Ok, thanks. Has to be a BIOS thing then, because 4.8 dont recognize any NICs at all, internal or USB. I kind of expected the WLAN to be unusable, as it was on the 700. Any ideas as to what BIOS settings to fiddle with?
On Mon, 28 Nov 2011 08:47:42 +0100, Christian StC<rmer <[email protected]> wrote: > On Fri, Nov 25, 2011 at 11:50 AM, Henrik Engmark <[email protected]> wrote: >> I was wondering if anyone out there is using the eee pc 900 to run >> OpenBSD. > >> If anyone is using a successful combination of eee pc 900 and OpenBSD, >> please >> let me know. > > I use OpenBSD on my Eee PC 900, but I've had stability problems using > 4.9 with the internal SSD and the Atheros AR5424 was unusable. I don't > know if that changed with 5.0. > lii and axe work fine. > > --- > OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) > 901 MHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF > real mem = 2138107904 (2039MB) > avail mem = 2093076480 (1996MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 03/03/09, BIOS32 rev. 0 @ > 0xf0010, SMBIOS rev. 2.5 @ 0xf06f0 (37 entries) > bios0: vendor American Megatrends Inc. version "1006" date 03/03/2009 > bios0: ASUSTeK Computer INC. 900 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC OEMB MCFG > acpi0: wakeup devices P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) > MC97(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 100MHz > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 5 (P0P3) > acpiprt2 at acpi0: bus 3 (P0P5) > acpiprt3 at acpi0: bus 1 (P0P6) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2 > acpitz0 at acpi0: critical temperature is 90 degC > acpibat0 at acpi0: BAT0 model "900" serial type LION oem "ASUS" > acpiac0 at acpi0: AC unit online > acpiasus0 at acpi0 > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibtn2 at acpi0: PWRB > acpivideo0 at acpi0: VGA_ > bios0: ROM list: 0xc0000/0xf800! > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04 > vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1: apic 1 int 16 > drm0 at inteldrm0 > "Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16 > pci1 at ppb0 bus 4 > ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17 > pci2 at ppb1 bus 3 > lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic > 1 int 17, address 00:22:15:0f:f8:a6 > atphy0 at lii0 phy 1: F2 10/100 PHY, rev. 2 > ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int 18 > pci3 at ppb2 bus 1 > ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 18 > ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:b5:93:a1 > uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23 > uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19 > uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16 > ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4 > pci4 at ppb3 bus 5 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM > disabled > pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 1 drive 0: <ASUS-PHISON OB SSD> > wd0: 1-sector PIO, LBA, 3847MB, 7880544 sectors > wd1 at pciide0 channel 1 drive 1: <Patriot Memory 32GB PATA Storage Drive> > wd1: 1-sector PIO, LBA, 30783MB, 63045360 sectors > wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 > wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4 > ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1 > int 19 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > umass0 at uhub0 port 2 configuration 1 interface 0 "General USB Flash > Disk" rev 2.00/11.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus0 at umass0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <General, USB Flash Disk, 1100> SCSI2 > 0/direct removable serial.090c1000000000001257 > sd0: 15378MB, 512 bytes/sector, 31494144 sectors > uhub5 at uhub0 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/77.64 addr 3 > uhub6 at uhub5 port 3 "Genesys Logic USB2.0 Hub" rev 2.00/77.64 addr 4 > umass1 at uhub6 port 3 configuration 1 interface 0 "SanDisk U3 Cruzer > Micro" rev 2.00/2.00 addr 5 > umass1: using SCSI over Bulk-Only > scsibus1 at umass1: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <SanDisk, Cruzer, 8.02> SCSI0 0/direct > removable serial.0781540602057ED35B7F > sd1: 7691MB, 512 bytes/sector, 15753215 sectors > umass2 at uhub6 port 4 configuration 1 interface 0 "Nokia N900 > (Storage Mode)" rev 2.00/3.16 addr 6 > umass2: using SCSI over Bulk-Only > scsibus2 at umass2: 2 targets, initiator 0 > sd2 at scsibus2 targ 1 lun 0: <Nokia, N900, 031> SCSI2 0/direct removable > sd3 at scsibus2 targ 1 lun 1: <Nokia, N900, 031> SCSI2 0/direct removable > uhub7 at uhub5 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/77.64 addr 7 > umass3 at uhub7 port 1 configuration 1 interface 0 "Western Digital > External HDD" rev 2.00/1.75 addr 8 > umass3: using SCSI over Bulk-Only > scsibus3 at umass3: 2 targets, initiator 0 > sd4 at scsibus3 targ 1 lun 0: <WD, 10EAVS External, 1.75> SCSI2 > 0/direct fixed serial.10581003303835303037 > sd4: 953869MB, 512 bytes/sector, 1953525168 sectors > axe0 at uhub7 port 2 configuration 1 interface 0 "D-Link DUB-E100 rev > B1" rev 2.00/0.01 addr 9 > axe0: AX88772, address 00:80:c8:3b:30:38 > rlphy0 at axe0 phy 3: IP101 10/100 PHY, rev. 4 > umass4 at uhub7 port 4 configuration 1 interface 0 "JMicron Samsung S2 > Portable" rev 2.00/0.00 addr 10 > umass4: using SCSI over Bulk-Only > scsibus4 at umass4: 2 targets, initiator 0 > sd5 at scsibus4 targ 1 lun 0: <Samsung, S2 Portable, > SCSI2 0/direct > fixed serial.04e81f0aE09310500042 > sd5: 953869MB, 512 bytes/sector, 1953525168 sectors > umass5 at uhub0 port 5 configuration 1 interface 0 "ENE UB6225" rev > 2.00/1.00 addr 11 > umass5: using SCSI over Bulk-Only > scsibus5 at umass5: 2 targets, initiator 0 > sd6 at scsibus5 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 > 0/direct removable serial.09511606146030377350 > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony > Electronics Co., Ltd. CNF7129" rev 2.00/15.12 addr 12 > video0 at uvideo0 > vscsi0 at root > scsibus6 at vscsi0: 256 targets > softraid0 at root > scsibus7 at softraid0: 256 targets > root on sd0a (f9cac2d9f61e921b.a) swap on sd0b dump on sd0b > --- -- Henrik Engmark Systems Engineer TechTrade International AB Office: 08-754 09 90 P.O. Box 6044 SE-192 06 Sollentuna, Sweden
