I got a problem with snapshot (not shure if it's the last),
download is really slow, 0.3 to 1 Mbps per customent.
Also a lot of paquet lost beginning from the openbsd.
The're around 800 to 1000 users on this server.
Bandwith is not a problem but we often saw limitation in number
of paquets be the problem on our old servers. When it's happen
with linux, it often a ct sysctl value. I saw this too with PF on
FreeBSD that I add to give higher value in set limit.

I use the same limit value than on my FreeBSD server that have 3 x more
traffic and users.
set limit { states 196608, src-nodes 16384, frags 8192, tables 1024,
table-entries 131072 }
so I really don't think those value are too low

# pfctl -si
Status: Enabled for 0 days 05:18:11              Debug: err

State Table                          Total             Rate
  current entries                    24986
  searches                       112481055         5891.8/s
  inserts                          3846438          201.5/s
  removals                         3821452          200.2/s
Counters
  match                            5534959          289.9/s
  bad-offset                             0            0.0/s
  fragment                              26            0.0/s
  short                               1284            0.1/s
  normalize                            602            0.0/s
  memory                              4228            0.2/s
  bad-timestamp                          0            0.0/s
  congestion                             0            0.0/s
  ip-option                              1            0.0/s
  proto-cksum                            0            0.0/s
  state-mismatch                     20446            1.1/s
  state-insert                          24            0.0/s
  state-limit                            0            0.0/s
  src-limit                              0            0.0/s
  synproxy                               0            0.0/s

no queue and I don't see any error in dmesg or in the log. CPU load is
between 4 to 8% load checking with systat, 1920704 active memory free.
Interrupts total from 6 to 7k.

Is there a sysctl that could block too much connexion ? I looked at the inet
list 1 by 1 but didn't find anything for now. Any other idea ?

Michel

DMESG :

arpresolve: 10.8.1.4: route without link local address (This one come often
and also see somethime 10.8.1.26)
syncing disks... done
r
OpenBSD 5.0-current (GENERIC.MP) #70: Mon Sep 12 02:07:20 MDT 2011
    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2135490560 (2036MB)
avail mem = 2064576512 (1968MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9f800 (22 entries)
bios0: vendor American Megatrends Inc. version "080016" date 03/04/2011
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P1(S4) PS2K(S4) PS2M(S4) USB0(S4) USB1(S4) USB2(S4)
USB3(S4) EUSB(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4)
SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N550 @ 1.50GHz, 1500.18 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) CPU N550 @ 1.50GHz, 1499.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu1: 512KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Atom(TM) CPU N550 @ 1.50GHz, 1499.99 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu2: 512KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU N550 @ 1.50GHz, 1499.99 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu3: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 4
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus 2 (P0P5)
acpiprt4 at acpi0: bus 3 (P0P6)
acpiprt5 at acpi0: bus 4 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
cpu0: Enhanced SpeedStep 1499 MHz: speeds: 1500, 1000 MHz
pci0 at mainbus0 bus 0
mem address conflict 0xfc00/0x400
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16
drm0 at inteldrm0
"Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: VIA/0x4397
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E
(0x2c00), apic 4 int 17, address 00:30:18:a0:fd:eb
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E
(0x2c00), apic 4 int 18, address 00:30:18:a0:fd:ec
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: msi
pci4 at ppb3 bus 4
jmb0 at pci4 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x10
ahci0 at jmb0: apic 4 int 19, AHCI 1.1
scsibus0 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 4 int 19 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
em0 at pci5 dev 4 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 4
int 18, address 00:30:18:a0:f5:a1
em1 at pci5 dev 6 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 4
int 19, address 00:30:18:a0:f5:a2
em2 at pci5 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 4
int 16, address 00:30:18:a0:f5:a3
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <INTEL SSDSA2CT040G3>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int
19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 15 bytes
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 15 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (c0b9648c56b1a52b.a) swap on wd0b dump on wd0b

Reply via email to