Hi all,
The following two lines appear in my dmesg:
ath0 at pci3 dev 0 function 0 "Atheros AR5212 (IBM MiniPCI)" rev 0x01:
apic 1 int 17 ath0: AR5424 10.3 phy 6.1 rf5424 10.2, WOR2W, address
00:19:7e:92:0a:45
I am trying to guess which card is installed based on information from dmesg.
And it seems that I have AR5212 card but the driver treats it as AR5424.
Is that assumption correct? Could I ask for any pointers on what to do next?
Is ar5k_ar5212_attach() in sys/dev/ic/ar5212.c the right place to make any
changes?
My primary aim is to setup wifi card in Host AP mode, which is impossible right
now (I am getting kernel panics).
Any suggestions are welcome.
Thanks,
Alex
OpenBSD 5.1-beta (GENERIC) #0: Mon Jan 23 21:14:01 NZDT 2012
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz ("GenuineIntel" 686-class)
1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF
real mem = 2112081920 (2014MB)
avail mem = 2067435520 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/18/07, BIOS32 rev. 0 @ 0xfdc60, SMBIOS
rev. 2.4 @ 0xe0010 (73 entries)
bios0: vendor LENOVO version "7LET56WW (1.26 )" date 10/18/2007
bios0: LENOVO 7742CTO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF! SSDT SSDT
SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) IGBE(S4) EXP0(S4)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4522" serial 1577 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x1000 0xd0000/0x1000 0xe0000/0x10000!
cpu0: Enhanced SpeedStep 1796 MHz: speeds: 1801, 1800, 1200, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
ppb0 at pci0 dev 1 function 0 "Intel GM965 PCIE" rev 0x0c: apic 1 int 16
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0429 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "Intel", unknown product 0x2a04 (class communications subclass
miscellaneous, rev 0x0c) at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM965 PT IDER" rev 0x0c: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel GM965 KT" rev 0x0c at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: msi, address
00:15:58:84:53:78
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: msi
azalia0: codecs: Analog Devices AD1984, Conexant/0x2bfa, using Analog Devices
AD1984
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1 int 20
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 21
pci3 at ppb2 bus 3
ath0 at pci3 dev 0 function 0 "Atheros AR5212 (IBM MiniPCI)" rev 0x01: apic 1
int 17
ath0: AR5424 10.3 phy 6.1 rf5424 10.2, WOR2W, address 00:19:7e:92:0a:45
ppb3 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 1 int 22
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 1 int 23
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 20
pci6 at ppb5 bus 13
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci7 at ppb6 bus 21
cbb0 at pci7 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
"Ricoh 5C832 Firewire" rev 0x04 at pci7 dev 0 function 1 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide1 channel 0 drive 0: <HITACHI HTS541612J9SA00>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-850, RB11> ATAPI 5/cdrom
removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub1 port 2 configuration 1 interface 0 "Huawei Incorporated Ideos"
rev 2.00/2.26 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <, Ideos, 0000> SCSI2 0/direct removable
cd1 at scsibus1 targ 1 lun 1: <, Ideos, 0000> SCSI2 5/cdrom removable
uvideo0 at uhub1 port 5 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/3.20 addr 3
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (f6cd23d47740d3bb.a) swap on wd0b dump on wd0b
sd0 detached
cd1 detached
scsibus1 detached
umass0 detached
urndis0 at uhub1 port 2 configuration 1 interface 0 "Huawei Incorporated Ideos"
rev 2.00/2.26 addr 2
urndis0: address 76:c8:e5:c7:d1:48
hw.sensors.acpitz0.temp0=53.00 degC (zone temperature)
hw.sensors.acpitz1.temp0=51.00 degC (zone temperature)
hw.sensors.acpibat0.volt0=10.80 VDC (voltage)
hw.sensors.acpibat0.volt1=12.23 VDC (current voltage)
hw.sensors.acpibat0.power0=14.82 W (rate)
hw.sensors.acpibat0.watthour0=58.14 Wh (last full capacity)
hw.sensors.acpibat0.watthour1=2.91 Wh (warning capacity)
hw.sensors.acpibat0.watthour2=0.20 Wh (low capacity)
hw.sensors.acpibat0.watthour3=56.74 Wh (remaining capacity), OK
hw.sensors.acpibat0.raw0=2 (battery charging), OK
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpithinkpad0.temp0=53.00 degC
hw.sensors.acpithinkpad0.temp1=46.00 degC
hw.sensors.acpithinkpad0.temp2=33.00 degC
hw.sensors.acpithinkpad0.temp3=53.00 degC
hw.sensors.acpithinkpad0.temp4=37.00 degC
hw.sensors.acpithinkpad0.temp6=31.00 degC
hw.sensors.acpithinkpad0.fan0=3028 RPM
hw.sensors.acpidock0.indicator0=Off (not docked)
hw.sensors.cpu0.temp0=50.00 degC
hw.sensors.aps0.temp0=53.00 degC
hw.sensors.aps0.temp1=53.00 degC
hw.sensors.aps0.indicator0=Off (Keyboard Active)
hw.sensors.aps0.indicator1=Off (Mouse Active)
hw.sensors.aps0.indicator2=On (Lid Open)
hw.sensors.aps0.raw0=506 (X_ACCEL)
hw.sensors.aps0.raw1=509 (Y_ACCEL)
hw.sensors.aps0.raw2=506 (X_VAR)
hw.sensors.aps0.raw3=509 (Y_VAR)
