Thanks all! The problem is solved by recustomizing IRQ in BIOS.
# dmesg | grep bge1
bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): irq 7 address 00:0e:7f:ad:0e:e3
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0e:7f:ad:0e:e3
media: Ethernet autoselect (100baseTX full-duplex)
status: active
----- Original Message -----
From: "Bill Marquette" <[EMAIL PROTECTED]>
To: "lEBEDEW aNDREJ gERMANOWI^" <[EMAIL PROTECTED]>
Cc: <misc@openbsd.org>
Sent: Wednesday, October 26, 2005 5:51 PM
Subject: Re: HP DL 380 G3 + OpenBSD 3.8
On 10/26/05, lEBEDEW aNDREJ gERMANOWI^ <[EMAIL PROTECTED]> wrote:
My problem (!!!) - bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev
0x02:
couldn't establish interrupt at irq 15.
Howto ? RTFM ? Help me!
In the Compaq BIOS, make sure nothing is configured for IRQ 15. It's
an annoying issue I've seen with the DL380's - none of my boxes can
have _anything_ configured for IRQ15. The G4's make the choice
easier, they only allow 5 and 7 if I recall ;)
--Bill
