I've had some problems installing 5.0 on a couple of older machines. For at least two of them upgrading the BIOS did the trick. The latest BIOS for your ProLiant appears to be 4.1.0:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=316592&prodTypeId=15351&prodSeriesId=316590&swLang=8&taskId=135&swEnvOID=1112 On Sat, Dec 17, 2011 at 10:52:45PM -0500, Understudy wrote: > Hi, > > The bios do not allow for the change on the USB settings. I have > tried two different smart start cds, neither comes up fully. > > Sincerely, > Brendhan > > On 12/17/11 21:36, Erling Westenvik wrote: > >If applicable, try switching USB to/from "Legacy" mode in BIOS. > > > >On Sat, Dec 17, 2011 at 04:54:14PM -0500, Understudy wrote: > >>Hi, > >> > >>I am trying to install Openbsd 5.0 on a compaq proliant dl360 G2. I > >>have tried to do the install with a install cd, a cd50, cdemu, and > >>snapshot cd50 iso cds. All of them stop at the same point. > >>When the dmesg reaches the line uhub0 at usb0 "ServerWorks OHCI > >>root hub" rev 1.00/1.00 addr 1 it hangs and goes no further. > >> > >>I tried doing boot -c and tried the disable apm but that had no effect. > >> > >>I am at a bit of a loss as to what I can do, so I am up for other ideas. > >> > >>Sincerely, > >>Brendhan > -- Cheers, Erling
