On Tue May 29, 2012 at 11:19:32PM -0400, STeve Andre' wrote:
> So... I just had my trusty Thinkpad W500 repaired, getting a new system
> board. Things seemed fine, till the machine shut down on me. It was
> graceful so the filesystems wern't dirty, but still wrong.
>
> Today, trying to compile the latest i386-current, it shut down on me
> three times. Here is what's in messages:
>
> May 29 19:15:36 paladin /bsd: acpithinkpad0: unknown event 0x6022
> May 29 19:15:36 paladin /bsd: acpitz1: critical temperature exceeded
> 100C (3732K), shutting down
> May 29 19:15:39 paladin syslogd: restart
> May 29 19:15:49 paladin syslogd: exiting on signal 15
>
> I'm trying to get a list of acpi events but that isn't proving easy. I am
> trying to figure out if I got a 'new' bad system board, or if I'm having
> other problems. The temperature is not 100C--it's been in the 70's
> each time this has happened. I think I have the latest bios, but I'll
> check.
>
The same issue with Thinkpad T400s (newest BIOS) on -current amd64 but
no event 0x6022 message. See. dmesg:
OpenBSD 5.1-current (GENERIC) #236: Thu Apr 26 01:21:20 MDT 2012
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 8474267648 (8081MB)
avail mem = 8226365440 (7845MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
bios0: vendor LENOVO version "6HET36WW (1.21 )" date 12/19/2011
bios0: LENOVO 2815W14
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET BOOT ASF! SSDT TCPA DMAR SSDT
SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4)
EXP3(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.53GHz, 2527.32 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 266MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 14 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4690" serial 8459 type LION oem "Panasonic"
acpibat1 at acpi0: BAT1 model "42T4679" serial 87 type LiP oem "SONY"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2534, 2533, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
puc0 at pci0 dev 3 function 3 "Intel GM45 AMT SOL" rev 0x07: ports: 1 com
com2 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com2: probed fifo depth: 15 bytes
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
00:24:7e:6d:ff:35
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant/0x5069
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R,
MoW, address 00:21:6a:5f:11:92
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 5
sdhc0 at pci3 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x01: apic 1 int 19
sdmmc0 at sdhc0
"Ricoh 5U230 Memory Stick" rev 0x01 at pci3 dev 0 function 1 not configured
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 14
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MMCRE28G, VBM1> SCSI3 0/direct
fixed t10.ATA_SAMSUNG_MMCRE28G8MXP-0VBL1_YCC000S930SY930A7915
sd0: 122104MB, 512 bytes/sector, 250069680 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
mtrr: Pentium Pro MTRR support
acpithinkpad0: unknown event 0x6000
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/23.38 addr 2
video0 at uvideo0
umodem0 at uhub1 port 4 configuration 1 interface 1 "Ericsson Ericsson F3507g
Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub1 port 4 configuration 1 interface 3 "Ericsson Ericsson F3507g
Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
cdce0 at uhub1 port 4 configuration 1 interface 7 "Ericsson Ericsson F3507g
Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
cdce0: address 02:80:37:ec:02:00
umodem2 at uhub1 port 4 configuration 1 interface 9 "Ericsson Ericsson F3507g
Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
umodem2: data interface 12, has CM over data, has break
umodem2: no data interface
ugen0 at uhub1 port 4 configuration 1 "Ericsson Ericsson F3507g Mobile
Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (96d8bb6c60c4990d.a) swap on sd0b dump on sd0b
/dev/sd0j: file system not clean; please fsck(8)
