Everything works. The RAID card is an HP P410 and the additional network
card, em2, is an HP NC112T.
Still there is these ones that are not configured:
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
And an error on boot:
RTC BIOS diagnostic error 8<fixed_disk>
OpenBSD 4.9 (GENERIC.MP) #819: Wed Mar 2 06:57:49 MST 2011
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 8<fixed_disk>
real mem = 3211132928 (3062MB)
avail mem = 3111632896 (2967MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x9ec00 (71 entries)
bios0: vendor HP version "O20" date 01/24/2011
bios0: HP ProLiant DL180 G6
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR MCFG SPMI SLIC BOOT OEMB HPET DMAR SSDT EINJ
BERT ERST HEST
acpi0: wakeup devices NPE1(S4) NPE2(S4) NPE3(S4) NPE4(S4) NPE5(S4) NPE6(S4)
NPE7(S4) NPE8(S4) NPE9(S4) NPEA(S4) P0P1(S4) USB0(S4) USB1(S4) USB2(S4)
USB5(S4) EUSB(S4) USB3(S4) USB4(S4) USB6(S4) USBE(S4) GBE_(S4) P0P4(S4)
P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 32 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz, 2133.73 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 34 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz, 2133.41 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 50 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz, 2133.41 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 52 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz, 2133.41 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
ioapic1 at mainbus0: apid 3 pa 0xfec8a000, version 20, 24 pins
ioapic1: misconfigured as apic 4, remapped to apid 3
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (NPE1)
acpiprt2 at acpi0: bus -1 (NPE2)
acpiprt3 at acpi0: bus 6 (NPE3)
acpiprt4 at acpi0: bus -1 (NPE4)
acpiprt5 at acpi0: bus -1 (NPE5)
acpiprt6 at acpi0: bus -1 (NPE6)
acpiprt7 at acpi0: bus 5 (NPE7)
acpiprt8 at acpi0: bus -1 (NPE8)
acpiprt9 at acpi0: bus 4 (NPE9)
acpiprt10 at acpi0: bus 3 (P0P4)
acpiprt11 at acpi0: bus 2 (P0P8)
acpicpu0 at acpi0: C3, C3, C1, PSS
acpicpu1 at acpi0: C3, C3, C1, PSS
acpicpu2 at acpi0: C3, C3, C1, PSS
acpicpu3 at acpi0: C3, C3, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2133 MHz: speeds: 2133, 2000, 1867, 1733, 1600, 1467,
1333, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0 bus 7
em0 at pci1 dev 0 function 0 "Intel PRO/1000 (82576)" rev 0x01: apic 3 int 4
(irq 10), address 9c:8e:99:xx:xx:xx
em1 at pci1 dev 0 function 1 "Intel PRO/1000 (82576)" rev 0x01: apic 3 int 16
(irq 5), address 9c:8e:99:xx:xx:xx
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus 6
ciss0 at pci2 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01: apic 3
int 0 (irq 10)
ciss0: 1 LD, HW rev 2, FW 3.66/3.66, 64bit fifo rro
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 3.66> SCSI3 0/direct fixed
sd0: 953816MB, 512 bytes/sec, 1953415216 sec total
ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13
pci3 at ppb2 bus 5
ppb3 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13
pci4 at ppb3 bus 4
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 1 int 16
(irq 10)
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 1 int 18
(irq 15)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 1 int 16
(irq 10)
pci5 at ppb4 bus 3
em2 at pci5 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: apic 1 int
16 (irq 10), address 00:22:64:xx:xx:xx
ppb5 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: apic 1 int 16
(irq 10)
pci6 at ppb5 bus 2
vga1 at pci6 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci1 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 1 int 23
(irq 14)
uhci2 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 1 int 19
(irq 11)
uhci3 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 1 int 18
(irq 15)
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 1 int 23
(irq 14)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci7 at ppb6 bus 1
pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: apic 1 int 19
(irq 11), AHCI 1.2
scsibus1 at ahci0: 32 targets
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhidev0 at uhub4 port 2 configuration 1 interface 0 "CHESEN PS2 to USB
Converter" rev 1.10/0.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 1 "CHESEN PS2 to USB
Converter" rev 1.10/0.10 addr 2
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
