Hello,
I ave this 5.0 box I just setup. It works nicely but on boot network
interfaces order seems to randomly change. The box has two bye nics, bge0 and
bge1.
Basically on reboot the box may pick a different device for the physical
interfaces than the time before. Swapping cables restores operation, but is
painful.
Everything is fine otherwise. dmesg and ifconfig output below.
thanks
dmesg:
OpenBSD 5.0 (GENERIC.MP) #59: Wed Aug 17 10:19:44 MDT 2011
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,
xTPR
real mem = 3219234816 (3070MB)
avail mem = 3156508672 (3010MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/08/07, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xf0450 (72 entries)
bios0: vendor Dell Inc. version "A09" date 01/08/2007
bios0: Dell Inc. Precision WorkStation 380
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5)
PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,
xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus -1 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus 3 (PCI5)
acpiprt5 at acpi0: bus 4 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x2000! 0xd1000/0x2000
0xd3000/0x1000
cpu0: Enhanced SpeedStep disabled by BIOS
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82955X Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel 82955X PCIE" rev 0x00: apic 8 int 16
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x014e rev
0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Sigmatel STAC9200
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 8 int 16
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 8 int 16, address 00:10:18:18:00:27
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 8 int 17
pci4 at ppb3 bus 4
bge1 at pci4 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
(0x4001): apic 8 int 17, address 00:12:3f:7c:c1:e6
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 23
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4482, E107> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1600JS-75N, 10.0> SCSI3 0/direct
fixed t10.ATA_WDC_WD1600JS-75NCB1_WD-WCANM1767909
sd0: 152587MB, 512 bytes/sector, 312500000 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5
spdmem1 at iic0 addr 0x51: 512MB DDR2 SDRAM ECC PC2-4200CL3
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5
spdmem3 at iic0 addr 0x53: 512MB DDR2 SDRAM ECC PC2-4200CL3
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Dell Dell USB Keyboard"
rev 1.10/3.06 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (732d42d879f94fb3.a) swap on sd0b dump on sd0b
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
ifconfig:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33196
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:10:18:18:00:27
priority: 0
groups: egress
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
inet 1.2.3.4 netmask 0xffffff00 broadcast 1.2.3.255
inet6 fe80::210:18ff:fe18:27%bge0 prefixlen 64 scopeid 0x1
bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:12:3f:7c:c1:e6
priority: 0
media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
status: active
inet 5.6.7.8 netmask 0xffffff00 broadcast 5.6.7.255
inet6 fe80::212:3fff:fe7c:c1e6%bge1 prefixlen 64 scopeid 0x2
enc0: flags=41<UP,RUNNING>
priority: 0
groups: enc
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33196
priority: 0
groups: pflog
