On Sat, Jun 16, 2012 at 11:20:33PM -0500, eagir...@cox.net wrote:
> Since the 12 June snapshot I have been unable to run fvwm, either
> from xdm or using startx. Dmesg and Xorg.log below.
It should be fixed in the next snapshot.
> --
> Ed Ahlsen-Girard
> Ft. Walton Beach FL
>
> OpenBSD 5.1-current (GENERIC) #231: Tue Jun 12 18:31:26 MDT 2012
> t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 686-class) 2.66 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem = 1072713728 (1023MB)
> avail mem = 1044353024 (995MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 09/23/03, BIOS32 rev. 0 @ 0xffe90,
> SMBIOS rev. 2.3 @ 0xf0450 (56 entries)
> bios0: vendor Dell Computer Corporation version "A08" date 09/23/2003
> bios0: Dell Computer Corporation Dimension 4550
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S1 S3 S4 S5
> acpi0: tables DSDT FACP SSDT APIC BOOT ASF!
> acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3) PCI1(S5)
> KBD_(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 132MHz
> ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 8
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (PCI1)
> acpicpu0 at acpi0
> acpibtn0 at acpi0: VBTN
> bios0: ROM list: 0xc0000/0xf800 0xcf800/0x800 0xe0000/0x1800 0xe1800/0x2800
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
> intelagp0 at pchb0
> agp0 at intelagp0: aperture at 0xe8000000, size 0x8000000
> ppb0 at pci0 dev 1 function 0 "Intel 82845G AGP" rev 0x01
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 420" rev 0xa3
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: apic 8 int 16
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: apic 8 int 19
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: apic 8 int 18
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: apic 8 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
> pci2 at ppb1 bus 2
> cmpci0 at pci2 dev 0 function 0 "C-Media Electronics CMI8738/C3DX Audio" rev
> 0x10: apic 8 int 21
> audio0 at cmpci0
> opl at cmpci0 not configured
> mpu at cmpci0 not configured
> vendor "Broadcom", unknown product 0x4212 (class communications subclass
> modem, rev 0x02) at pci2 dev 1 function 0 not configured
> fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: apic 8 int
> 20, address 00:07:e9:c3:c0:ba
> inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <WDC WD600BB-75CAA0>
> wd0: 16-sector PIO, LBA, 57220MB, 117187500 sectors
> wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00JJC0>
> wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+RW ND-1100A, 10GE> ATAPI 5/cdrom
> removable
> wd2 at pciide0 channel 1 drive 1: <WDC WD800JB-00JJC0>
> wd2: 16-sector PIO, LBA, 76319MB, 156301488 sectors
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: apic 8 int
> 17
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
> spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> mtrr: Pentium Pro MTRR support
> ulpt0 at uhub2 port 2 configuration 1 interface 1 "hp officejet 5500 series"
> rev 2.00/1.00 addr 2
> ulpt0: using bi-directional mode
> ugen0 at uhub2 port 2 configuration 1 "hp officejet 5500 series" rev
> 2.00/1.00 addr 2
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd1a swap on wd1b dump on wd1b
>
>
> Xorg.log
>
>
> [ 15.319] (II) Loading /usr/X11R6/lib/modules/libxaa.so
> [ 15.355] (II) Module xaa: vendor="X.Org Foundation"
> [ 15.355] compiled for 1.12.2, module version = 1.2.1
> [ 15.355] ABI class: X.Org Video Driver, version 12.0
> [ 15.355] (II) Loading sub module "ramdac"
> [ 15.355] (II) LoadModule: "ramdac"
> [ 15.355] (II) Module "ramdac" already built-in
> [ 15.355] (II) UnloadModule: "vesa"
> [ 15.355] (II) Unloading vesa
> [ 15.355] (--) Depth 24 pixmap format is 32 bpp
> [ 15.367] Segmentation fault at address 0x0
> [ 15.367]
> Fatal server error:
> [ 15.367] Caught signal 11 (Segmentation fault). Server aborting
> [ 15.367]
> [ 15.367]
> Please consult the The X.Org Foundation support
> at http://wiki.x.org
> for help.
> [ 15.367] Please also check the log file at "/var/log/Xorg.0.log" for
> additio
> nal information.
> [ 15.367]
> [ 15.376] Server terminated with error (1). Closing log file.
>
--
Matthieu Herrb
