Hey.
I've installed onto an old machine (dmesg follows):
uname -rsv
OpenBSD 5.0 GENERIC#43
Every few minutes I see this on the console ...
ichiic0: abort failed, status 0x2<INTR>
... followed a minute or so later by ...
ichiic0: abort failed, status 0x40<INUSE>
... rinse and repeat.
This is a bog standard peecee that had a few doodads hanging off it
which I've gladly removed - a case switch and "some other item" which
I've never seen before but which only interfaces with the PSU and
appears to be an external rail or somesuch (it looks like a plugpack
connection).
Is this normal?
Do I have a hardware issue?
Should I provide more information?
Best wishes.
OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.60GHz ("GenuineIntel" 686-class) 2.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 266858496 (254MB)
avail mem = 252444672 (240MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/06/04, BIOS32 rev. 0 @
0xfb8e0, SMBIOS rev. 2.3 @ 0xf0800 (42 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 04/06/2004
bios0: Acer VERITON 5600G
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices HUB0(S5) UAR1(S5) UAR2(S5) USB0(S3) USB1(S3)
USB2(S3) USB3(S3) USBE(S3) MODM(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 60 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xa400 0xcc000/0x8000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x8000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 1
mem address conflict 0xfffff000/0x1000
dc0 at pci1 dev 1 function 0 "Lite-On PNIC" rev 0x21: apic 2 int 17,
address 00:a0:cc:39:d5:7e
lxtphy0 at dc0 phy 1: LXT970 10/100 PHY, rev. 0
sis0 at pci1 dev 2 function 0 "NS DP83815 10/100" rev 0x00, srr 100:
apic 2 int 18, address 00:0f:b5:fe:57:de
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI
0x002080, model 0x0008
ifmedia_set: no match for 0x20/0xffffffff
bge0 at pci1 dev 13 function 0 "Broadcom BCM5705" rev 0x03, BCM5705 A3
(0x3003): apic 2 int 22, address 00:0c:76:9c:fe:32
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4480B, 1.00> ATAPI
5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02:
apic 2 int 17
iic0 at ichiic0
admtm0 at iic0 addr 0x2d: 47m192
iic0: addr 0x2f 04=00 06=06 07=00 0c=00 0d=07 0e=85 0f=00 10=c4 11=10
12=00 13=60 14=14 15=62 16=01 17=06 words 00=ffff 01=ffff 02=ffff
03=ffff 04=00ff 05=ffff 06=06ff 07=00ff
"eeprom" at iic0 addr 0x50 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (f45372592f73524a.a) swap on wd0b dump on wd0b
