+++ Beck Zoltan Gyula [Sat, Nov 05, 2005 at 03:24:00PM +0100]: > Hi! > > I have installed OpenBSD 3.8 on a Compaq ProLiant DL360 server, but I > can't make the SMP work. Here is my dmesg: > > Best Regards > Zoltan Beck > > OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) > 1.27 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > real mem = 2147049472 (2096728K) > avail mem = 1953083392 (1907308K) > using 4278 buffers containing 107454464 bytes (104936K) of memory > mainbus0 (root) > bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000 > pcibios0: PCI BIOS has 6 Interrupt Routing table entries > pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4 SouthBridge" > rev 0x00) > pcibios0: PCI bus #1 is the last bus > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xe8000/0x6000 0xee000/0x2000! > cpu0 at mainbus0: (uniprocessor) > cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) > 1.27 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06 > pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06 > pci1 at pchb1 bus 3 > fxp0 at pci1 dev 4 function 0 "Intel 82557" rev 0x08, i82559: irq 7, address > 00:02:a5:8c:9d:76 > inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 > fxp1 at pci1 dev 5 function 0 "Intel 82557" rev 0x08, i82559: irq 10, address > 00:02:a5:8c:9d:77 > inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4 > cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: irq 3 Compaq > Integrated Array > scsibus0 at cac0: 1 targets > sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID1 volume #, > SCSI2 0/direct fixed > sd0: 17359MB, 4357 cyl, 255 head, 32 sec, 512 bytes/sec, 35553120 sec total > vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured > ppb0 at pci0 dev 5 function 0 "Intel i960 RP PCI-PCI" rev 0x05 > pci2 at ppb0 bus 1 > "ATI Mach64 GV" rev 0x7a at pci2 dev 0 function 0 not configured > "Intel 80960RP ATU" rev 0x05 at pci0 dev 5 function 1 not configured > pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x51 > pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CRN-8245B, 2.18> SCSI0 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pmsi0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pmsi0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > sysbeep0 at pcppi0 > npx0 at isa0 port 0xf0/16: using exception 16 > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > biomask eb6d netmask efed ttymask ffef > pctr: 686-class user-level performance counters enabled > mtrr: Pentium Pro MTRR support > dkcsum: sd0 matches BIOS drive 0x80 > root on sd0a > rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
I had the same problem on a similar system. Ths works on my 1850R: (note: requires you install the compaq utils on-disk to get to the settings). Perhaps it will work for you too... http://marc.theaimsgroup.com/?l=openbsd-smp&m=109945626408248&w=2 HTH -- byr0n