When I attempt to mount a cd or read the disklabel, I get this error
from the kernel:
Oct 26 10:08:59 develop /bsd: cd0(pciide0:0:0): timeout
Oct 26 10:08:59 develop /bsd: cd0(pciide0:0:0): timeout
Oct 26 10:08:59 develop /bsd: type: atapi
Oct 26 10:08:59 develop /bsd: type: atapi
Oct 26 10:08:59 develop /bsd: c_bcount: 0
Oct 26 10:08:59 develop /bsd: c_bcount: 0
Oct 26 10:08:59 develop /bsd: c_skip: 0
Oct 26 10:08:59 develop /bsd: c_skip: 0
Oct 26 10:09:09 develop /bsd: cd0(pciide0:0:0): timeout
Oct 26 10:09:09 develop /bsd: cd0(pciide0:0:0): timeout
Oct 26 10:09:09 develop /bsd: type: atapi
Oct 26 10:09:09 develop /bsd: type: atapi
Oct 26 10:09:09 develop /bsd: c_bcount: 32
Oct 26 10:09:09 develop /bsd: c_bcount: 32
Oct 26 10:09:10 develop /bsd: c_skip: 0
Oct 26 10:09:10 develop /bsd: c_skip: 0
Oct 26 10:09:10 develop /bsd: pciide0:0:0: device timeout, c_bcount=32,
c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x2
Oct 26 10:09:10 develop /bsd: pciide0:0:0: device timeout, c_bcount=32,
c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x2
Oct 26 10:09:15 develop /bsd: cd0(pciide0:0:0): timeout
Oct 26 10:09:15 develop /bsd: cd0(pciide0:0:0): timeout
Oct 26 10:09:15 develop /bsd: type: atapi
Oct 26 10:09:15 develop /bsd: type: atapi
Oct 26 10:09:15 develop /bsd: c_bcount: 0
Oct 26 10:09:15 develop /bsd: c_bcount: 0
Oct 26 10:09:15 develop /bsd: c_skip: 0
Oct 26 10:09:15 develop /bsd: c_skip: 0
Oct 26 10:09:19 develop /bsd: cd0(pciide0:0:0): timeout
Oct 26 10:09:19 develop /bsd: cd0(pciide0:0:0): timeout
Oct 26 10:09:19 develop /bsd: type: atapi
Oct 26 10:09:19 develop /bsd: type: atapi
Oct 26 10:09:19 develop /bsd: c_bcount: 0
Oct 26 10:09:19 develop /bsd: c_bcount: 0
Oct 26 10:09:19 develop /bsd: c_skip: 0
Oct 26 10:09:19 develop /bsd: c_skip: 0
This message repeats for about 10 minutes, at which point the kernel
gives up and I get a prompt.
This happens whenever I try to mount cd0[a,c] or 'disklabel cd0'.
I can't find anything relevant in the forums - the closest I got was a
message about problems with hardware using the le device.
The machine is an IBM xSeries 336 with a Xeon processor. I'm using the
generic amd64 kernel. I can boot from cd.
Anyone have any idea what the problem could be?
dmesg output: (not including error messages as above)
OpenBSD 3.7-stable (GENERIC) #1: Thu Oct 20 15:48:27 NZDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1073123328 (1047972K)
avail mem = 909221888 (887912K)
using 22937 buffers containing 107520000 bytes (105000K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz, 3000.60 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,LONG
cpu0: 2MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c
"Intel E7710 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
mpt0 at pci3 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08: irq 11
mpt0: sending FW Upload request to IOC (size: 36, img size: 69956)
mpt0: IM support: 4
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <LSILOGIC, 1030 IM, 1000> SCSI2 0/direct fixed
sd0: 70006MB, 70006 cyl, 16 head, 128 sec, 512 bytes/sec, 143372288 sec
total
mpt0: target 0 Asynchronous at 0MHz width 8bit offset 0 QAS 0 DT 0 IU 0
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 5
ppb4 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown
BCM5750 (0x4101): irq 11 address 00:14:5e:30:3e:fc
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown
BCM5750 (0x4101): irq 11 address 00:14:5e:30:3e:fd
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
vendor "Intel", unknown product 0x359b (class system subclass
miscellaneous, rev 0x0c) at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB" rev 0x02: irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82801EB/ER LPC" rev 0x02 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8083N, 0L02> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
arp: attempt to overwrite entry for 0.0.0.0 on lo0 by 00:14:5e:30:56:04
on bge0
