On 2011/12/19 16:10, Wesley M. wrote:
> So i
> tried to use 5.0 RELEASE.
> This time, it formats quickly. But it is the same
> way : kernel panic when it starts the network.
>
> The following message
> appear :
> Starting network
> panic: mii_phy_setmedia
> Stopped at
> Debugger+0x4:popl %ebp
>
> a "show panic" at the ddb prompt:
> mii_phy_setmedia
You can try this patch. Apply, run 'cd /sys/dev/mii && make', then build
a new kernel. Obviously you will need to get the new kernel on to the
machine somehow; you can probably get it to boot with "boot -c",
"disable bge", "quit" - then you will need to either use a USB ethernet
device to get the source tree onto the machine, or copy a kernel built
on another machine via USB storage.
Index: brgphy.c
===================================================================
RCS file: /cvs/src/sys/dev/mii/brgphy.c,v
retrieving revision 1.93
diff -u -p -r1.93 brgphy.c
--- brgphy.c 24 May 2010 21:23:23 -0000 1.93
+++ brgphy.c 19 Dec 2011 12:43:02 -0000
@@ -174,6 +174,8 @@ static const struct mii_phydesc brgphys[
MII_STR_xxBROADCOM2_BCM5709S },
{ MII_OUI_xxBROADCOM2, MII_MODEL_xxBROADCOM2_BCM5709CAX,
MII_STR_xxBROADCOM2_BCM5709CAX },
+ { MII_OUI_xxBROADCOM3, MII_MODEL_xxBROADCOM3_BCM57765,
+ MII_STR_xxBROADCOM3_BCM57765 },
{ MII_OUI_xxBROADCOM3, MII_MODEL_xxBROADCOM3_BCM57780,
MII_STR_xxBROADCOM3_BCM57780 },
{ MII_OUI_BROADCOM2, MII_MODEL_BROADCOM2_BCM5906,
Index: miidevs
===================================================================
RCS file: /cvs/src/sys/dev/mii/miidevs,v
retrieving revision 1.116
diff -u -p -r1.116 miidevs
--- miidevs 21 Jan 2011 09:46:13 -0000 1.116
+++ miidevs 19 Dec 2011 12:43:02 -0000
@@ -159,6 +159,7 @@ model xxBROADCOM2 BCM5709C 0x003c BCM570
model xxBROADCOM2 BCM5761 0x003d BCM5761 10/100/1000baseT PHY
model xxBROADCOM2 BCM5709S 0x003f BCM5709S 1000/2500baseSX PHY
model xxBROADCOM3 BCM57780 0x0019 BCM57780 10/100/1000baseT PHY
+model xxBROADCOM3 BCM57765 0x0024 BCM57765 10/100/1000baseT PHY
model BROADCOM BCM5400 0x0004 BCM5400 1000baseT PHY
model BROADCOM BCM5401 0x0005 BCM5401 1000baseT PHY
model BROADCOM BCM5411 0x0007 BCM5411 1000baseT PHY
Actually I don't see any reason why not to commit this as-is.
It may not work but it's certainly not going to make things worse.
Any OKs for this?
> I can't note "trace" message, i have no serial port on the mac... :(
Yes you can, just re-type it from the text on-screen. But in this case
the ramdisk dmesg you included is enough.
