Any line prior to that in ddb? uvm_fault or something?
On 2012-01-31, Kapetanakis Giannis <[email protected]> wrote: > Hi, > > One of my firewall/pimd multicast router got today in ddb after 2 > months, without any obvious reason. > There was no panic. However I got this trace which might be usefull to you. > > This was one of the first snapshots of 5.0. I updated after that to the > latest snapshot. > > regards > > Giannis > > > ddb{0}> trace > pf_find_state(d41f2100,e1b45ad8,2,dff4b800,1c) at pf_find_state+0x54 > pf_test_state_udp(e1b45b60,e1b45b50,2,2,d41f2100) at pf_test_state_udp+0x99 > pf_test(2,2,d4239000,e1b45ca4,0) at pf_test+0x78e > ip_output(dff4b800,0,0,1,e1b45d20) at ip_output+0x776 > mrt_ioctl(e00f3400,0,3b9aca00,2,d0a2dcc0) at mrt_ioctl+0x1b6 > mrt_ioctl(40,e1b45e3c,2c,0,40) at mrt_ioctl+0xa4a > ip_mrouter_set(d9cd5dd8,68,e1b45ef0,68,e1b45ef0) at ip_mrouter_set+0x7c9 > sosetopt(d9cd5dd8,0,68,dff4bc00,246) at sosetopt+0x54 > sys_setsockopt(d9e8f818,e1b45f64,e1b45f84,0,d3ffe540) at sys_setsockopt+0xc4 > syscall() at syscall+0x12d > > > PID PPID PGRP UID S FLAGS WAIT COMMAND > 23773 10764 10764 507 3 0x80 kqread pickup > *16400 1 16400 0 7 0x801000 pimd > 15109 1 15109 0 3 0x80 ttyin getty > 4115 1 4115 0 3 0x80 ttyin getty > 23977 1 23977 0 3 0x80 ttyin getty > 26477 1 26477 0 3 0x80 ttyin getty > 25508 1 25508 0 3 0x80 ttyin getty > 6819 1 6819 0 3 0x80 ttyin getty > 10151 1 10151 0 3 0x80 select cron > 2742 1 3724 0 3 0x80 select snmpd > 17907 10764 10764 507 3 0x80 kqread qmgr > 10764 1 10764 0 3 0x80 kqread master > 14727 1 14727 0 3 0x80 kqread ifstated > 25072 1 25072 0 3 0x80 select sshd > 27575 5262 30317 83 3 0x80 poll ntpd > 5262 30317 30317 83 3 0x80 poll ntpd > 30317 1 30317 0 3 0x80 poll ntpd > 1418 17063 17063 74 3 0x80 bpf pflogd > 17063 1 17063 0 3 0x80 netio pflogd > 20596 1021 1021 73 7 0x80 syslogd > 1021 1 1021 0 3 0x80 netio syslogd > 17 0 0 0 3 0x100200 aiodoned aiodoned > 16 0 0 0 3 0x100200 syncer update > 15 0 0 0 3 0x100200 cleaner cleaner > 14 0 0 0 3 0x100200 reaper reaper > 13 0 0 0 3 0x100200 pgdaemon pagedaemon > 12 0 0 0 3 0x100200 bored crypto > 11 0 0 0 3 0x100200 pftm pfpurge > 10 0 0 0 3 0x100200 usbtsk usbtask > 9 0 0 0 3 0x100200 usbatsk usbatsk > 8 0 0 0 3 0x100200 acpi0 acpi0 > 7 0 0 0 7 0x40100200 idle3 > 6 0 0 0 7 0x40100200 idle2 > 5 0 0 0 3 0x40100200 idle1 > 4 0 0 0 3 0x100200 bored syswq > 3 0 0 0 3 0x40100200 idle0 > 2 0 0 0 3 0x100200 kmalloc kmthread > 1 0 1 0 3 0x80 wait init > 0 -1 0 0 3 0x200 scheduler swapper > > OpenBSD 5.0-current (GENERIC.MP) #126: Sun Nov 20 16:48:02 MST 2011 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz ("GenuineIntel" 686-class) > 2.67 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > real mem = 3210981376 (3062MB) > avail mem = 3148365824 (3002MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 12/13/10, BIOS32 rev. 0 @ 0xfdb60, > SMBIOS rev. 2.5 @ 0xbf6c8000 (94 entries) > bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "6.00 Rev. > 1.09.2619.N1" date 12/13/2010 > bios0: FUJITSU PRIMERGY RX300 S6 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S4 S5 > acpi0: tables DSDT FACP TCPA SLIT SSDT SSDT SSDT SSDT SSDT SSDT SSDT > SSDT EINJ HEST BERT SSDT ERST SPCR DMAR MCFG HPET APIC BOOT > acpi0: wakeup devices PE0_(S4) PE1_(S4) PE3_(S4) PE5_(S4) PE7_(S4) > PE8_(S4) PE9_(S4) PE10(S4) PE1A(S4) PE1E(S4) USB1(S1) USB2(S1) USB3(S1) > USB4(S1) USB5(S1) USB6(S1) USB7(S1) USB8(S1) COM1(S1) COM2(S1) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-10 > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 133MHz > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz ("GenuineIntel" 686-class) > 2.67 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > cpu2 at mainbus0: apid 18 (application processor) > cpu2: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz ("GenuineIntel" 686-class) > 2.67 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > cpu3 at mainbus0: apid 20 (application processor) > cpu3: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz ("GenuineIntel" 686-class) > 2.67 GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > ioapic1 at mainbus0: apid 3 pa 0xfec80000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (PE1_) > acpiprt2 at acpi0: bus 2 (PE3_) > acpiprt3 at acpi0: bus 3 (PE5_) > acpiprt4 at acpi0: bus 4 (PE7_) > acpiprt5 at acpi0: bus 5 (PE8_) > acpiprt6 at acpi0: bus 6 (PE9_) > acpiprt7 at acpi0: bus 7 (PE10) > acpiprt8 at acpi0: bus 8 (PE1A) > acpiprt9 at acpi0: bus 9 (PE1E) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpicpu2 at acpi0: C3, C2, C1, PSS > acpicpu3 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: PWRB > acpiac0 at acpi0: AC unit online > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x2a00! 0xcb000/0x5c00 > 0xd0c00/0x200! 0xd0e00/0x1000 0xd1e00/0x1000 > ipmi at mainbus0 not configured > cpu0: Enhanced SpeedStep 2667 MHz: speeds: 2661, 2660, 2527, 2394, 2261, > 2128, 1995, 1862, 1729, 1596 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x13 > ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13: apic 3 int 4 > pci1 at ppb0 bus 1 > mfi0 at pci1 dev 0 function 0 "Symbios Logic MegaRAID SAS2108 GEN2" rev > 0x04: apic 3 int 4, 0x11761734 > mfi0: logical drives 1, version 12.4.0-0031, 512MB RAM > scsibus0 at mfi0: 1 targets > sd0 at scsibus0 targ 0 lun 0: <LSI, RAID 5/6 SAS 6G, 2.40> SCSI3 > 0/direct fixed naa.6003005700d24c20151664951f3f94ab > sd0: 139488MB, 512 bytes/sector, 285671424 sectors > ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13: apic 3 int 0 > pci2 at ppb1 bus 2 > em0 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: > msi, address 00:1b:21:8c:41:96 > em1 at pci2 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: > msi, address 00:1b:21:8c:41:97 > ppb2 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13: apic 3 int 2 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: apic 3 int 6 > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 8 function 0 "Intel X58 PCIE" rev 0x13: apic 3 int 7 > pci5 at ppb4 bus 5 > ppb5 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: apic 3 int 8 > pci6 at ppb5 bus 6 > ppb6 at pci0 dev 10 function 0 "Intel X58 PCIE" rev 0x13: apic 3 int 9 > pci7 at ppb6 bus 7 > "Intel X58 QuickPath" rev 0x13 at pci0 dev 16 function 0 not configured > "Intel X58 QuickPath" rev 0x13 at pci0 dev 16 function 1 not configured > "Intel X58 QuickPath" rev 0x13 at pci0 dev 17 function 0 not configured > "Intel X58 QuickPath" rev 0x13 at pci0 dev 17 function 1 not configured > "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured > "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured > "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured > "Intel X58 Throttle" rev 0x13 at pci0 dev 20 function 3 not configured > vendor "Intel", unknown product 0x342f (class system subclass interrupt, > rev 0x13) at pci0 dev 21 function 0 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 1 int 19 > uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 1 int 18 > uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 1 int 18 > ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 1 int 18 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb7 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 1 int 16 > pci8 at ppb7 bus 8 > em2 at pci8 dev 0 function 0 "Intel PRO/1000 PT (82575EB)" rev 0x02: > msi, address 00:19:99:98:e4:ea > em3 at pci8 dev 0 function 1 "Intel PRO/1000 PT (82575EB)" rev 0x02: > msi, address 00:19:99:98:e4:eb > ppb8 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: apic 1 int 16 > pci9 at ppb8 bus 9 > vga1 at pci9 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 1 int 23 > uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 1 int 22 > uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 1 int 21 > ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 1 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb9 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 > pci10 at ppb9 bus 10 > pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00 > ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: msi, AHCI 1.2 > scsibus1 at ahci0: 32 targets > cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM_GT30N, FT03> ATAPI > 5/cdrom removable > ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 1 > int 17 > iic0 at ichiic0 > iic0: addr 0x2e 00=40 words 00=4040 01=0000 02=0000 03=0000 04=0000 > 05=0000 06=0000 07=0000 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > kbc: cmd word write error > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > uhidev0 at uhub7 port 1 configuration 1 interface 0 "SILITEK USB > Keyboard and Mouse" rev 1.00/1.20 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd0 at ukbd0 mux 1 > wskbd0: connecting to wsdisplay0 > uhidev1 at uhub7 port 1 configuration 1 interface 1 "SILITEK USB > Keyboard and Mouse" rev 1.00/1.20 addr 2 > uhidev1: iclass 3/0, 2 report ids > ums0 at uhidev1 reportid 1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a swap on sd0b dump on sd0b > WARNING: / was not properly unmounted > carp: carp0 demoted group carp by 1 to 129 (carpdev) > carp: carp1 demoted group carp by 1 to 130 (carpdev) > carp: carp2 demoted group carp by 1 to 131 (carpdev) > carp: carp3 demoted group carp by 1 to 132 (carpdev) > carp: pfsync0 demoted group carp by 1 to 133 (pfsync bulk start) > carp: pfsync0 demoted group pfsync by 1 to 1 (pfsync bulk start) > carp: carp1 demoted group carp by -1 to 132 (carpdev) > carp: carp0 demoted group carp by -1 to 131 (carpdev) > carp: carp3 demoted group carp by -1 to 130 (carpdev) > carp: carp2 demoted group carp by -1 to 129 (carpdev) > carp: carp0 demoted group carp by 1 to 130 (carpdev) > carp: carp3 demoted group carp by 1 to 131 (carpdev) > carp: carp2 demoted group carp by 1 to 132 (carpdev) > carp1: state transition: BACKUP -> MASTER > arp_rtrequest: bad gateway value > carp: carp0 demoted group carp by -1 to 3 (carpdev) > carp: carp3 demoted group carp by -1 to 2 (carpdev) > carp: carp2 demoted group carp by -1 to 1 (carpdev) > carp: carp0 demoted group carp by 1 to 2 (carpdev) > carp: carp3 demoted group carp by 1 to 3 (carpdev) > carp: carp2 demoted group carp by 1 to 4 (carpdev) > carp: carp0 demoted group carp by -1 to 3 (carpdev) > carp: carp3 demoted group carp by -1 to 2 (carpdev) > carp: carp2 demoted group carp by -1 to 1 (carpdev) > carp0: state transition: BACKUP -> MASTER > arp_rtrequest: bad gateway value > carp3: state transition: BACKUP -> MASTER > arp_rtrequest: bad gateway value > carp2: state transition: BACKUP -> MASTER > arp_rtrequest: bad gateway value > carp1: state transition: MASTER -> BACKUP > carp0: state transition: MASTER -> BACKUP > carp3: state transition: MASTER -> BACKUP > carp2: state transition: MASTER -> BACKUP > carp: pfsync0 demoted group carp by -1 to 0 (pfsync bulk done) > carp: pfsync0 demoted group pfsync by -1 to 0 (pfsync bulk done) > carp0: state transition: BACKUP -> MASTER > arp_rtrequest: bad gateway value > carp3: state transition: BACKUP -> MASTER > arp_rtrequest: bad gateway value > carp2: state transition: BACKUP -> MASTER > arp_rtrequest: bad gateway value > carp1: state transition: BACKUP -> MASTER > arp_rtrequest: bad gateway value
