On Sat, Feb 11, 2012 at 12:41 PM, Delan Azabani <[email protected]> wrote: > I have more information, hopefully useful, about this problem. To recap, > the installer bsd.rd fails to boot unless I 'disable athn' in UKC. The > installer bsd boots, but of course panics because there is no rootfs. I > managed to install OpenBSD using bsd.rd (with athn disabled), but upon booting > into OpenBSD, I get a fault with a nice trace: > > ======== BEGIN ======== > athn0 at pci2 dev 0 function 0 "Atheros AR9300" rev 0x01: apic 4 int 17 > uvm_fault(0xffffffff80d2a0a0, 0x0, 0, 1) -> e > kernel: page fault trap, code=0 > Stopped at B B B athn_write_serdes+0x15: movl B B 0(%r13,%rbx,4),%edx > athn_write_serdes() at athn_write_serdes+0x15 > athn_config_pcie() at athn_config_pcie+0x16 > ar9003_attach() at ar9003_attach+0x199 > athn_attach() at athn_attach+0x586 > athn_pci_attach() at athn_pci_attach+0x1de > config_attach() at config_attach+0x1d4 > pci_probe_device() at pci_probe_device+0x462 > pci_enumerate_bus() at pci_enumerate_bus+0xe9 > config_attach() at config_attach+0x1d4 > ppbattach() at ppbattach+0x32f > end trace frame: 0xffffffff80e30bf0, count: 0 > ddb{0}> > ======== B END B ======== > > Like the installer bsd.rd, the installed OpenBSD can boot by disabling athn > in UKC. Running 'ps' in ddb shows only 'swapper' running, nothing else. > Hopefully someone will be able to gather something from this trace.
Maybe you can try it as well http://www.openbsd.org/faq/faq2.html#Bugs So install of snapshot and use of system is possible when athn disabled in UKC, right? Did you try both i386 and amd64? Do you have latest BIOS in your system or are there some repairs available and related to your wifi device?
