From: Otto Moerbeek [o...@drijf.net] Sent: 02 May 2012 12:47 To: Fergus Wilde Cc: misc@openbsd.org Subject: Re: Problems reading from (but not writing to?) LTO 5 Ultrium tape from i386 snapshot(s)
On Wed, May 02, 2012 at 11:29:54AM +0000, Fergus Wilde wrote: > Hello, > > I wonder if anyone can help me out with the following. Any or all > help, including 'this has nothing > to do with OBSD', or options to try passing > to the dump, happily received. In particular, I wonder > if my situation is > analogous with the facts of the case here: > http://old.nabble.com/Restore-from-SCSI-tape-on-recent-i386-snapshot-td288246 > 13.html > > although unlike the OP in this case I have *not* had it working right > beforehand > as this is a new machine. > > This is with snapshot 5.1 GENERIC.MP#253 > i386 and the two previous snapshots on my > local mirror. Dmesg and > /var/run/dmesg.boot below. > > Machine is an HP 350ML G6 using 3-disk hardware > RAID 5 with a Quantum Ultrium LTO 5 external drive. > > mt status: > # mt status > SCSI tape drive, residual=0 > ds=3<Mounted> > er=0 > blocksize: 0 (0) > density: 0 (0) > I (perhaps naively?) adapted the dump script at > http://www.openbsd.org/faq/faq14.html#Backup > > and when the script is run, > output appears promising: > > > # /usr/local/bin/backup > Starting Full Backup ... > DUMP: Date of this level 0 dump: Wed May 2 > 12:09:37 2012 > DUMP: Date of last level 0 dump: the epoch > DUMP: Dumping > /dev/rsd0a to /dev/nrst0 > DUMP: mapping (Pass I) [regular files] > DUMP: > mapping (Pass II) [directories] > DUMP: estimated 762797 tape blocks. > DUMP: > Volume 1 started at: Wed May 2 12:09:42 2012 > DUMP: dumping (Pass III) > [directories] > DUMP: dumping (Pass IV) [regular files] > DUMP: 779165 tape > blocks on 1 volume > DUMP: Date of this level 0 dump: Wed May 2 12:09:37 2012 > DUMP: Volume 1 completed at: Wed May 2 12:09:55 2012 > DUMP: Volume 1 took > 0:00:13 > DUMP: Volume 1 transfer rate: 59935 KB/s > DUMP: Date this dump > completed: Wed May 2 12:09:55 2012 > DUMP: Average transfer rate: 59935 KB/s > DUMP: level 0 dump on Wed May 2 12:09:37 2012 > DUMP: Closing /dev/nrst0 > DUMP: DUMP IS DONE > > And so on for the other mounts on the array. The amount of > time this takes appears realistic, but since > I can't successfully test the > dump, I don't know if it is 'really' doing a backup. > > Attempting to test the > dump: Try rewinding the tape: mt rewind This could be happening: /dev/nrst0 is a non-rewinding device. After a close it will not rewind automatically like /dev/rst0 does. So dump closes the file, but your restore starts at the current position. See also st(4). -Otto Thanks Otto, my bad - I should have said that the script does end with a rewind command, and I have also tried using mt rewind (and rewoffl followed by loading a different cartridge) only tog get an identical result. > # /sbin/restore -tvs 1 -f /dev/rst0 > Verify tape and initialize maps > restore: tape read error: Input/output error > > > For interest, I tried using tar > to backup the root partition. Again, this seemed to work fine from the write > side, but on attempting to read I again got an Input/output error. > > Thanks for > any thoughts! > > Dmesg: > > OpenBSD 5.1-current (GENERIC.MP) #253: Thu Apr 26 > 01:45:24 MDT 2012 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: > Intel(R) Xeon(R) CPU E5606 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V > MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > real mem > = 3881492480 (3701MB) > avail mem = 3807248384 (3630MB) > mainbus0 at root > bios0 > at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. > 2.7 @ 0xe77fe000 (134 entries) > bios0: vendor HP version "D22" date 05/05/2011 > bios0: HP ProLiant ML350 G6 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S4 S5 > acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC SRAT FFFF BERT HEST > DMAR SSDT SSDT SSDT SSDT SSDT > acpi0: wakeup devices > acpitimer0 at acpi0: > 3579545 Hz, 24 bits > acpimcfg0 at acpi0 addr 0xe8000000, bus 0-63 > acpihpet0 at > acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at > mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 133MHz > cpu1 at > mainbus0: apid 20 (application processor) > cpu1: Intel(R) Xeon(R) CPU E5606 @ > 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V > MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > cpu2 at > mainbus0: apid 2 (application processor) > cpu2: Intel(R) Xeon(R) CPU E5606 @ > 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V > MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > cpu3 at > mainbus0: apid 18 (application processor) > cpu3: Intel(R) Xeon(R) CPU E5606 @ > 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V > MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > ioapic0 > at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > ioapic1 at mainbus0: > apid 0 pa 0xfec80000, version 20, 24 pins > acpiprt0 at acpi0: bus 1 (IP2P) > acpiprt1 at acpi0: bus 3 (NIB1) > acpiprt2 at acpi0: bus 4 (PT01) > acpiprt3 at > acpi0: bus 5 (PT03) > acpiprt4 at acpi0: bus 8 (PT04) > acpiprt5 at acpi0: bus 11 > (PT05) > acpiprt6 at acpi0: bus 14 (PT07) > acpiprt7 at acpi0: bus 17 (PT09) > acpiprt8 at acpi0: bus 20 (PT0A) > acpiprt9 at acpi0: bus 0 (PCI0) > acpicpu0 at > acpi0: C3, C3, C1 > acpicpu1 at acpi0: C3, C3, C1 > acpicpu2 at acpi0: C3, C3, C1 > acpicpu3 at acpi0: C3, C3, C1 > acpitz0 at acpi0: critical temperature is 31 > degC > bios0: ROM list: 0xc0000/0xb000 0xcb000/0x3600! 0xce600/0x1a00 > 0xd0000/0x4000 0xd4000/0x800 > ipmi at mainbus0 not configured > pci0 at mainbus0 > bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 5520 > Host" rev 0x13 > ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13 > pci1 at > ppb0 bus 4 > ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev > 0x01: apic 0 int 4 > ciss0: 1 LD, HW rev 2, FW 5.14/5.14, 64bit fifo rro > scsibus0 at ciss0: 1 targets > sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL > VOLUME, 5.14> SCSI3 0/direct fixed > sd0: 953816MB, 512 bytes/sector, 1953415216 > sectors > ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x13 > pci2 at ppb1 > bus 23 > ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13 > pci3 at ppb2 > bus 5 > mpii0 at pci3 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi > scsibus1 at mpii0: 258 targets > st0 at scsibus1 targ 5 lun 0: <QUANTUM, ULTRIUM > 5, 3180> SCSI4 1/sequential removable naa.00e09e60001d700e > ppb3 at pci0 dev 4 > function 0 "Intel X58 PCIE" rev 0x13 > pci4 at ppb3 bus 8 > ppb4 at pci0 dev 5 > function 0 "Intel X58 PCIE" rev 0x13 > pci5 at ppb4 bus 11 > ppb5 at pci0 dev 6 > function 0 "Intel X58 PCIE" rev 0x13 > pci6 at ppb5 bus 24 > ppb6 at pci0 dev 7 > function 0 "Intel X58 PCIE" rev 0x13 > pci7 at ppb6 bus 14 > ppb7 at pci0 dev 8 > function 0 "Intel X58 PCIE" rev 0x13 > pci8 at ppb7 bus 25 > ppb8 at pci0 dev 9 > function 0 "Intel X58 PCIE" rev 0x13 > pci9 at ppb8 bus 17 > ppb9 at pci0 dev 10 > function 0 "Intel X58 PCIE" rev 0x13 > pci10 at ppb9 bus 20 > pchb1 at pci0 dev 13 > function 0 vendor "Intel", unknown product 0x343a rev 0x13 > pchb2 at pci0 dev > 13 function 1 vendor "Intel", unknown product 0x343b rev 0x13 > pchb3 at pci0 > dev 13 function 2 vendor "Intel", unknown product 0x343c rev 0x13 > pchb4 at > pci0 dev 13 function 3 vendor "Intel", unknown product 0x343d rev 0x13 > pchb5 > at pci0 dev 13 function 4 "Intel 5520/X58 QuickPath" rev 0x13 > pchb6 at pci0 > dev 13 function 5 "Intel 5520 QuickPath" rev 0x13 > pchb7 at pci0 dev 13 > function 6 vendor "Intel", unknown product 0x341a rev 0x13 > pchb8 at pci0 dev > 14 function 0 vendor "Intel", unknown product 0x341c rev 0x13 > pchb9 at pci0 > dev 14 function 1 vendor "Intel", unknown product 0x341d rev 0x13 > pchb10 at > pci0 dev 14 function 2 vendor "Intel", unknown product 0x341e rev 0x13 > pchb11 > at pci0 dev 14 function 3 vendor "Intel", unknown product 0x341f rev 0x13 > pchb12 at pci0 dev 14 function 4 vendor "Intel", unknown product 0x3439 rev > 0x13 > "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured > "Intel > X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured > "Intel X58 RAS" > rev 0x13 at pci0 dev 20 function 2 not configured > ppb10 at pci0 dev 28 > function 0 "Intel 82801JI PCIE" rev 0x00 > pci11 at ppb10 bus 2 > ppb11 at pci11 > dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 > pci12 at ppb11 bus 3 > bge0 at > pci12 dev 4 function 0 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003): apic > 8 int 16, address e8:39:35:b6:f3:7e > brgphy0 at bge0 phy 1: BCM5714 > 10/100/1000baseT/SX PHY, rev. 0 > bge1 at pci12 dev 4 function 1 "Broadcom > BCM5715" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 17, address > e8:39:35:b6:f3:7f > brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. > 0 > uhci0 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 20 > uhci1 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 23 > uhci2 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 22 > uhci3 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 8 int 23 > ehci0 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 20 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb12 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" > rev 0x90 > pci13 at ppb12 bus 1 > vga1 at pci13 dev 3 function 0 "ATI ES1000" rev > 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: > screen 1-5 added (80x25, vt100 emulation) > radeondrm0 at vga1: apic 8 int 23 > drm0 at radeondrm0 > "Compaq iLO" rev 0x03 at pci13 dev 4 function 0 not > configured > "Compaq iLO" rev 0x03 at pci13 dev 4 function 2 not configured > uhci4 at pci13 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8 int 22 > "Hewlett-Packard IPMI" rev 0x00 at pci13 dev 4 function 6 not configured > usb1 > at uhci4: USB revision 1.0 > uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev > 1.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00 > pciide0 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel > 0 wired to native-PCI, channel 1 wired to native-PCI > pciide0: using apic 8 int > 17 for native-PCI interrupt > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus2 > at atapiscsi0: 2 targets > cd0 at scsibus2 targ 0 lun 0: <hp, DVD-RAM GH80N, > RS00> ATAPI 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA > mode 5 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI > root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 > "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 > at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 > port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > com1: probed fifo depth: 0 bytes > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for > kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 > (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at > isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; > using exception 16 > mtrr: Pentium Pro MTRR support > uhidev0 at uhub1 port 1 > configuration 1 interface 0 "HP Virtual Keyboard" rev 1.10/0.02 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country > code 33 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at > uhub1 port 1 configuration 1 interface 1 "HP Virtual Keyboard" rev 1.10/0.02 > addr 2 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons > wsmouse1 at ums0 mux 0 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at > softraid0: 256 targets > root on sd0a (bb6e325a3437c0e5.a) swap on sd0b dump on > sd0b > > /var/run/dmesg.boot: > OpenBSD 5.1-current (GENERIC.MP) #253: Thu Apr 26 > 01:45:24 MDT 2012 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: > Intel(R) Xeon(R) CPU E5606 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V > MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > real mem > = 3881492480 (3701MB) > avail mem = 3807248384 (3630MB) > mainbus0 at root > bios0 > at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. > 2.7 @ 0xe77fe000 (134 entries) > bios0: vendor HP version "D22" date 05/05/2011 > bios0: HP ProLiant ML350 G6 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S4 S5 > acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC SRAT FFFF BERT HEST > DMAR SSDT SSDT SSDT SSDT SSDT > acpi0: wakeup devices > acpitimer0 at acpi0: > 3579545 Hz, 24 bits > acpimcfg0 at acpi0 addr 0xe8000000, bus 0-63 > acpihpet0 at > acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at > mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 133MHz > cpu1 at > mainbus0: apid 20 (application processor) > cpu1: Intel(R) Xeon(R) CPU E5606 @ > 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V > MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > cpu2 at > mainbus0: apid 2 (application processor) > cpu2: Intel(R) Xeon(R) CPU E5606 @ > 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V > MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > cpu3 at > mainbus0: apid 18 (application processor) > cpu3: Intel(R) Xeon(R) CPU E5606 @ > 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,V > MX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,LAHF > ioapic0 > at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > ioapic1 at mainbus0: > apid 0 pa 0xfec80000, version 20, 24 pins > acpiprt0 at acpi0: bus 1 (IP2P) > acpiprt1 at acpi0: bus 3 (NIB1) > acpiprt2 at acpi0: bus 4 (PT01) > acpiprt3 at > acpi0: bus 5 (PT03) > acpiprt4 at acpi0: bus 8 (PT04) > acpiprt5 at acpi0: bus 11 > (PT05) > acpiprt6 at acpi0: bus 14 (PT07) > acpiprt7 at acpi0: bus 17 (PT09) > acpiprt8 at acpi0: bus 20 (PT0A) > acpiprt9 at acpi0: bus 0 (PCI0) > acpicpu0 at > acpi0: C3, C3, C1 > acpicpu1 at acpi0: C3, C3, C1 > acpicpu2 at acpi0: C3, C3, C1 > acpicpu3 at acpi0: C3, C3, C1 > acpitz0 at acpi0: critical temperature is 31 > degC > bios0: ROM list: 0xc0000/0xb000 0xcb000/0x3600! 0xce600/0x1a00 > 0xd0000/0x4000 0xd4000/0x800 > ipmi at mainbus0 not configured > pci0 at mainbus0 > bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 5520 > Host" rev 0x13 > ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13 > pci1 at > ppb0 bus 4 > ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev > 0x01: apic 0 int 4 > ciss0: 1 LD, HW rev 2, FW 5.14/5.14, 64bit fifo rro > scsibus0 at ciss0: 1 targets > sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL > VOLUME, 5.14> SCSI3 0/direct fixed > sd0: 953816MB, 512 bytes/sector, 1953415216 > sectors > ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x13 > pci2 at ppb1 > bus 23 > ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13 > pci3 at ppb2 > bus 5 > mpii0 at pci3 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi > scsibus1 at mpii0: 258 targets > st0 at scsibus1 targ 5 lun 0: <QUANTUM, ULTRIUM > 5, 3180> SCSI4 1/sequential removable naa.00e09e60001d700e > ppb3 at pci0 dev 4 > function 0 "Intel X58 PCIE" rev 0x13 > pci4 at ppb3 bus 8 > ppb4 at pci0 dev 5 > function 0 "Intel X58 PCIE" rev 0x13 > pci5 at ppb4 bus 11 > ppb5 at pci0 dev 6 > function 0 "Intel X58 PCIE" rev 0x13 > pci6 at ppb5 bus 24 > ppb6 at pci0 dev 7 > function 0 "Intel X58 PCIE" rev 0x13 > pci7 at ppb6 bus 14 > ppb7 at pci0 dev 8 > function 0 "Intel X58 PCIE" rev 0x13 > pci8 at ppb7 bus 25 > ppb8 at pci0 dev 9 > function 0 "Intel X58 PCIE" rev 0x13 > pci9 at ppb8 bus 17 > ppb9 at pci0 dev 10 > function 0 "Intel X58 PCIE" rev 0x13 > pci10 at ppb9 bus 20 > pchb1 at pci0 dev 13 > function 0 vendor "Intel", unknown product 0x343a rev 0x13 > pchb2 at pci0 dev > 13 function 1 vendor "Intel", unknown product 0x343b rev 0x13 > pchb3 at pci0 > dev 13 function 2 vendor "Intel", unknown product 0x343c rev 0x13 > pchb4 at > pci0 dev 13 function 3 vendor "Intel", unknown product 0x343d rev 0x13 > pchb5 > at pci0 dev 13 function 4 "Intel 5520/X58 QuickPath" rev 0x13 > pchb6 at pci0 > dev 13 function 5 "Intel 5520 QuickPath" rev 0x13 > pchb7 at pci0 dev 13 > function 6 vendor "Intel", unknown product 0x341a rev 0x13 > pchb8 at pci0 dev > 14 function 0 vendor "Intel", unknown product 0x341c rev 0x13 > pchb9 at pci0 > dev 14 function 1 vendor "Intel", unknown product 0x341d rev 0x13 > pchb10 at > pci0 dev 14 function 2 vendor "Intel", unknown product 0x341e rev 0x13 > pchb11 > at pci0 dev 14 function 3 vendor "Intel", unknown product 0x341f rev 0x13 > pchb12 at pci0 dev 14 function 4 vendor "Intel", unknown product 0x3439 rev > 0x13 > "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured > "Intel > X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured > "Intel X58 RAS" > rev 0x13 at pci0 dev 20 function 2 not configured > ppb10 at pci0 dev 28 > function 0 "Intel 82801JI PCIE" rev 0x00 > pci11 at ppb10 bus 2 > ppb11 at pci11 > dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 > pci12 at ppb11 bus 3 > bge0 at > pci12 dev 4 function 0 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003): apic > 8 int 16, address e8:39:35:b6:f3:7e > brgphy0 at bge0 phy 1: BCM5714 > 10/100/1000baseT/SX PHY, rev. 0 > bge1 at pci12 dev 4 function 1 "Broadcom > BCM5715" rev 0xa3, BCM5715 A3 (0x9003): apic 8 int 17, address > e8:39:35:b6:f3:7f > brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. > 0 > uhci0 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 20 > uhci1 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 23 > uhci2 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 22 > uhci3 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 8 int 23 > ehci0 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 20 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb12 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" > rev 0x90 > pci13 at ppb12 bus 1 > vga1 at pci13 dev 3 function 0 "ATI ES1000" rev > 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: > screen 1-5 added (80x25, vt100 emulation) > radeondrm0 at vga1: apic 8 int 23 > drm0 at radeondrm0 > "Compaq iLO" rev 0x03 at pci13 dev 4 function 0 not > configured > "Compaq iLO" rev 0x03 at pci13 dev 4 function 2 not configured > uhci4 at pci13 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8 int 22 > "Hewlett-Packard IPMI" rev 0x00 at pci13 dev 4 function 6 not configured > usb1 > at uhci4: USB revision 1.0 > uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev > 1.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00 > pciide0 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel > 0 wired to native-PCI, channel 1 wired to native-PCI > pciide0: using apic 8 int > 17 for native-PCI interrupt > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus2 > at atapiscsi0: 2 targets > cd0 at scsibus2 targ 0 lun 0: <hp, DVD-RAM GH80N, > RS00> ATAPI 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA > mode 5 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI > root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 > "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 > at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 > port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > com1: probed fifo depth: 0 bytes > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for > kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 > (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at > isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; > using exception 16 > mtrr: Pentium Pro MTRR support > uhidev0 at uhub1 port 1 > configuration 1 interface 0 "HP Virtual Keyboard" rev 1.10/0.02 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country > code 33 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at > uhub1 port 1 configuration 1 interface 1 "HP Virtual Keyboard" rev 1.10/0.02 > addr 2 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons > wsmouse1 at ums0 mux 0 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at > softraid0: 256 targets > root on sd0a (bb6e325a3437c0e5.a) swap on sd0b dump on > sd0b
