> Hi list,
Sorry for the noise -- Cisco config was wrong.
Thanks,
Donald
> I have some trouble integrating ospfd into our Cisco network.
>
> Using a pretty vanilla ospfd.conf (due to ip.forwarding set to "0" during
> test period, this machine automatically is announced as a stub router -- I
> like the way developers think ahead! :) I can use 'auth-type none' as well as
> 'auth-type simple', but using this:
>
> # areas
>
> area 0.0.0.0 {
> interface vlan123 {
> auth-type crypt
> auth-md 1 "secret"
> auth-md-keyid 1
> }
> }
>
> doesn't work:
>
> spf_calc: area 0.0.0.0 calculated
> auth_validate: wrong auth type, interface vlan123
> recv_packet: authentication error, interface vlan123
> auth_validate: wrong auth type, interface vlan123
> recv_packet: authentication error, interface vlan123
>
> Also tried key-id 0 (special case following the man page), also no success.
> Ciscos are configured to use md5-based auth.
>
> Any idea what might be wrong?
>
> TIA,
>
> Donald
--
NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurC<ck-Garantie!
Jetzt informieren: http://www.gmx.net/de/go/freephone
