Hi,
this is the dmesg:
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 745 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 536449024 (523876K)
avail mem = 482430976 (471124K)
using 4278 buffers containing 26927104 bytes (26296K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/17/00, BIOS32 rev. 0 @ 0xfd6b1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 10 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x9a00 0xc9a00/0xd800 0xd7200/0x4800
mainbus0: Intel MP Specification (Version 1.1) (IBM ENSW Kiowa SMP )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 99 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class)
cpu1: FPU,CX8,APIC
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type ISA
ioapic0 at mainbus0: apid 14 pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82440BX AGP" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel 82440BX AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Chips and Technologies 69000" rev 0x64
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (disabled)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8241B, 1.24> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"Intel 82371AB USB" rev 0x01 at pci0 dev 7 function 2 not configured
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
admtemp0 at iic0 addr 0x18: max1617
admtemp1 at iic0 addr 0x1a: max1617
"unknown" at iic0 addr 0x2d not configured
admtemp2 at iic0 addr 0x4c: max1617
admtemp3 at iic0 addr 0x4e: max1617
fxp0 at pci0 dev 17 function 0 "Intel 8255x" rev 0x08, i82559: apic 14 int
18 (irq 10), address xx:xx:xx:xx:xx:xx
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci0 dev 18 function 0 "Intel 8255x" rev 0x08, i82559: apic 14 int
17 (irq 11), address xx:xx:xx:xx:xx:xx
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
ppb1 at pci0 dev 20 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
rl0 at pci2 dev 14 function 0 "D-Link Systems 530TX+" rev 0x10: apic 14 int
17 (irq 11), address xx:xx:xx:xx:xx:xx
rlphy0 at rl0 phy 0: RTL internal PHY
ahc0 at pci2 dev 15 function 0 "Adaptec AHA-2940U" rev 0x01: apic 14 int 16
(irq 9)
scsibus1 at ahc0: 16 targets
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
sd0 at scsibus1 targ 0 lun 0: <IBM-PSG, ST39175LW !#, 0350> SCSI2 0/direct
fixed
sd0: 8678MB, 11721 cyl, 5 head, 303 sec, 512 bytes/sec, 17774160 sec total
ahc0: target 1 using 8bit transfers
ahc0: target 1 using asynchronous transfers
sd1 at scsibus1 targ 1 lun 0: <IBM-PSG, ST39175LW !#, 0350> SCSI2 0/direct
fixed
sd1: 8678MB, 11721 cyl, 5 head, 303 sec, 512 bytes/sec, 17774160 sec total
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
dkcsum: sd0 matches BIOS drive 0x80
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 10.0MHz, offset = 0x8
dkcsum: sd1 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
Thanks!
Alessandro
On Mon, Nov 28, 2011 at 7:53 PM, Stuart Henderson <s...@spacehopper.org>wrote:
> dmesg?
>
> On 2011-11-28, rik <rikc...@gmail.com> wrote:
> > Good day,
> > I'm using 2 openbsd boxes as router firewall with carp in a colo-like
> setup.
> > In the last few days we saw the packet loss percentuale increase up to
> > 8-10% and it doesn't look like a problem for outside. If I ping from the
> > master firewall one of the server inside I can see something like this:
> >
> > 64 bytes from xx.xx.xx.12: icmp_seq=4 ttl=64 time=-3.-656 ms
> > 64 bytes from xx.xx.xx.12: icmp_seq=5 ttl=64 time=0.794 ms
> > 64 bytes from xx.xx.xx.12: icmp_seq=6 ttl=64 time=0.-491 ms
> > ping: sendto: No route to host
> > ping: wrote xx.xx.xx.12 64 chars, ret=-1
> > ping: sendto: No route to host
> > ping: wrote xx.xx.xx.12 64 chars, ret=-1
> > 64 bytes from xx.xx.xx.12: icmp_seq=9 ttl=64 time=0.526 ms
> > 64 bytes from xx.xx.xx.12: icmp_seq=10 ttl=64 time=1.415 ms
> >
> > No errors in syslog.
> > Any idea?
> > Thanks
> > Alessandro
