Hi, I recently purchased an ASUS PCE-N15 Wireless-N PCI-E Adapter.
http://www.asus.com/Networks/Wireless_Adapters/PCEN15/ After i installed it and restarted my computer I got this in the dmesg (I'm assuming this is the ASUS adapter as it's the only new device message I noticed in the logs. I'll include the full dmesg so more knowledgeable minds can figure it out.) pci2 at ppb1 bus 2 vendor "Realtek", unknown product 0x8178 (class network subclass miscellaneous, rev 0x01) at pci2 dev 0 function 0 not configured It looks to be a half card and so I'm worried that I may have bought a win-device. Is this ASUS Adapter supported by OpenBSD, do I have a bad card, or is this a win-device? Thanks. Computer: AMD64 X4 OpenBSD 5.0 20 Dec snapshot. ifconfig -a lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33152 priority: 0 groups: lo inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 lladdr 1c:6f:65:83:06:26 priority: 0 groups: egress media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause) status: active inet6 fe80::1e6f:65ff:fe83:626%re0 prefixlen 64 scopeid 0x1 inet 10.0.1.7 netmask 0xffffff00 broadcast 10.0.1.255 enc0: flags=0<> priority: 0 groups: enc status: active dmesg OpenBSD 5.0-current (GENERIC.MP) #159: Tue Dec 20 11:02:37 MST 2011 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8586723328 (8188MB) avail mem = 8344002560 (7957MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (57 entries) bios0: vendor Award Software International, Inc. version "F2" date 06/07/2010 bios0: Gigabyte Technology Co., Ltd. GA-870A-UD3 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT HPET MCFG MATS TAMG APIC acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) SBAZ(S4) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE8(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) PS2M(S5) PS2K(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpihpet0 at acpi0: 14318180 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Phenom(tm) II X4 955 Processor, 3215.16 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative cpu0: apic clock running at 200MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD Phenom(tm) II X4 955 Processor, 3214.82 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative cpu2 at mainbus0: apid 2 (application processor) cpu2: AMD Phenom(tm) II X4 955 Processor, 3214.82 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative cpu3 at mainbus0: apid 3 (application processor) cpu3: AMD Phenom(tm) II X4 955 Processor, 3214.82 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (PEX0) acpiprt2 at acpi0: bus 7 (PEX1) acpiprt3 at acpi0: bus 8 (PEX2) acpiprt4 at acpi0: bus 9 (PEX3) acpiprt5 at acpi0: bus 5 (P2P_) acpiprt6 at acpi0: bus 1 (PCE2) acpiprt7 at acpi0: bus -1 (PCE3) acpiprt8 at acpi0: bus -1 (PCE4) acpiprt9 at acpi0: bus -1 (PCE5) acpiprt10 at acpi0: bus 2 (PCE6) acpiprt11 at acpi0: bus -1 (PCE7) acpiprt12 at acpi0: bus -1 (PCE8) acpiprt13 at acpi0: bus 3 (PCE9) acpiprt14 at acpi0: bus 4 (PCEA) acpiprt15 at acpi0: bus -1 (PCEB) acpiprt16 at acpi0: bus -1 (PCEC) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpicpu2 at acpi0: PSS acpicpu3 at acpi0: PSS acpibtn0 at acpi0: PWRB cpu0: 3214 MHz: speeds: 3200 2500 2100 800 MHz pci0 at mainbus0 bus 0 mem address conflict 0xe0000000/0x20000000 pchb0 at pci0 dev 0 function 0 "ATI RX780 Host" rev 0x00 ppb0 at pci0 dev 2 function 0 "ATI RD790 PCIE" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x6779 rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci1 dev 0 function 1 vendor "ATI", unknown product 0xaa98 rev 0x00: msi azalia0: no supported codecs ppb1 at pci0 dev 6 function 0 "ATI RD790 PCIE" rev 0x00 pci2 at ppb1 bus 2 vendor "Realtek", unknown product 0x8178 (class network subclass miscellaneous, rev 0x01) at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 9 function 0 "ATI RD790 PCIE" rev 0x00 pci3 at ppb2 bus 3 "NEC xHCI" rev 0x03 at pci3 dev 0 function 0 not configured ppb3 at pci0 dev 10 function 0 "ATI RD790 PCIE" rev 0x00 pci4 at ppb3 bus 4 jmb0 at pci4 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x03 ahci0 at jmb0: apic 2 int 18, AHCI 1.0 scsibus0 at ahci0: 32 targets pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 2 int 18 for native-PCI interrupt pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) ahci1 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, AHCI 1.2 scsibus1 at ahci1: 32 targets ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x41: polling iic0 at piixpm0 spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide1 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVDRAM GH24NS70, GN00> ATAPI 5/cdrom removable wd0 at pciide1 channel 0 drive 1: <WDC WD10EALX-009BA0> wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 wd0(pciide1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2 int 16 azalia1: codecs: Realtek/0x0892 audio0 at azalia1 pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 pci5 at ppb4 bus 5 "TI TSB43AB23 FireWire" rev 0x00 at pci5 dev 14 function 0 not configured ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support ppb5 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi pci6 at ppb5 bus 6 jmb1 at pci6 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02 ahci2 at jmb1: apic 2 int 17, AHCI 1.0 scsibus3 at ahci2: 32 targets pciide2 at jmb1: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic 2 int 17 for native-PCI interrupt pciide2: channel 0 disabled (no drives) pciide2: channel 1 disabled (no drives) ppb6 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00: msi pci7 at ppb6 bus 7 re0 at pci7 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 2 int 17, address 1c:6f:65:83:06:26 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 ppb7 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00: msi pci8 at ppb7 bus 8 ppb8 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00: msi pci9 at ppb8 bus 9 ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 usb2 at ehci2: USB revision 2.0 uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 usb3 at ohci0: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci1: USB revision 1.0 uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x228 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 usb5 at ohci2: USB revision 1.0 uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb6 at ohci3: USB revision 1.0 uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 mtrr: Pentium Pro MTRR support uhidev0 at uhub3 port 5 configuration 1 interface 0 "KYE USB MOUSE" rev 1.10/0.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets root on wd0a (2cad2951779a3ead.a) swap on wd0b dump on wd0b acpi0: PM1 stuck (en 0x121 st 0x1), clearing umodem0 at uhub0 port 1 configuration 1 interface 0 "LG Electronics, Inc LG Mobile USB Modem" rev 2.00/0.00 addr 2 umodem0: data interface 1, has CM over data, has no break umodem0: status change notification available ucom0 at umodem0 ugen0 at uhub0 port 1 configuration 1 "LG Electronics, Inc LG Mobile USB Modem" rev 2.00/0.00 addr 2 ucom0 detached umodem0 detached ugen0 detached -- W. Steven Schneider <[email protected]>
