Hello, following a link recently posted here, I noticed that the page
http://catb.org/~esr/writings/luxury-part-deux.html opened with lynx(1) cannot be sent (``printed'') as e-mail. Opening web pages with lynx and sending them to myself is a standard procedure for me and - as far as I remember - never failed and does not fail on me for any other web page I have tried. While trying to avoid the problem I saved the page (lynx: ``print'', ``save to a local file'') and piped it to mail(1) with the same results. Appending the lynx(1) dump of the page to this message makes it fail as well (using mutt(1)). Error seen within lynx(1)/mail(1)/mutt(1): ``sendmail: ferror: 1'' Error seen in smtpd logs: ``smtpd[4122]: a53d8814: from=<lusr@lhost>, relay=1000@localhost [IPv6:::1], stat=LocalError (500 5.0.0 Pipelining not supported)'' Can anyone reproduce? Help on avoiding it? Thanks in advance, Marcus Some info below: $ grep -v -e "^#" /etc/mailer.conf sendmail /usr/sbin/smtpctl send-mail /usr/sbin/smtpctl mailq /usr/sbin/smtpctl makemap /usr/libexec/smtpd/makemap newaliases /usr/libexec/smtpd/makemap hoststat /usr/libexec/sendmail/sendmail purgestat /usr/libexec/sendmail/sendmail dmesg: OpenBSD 5.1-beta (GENERIC) #144: Mon Jan 30 16:22:03 MST 2012 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS, ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem = 1072689152 (1022MB) avail mem = 1045049344 (996MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/12/03, BIOS32 rev. 0 @ 0xfd7e0 apm0 at bios0: Power Management spec V1.2 pcibios0 at bios0: rev 2.1 @ 0xfd770/0x890 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #6 is the last bus bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04 intelagp0 at pchb0 agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000 ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: irq 11 drm0 at radeondrm0 uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 11 uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: irq 11 ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42 pci2 at ppb1 bus 2 mem address conflict 0x50000000/0x1000 mem address conflict 0x51000000/0x1000 cbb0 at pci2 dev 0 function 0 "TI PCI1520 CardBus" rev 0x01: irq 11 cbb1 at pci2 dev 0 function 1 "TI PCI1520 CardBus" rev 0x01: irq 11 ath0 at pci2 dev 2 function 0 "Atheros AR5212" rev 0x01: irq 11 ath0: AR5213A 5.9 phy 4.3 rf5112a 3.6, FCC2A*, address 00:1b:b1:ab:74:c1 fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: irq 11, address 00:09:6b:3f:67:a8 inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0 pcmcia1 at cardslot1 ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: 24-bit timer at 3579545Hz: SpeedStep pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <WDC WD3200BEVE-00A0HT0> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVRKD08, 1.00> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: irq 11 iic0 at ichiic0 auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 11, ICH3 AC97 ac97: codec id 0x41445348 (Analog Devices AD1881A) ac97: codec features headphone, Analog Devices Phat Stereo audio0 at auich0 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 5.9 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (10a8ab1121377141.a) swap on wd0b dump on wd0b
