Harford, Colin wrote:
brad@ had committed a fix that worked for me, that allowed the dual
port's to show up. (mine were PCI-Express). The fix should be in 3.8
em0 at pci5 dev 4 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
10, address: 00:0e:0c:71:83:2c
em1 at pci5 dev 4 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq
7, address: 00:0e:0c:71:83:2d
Good to hear that it worked for you.
Unfortunately it still does not work for me (October 27 snapshot).
em0 at pci5 dev 2 function 0 "Intel PRO/1000MT (82546GB)" rev 0x01: irq
3em0: The EEPROM Checksum Is Not Valid
em0: Unable to initialize the hardware
em1 at pci5 dev 2 function 1 "Intel PRO/1000MT (82546GB)" rev 0x01: irq
9em1: The EEPROM Checksum Is Not Valid
em1: Unable to initialize the hardware
Full dmesg below.
Any further hints from anyone would be most appreciated.
Thanks,
Lawrence
OpenBSD 3.8-current (GENERIC) #219: Thu Oct 27 10:43:43 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 534925312 (522388K)
avail mem = 481222656 (469944K)
using 4278 buffers containing 26849280 bytes (26220K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 05/24/05, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfed10/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xc000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82955X MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel 82955X PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia Quadro NVS 285" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82801GB HD Audio" rev 0x01 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
(0x4001): irq 10, address [CENSORED]
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci5 at ppb4 bus 5
em0 at pci5 dev 2 function 0 "Intel PRO/1000MT (82546GB)" rev 0x01: irq
3em0: The EEPROM Checksum Is Not Valid
em0: Unable to initialize the hardware
em1 at pci5 dev 2 function 1 "Intel PRO/1000MT (82546GB)" rev 0x01: irq
9em1: The EEPROM Checksum Is Not Valid
em1: Unable to initialize the hardware
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SC-148A, B403> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD400BD-75LRA0>
wd0: 16-sector PIO, LBA48, 38146MB, 78125000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801GB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask eb6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
