<snip>
> Cool, what can I do?
> Test! We need wide testing on systems that have IPMI. I bet
> there has to be
> some tuning to work around timing differences between
> platforms. The current
> code was tested on Intel, Dell and Sun boards.
Works here on a Dell SC1425, i386:
(will try amd64 later)
$ sysctl hw.sensors
hw.sensors.0=ipmi0, Temp, OK, temp, 36.00 degC / 96.80 degF
hw.sensors.1=ipmi0, Temp, OK, temp, 50.00 degC / 122.00 degF
hw.sensors.2=ipmi0, Planar Temp, OK, temp, 31.00 degC / 87.80 degF
hw.sensors.3=ipmi0, VRD 0 Temp, OK, temp, 27.00 degC / 80.60 degF
hw.sensors.4=ipmi0, VRD 1 Temp, OK, temp, 26.00 degC / 78.80 degF
hw.sensors.5=ipmi0, CMOS Battery, OK, volts_dc, 3.10 V
hw.sensors.6=ipmi0, Fan 1, OK, fanrpm, 3300 RPM
hw.sensors.7=ipmi0, Fan 2A, OK, fanrpm, 7500 RPM
hw.sensors.8=ipmi0, Fan 2B, OK, fanrpm, 5400 RPM
hw.sensors.9=ipmi0, Fan 3A, OK, fanrpm, 7350 RPM
hw.sensors.10=ipmi0, Fan 3B, OK, fanrpm, 5325 RPM
hw.sensors.11=ipmi0, Fan 4A, OK, fanrpm, 7125 RPM
hw.sensors.12=ipmi0, Fan 4B, OK, fanrpm, 5250 RPM
hw.sensors.13=ipmi0, Fan 5A, OK, fanrpm, 7500 RPM
hw.sensors.14=ipmi0, Fan 5B, OK, fanrpm, 5175 RPM
hw.sensors.15=ipmi0, Intrusion, OK, indicator, Off
dmesg:
OpenBSD 3.8-current (GENERIC) #7: Mon Oct 24 13:27:32 CEST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 536195072 (523628K)
avail mem = 482385920 (471080K)
using 4278 buffers containing 26910720 bytes (26280K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/18/05, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbf50/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1800 0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
em0 at pci2 dev 4 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 11,
address 00:14:22:72:27:22
vendor "Intel", unknown product 0x0326 (class system subclass interrupt, rev
0x09) at pci1 dev 0 function 1 not configured
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
em1 at pci3 dev 7 function 0 "Intel PRO/1000MT (82546EB)" rev 0x01: irq 5,
address 00:02:a5:48:f0:70
em2 at pci3 dev 7 function 1 "Intel PRO/1000MT (82546EB)" rev 0x01: irq 10,
address 00:02:a5:48:f0:71
vendor "Intel", unknown product 0x0327 (class system subclass interrupt, rev
0x09) at pci1 dev 0 function 3 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB" rev 0x02: irq 6
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci4 at ppb3 bus 4
em3 at pci4 dev 3 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 3,
address 00:14:22:72:27:23
vga1 at pci4 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8082N, 0106> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD400BD-75LRA0>
wd0: 16-sector PIO, LBA48, 38146MB, 78125000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask efe5 netmask efed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
