 0x07: apic 2 int 19 > (irq 5) > uhci2 at pci0 dev 29 function 2 "Intel SCH USB" rev 0x07: apic 2 int 18 > (irq 3) > ehci0 at pci0 dev 29 function 7 "Intel SCH USB" rev 0x07: apic 2 int 21 > (irq 11) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > sdhc0 at pci0 dev 30 function 0 "Intel SCH SD/MMC" rev 0x07: apic 2 int 22 > (irq 12) > sdmmc0 at sdhc0 > sdhc1 at pci0 dev 30 function 1 "Intel SCH SD/MMC" rev 0x07: apic 2 int 20 > (irq 10) > sdmmc1 at sdhc1 > sdhc2 at pci0 dev 30 function 2 "Intel SCH SD/MMC" rev 0x07: apic 2 int 18 > (irq 3) > sdmmc2 at sdhc2 > pcib0 at pci0 dev 31 function 0 "Intel SCH LPC" rev 0x07 > pciide0 at pci0 dev 31 function 1 "Intel SCH IDE" rev 0x07: DMA, channel 0 > wired to compatibility > wd0 at pciide0 channel 0 drive 0: <Hitachi HTS545016B9A300> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: probed fifo depth: 15 bytes > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > scsibus0 at sdmmc1: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed > sd0: 1938MB, 512 bytes/sec, 3970048 sec total > athn0 at uhub0 port 1 "ATHEROS UB95" rev 2.00/2.02 addr 2 > run0 at uhub0 port 7 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 3 > run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address > 00:0d:f0:8d:e9:2a > uhidev0 at uhub1 port 2 configuration 1 interface 0 "LiteOn HP USB > Multimedia Keyboard" rev 1.10/1.22 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub1 port 2 configuration 1 interface 1 "LiteOn HP USB > Multimedia Keyboard" rev 1.10/1.22 addr 2 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0 > uhid2 at uhidev1 reportid 3: input=3, output=0, feature=4 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > athn0: bad ROM checksum 0x2c17 > athn0: could not read ROM > athn0: could not attach chip > > > Regards, > Bill