Problems:
I have a Naga Razer, connected by usb to a usb pci card. This
razer creates two hid devices when inserted. One to control the mouse
and one to control the keys on the side of the mouse. The problem
seems to be two fold, one not reporting the devices, and two crashing
uhci. When the keyboard device is report, it functions fine and does
not crash. When the mouse device is reported, after an amount of
input, uhci gives an error and is halted. Plugging device into another
open usb port sometimes resets it, but the same problem follows until
all four ports do not function and require a reboot.
Please help!
OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.41 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF
real mem = 3219582976 (3070MB)
avail mem = 3156807680 (3010MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/12/08, BIOS32 rev. 0 @
0xfa6a0, SMBIOS rev. 2.5 @ 0xf0000 (38 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date
08/12/2008
bios0: EVGA nForce 750i SLI
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG APIC
acpi0: wakeup devices HUB0(S5) XVRA(S5) XVRB(S5) XVRC(S5) XVRD(S5)
UAR1(S5) PS2M(S4) PS2K(S4) USB0(S3) USB2(S3) AZAD(S5) MMAC(S5)
MMCI(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 25000000 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 3 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF
cpu3 at mainbus0: apid 2 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (HUB0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpitz0 at acpi0: critical temperature is 60 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xf800 0xd0000/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA C55 Host" rev 0xa2
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 1 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 2 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 3 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 4 not configured
"NVIDIA C55 Memory" rev 0xa2 at pci0 dev 0 function 5 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 6 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 0 function 7 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 0 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 1 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 2 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 3 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 4 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 5 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 1 function 6 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 2 function 0 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 2 function 1 not configured
"NVIDIA C55 Memory" rev 0xa1 at pci0 dev 2 function 2 not configured
ppb0 at pci0 dev 3 function 0 "NVIDIA C55 PCIE" rev 0xa1
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x05b1
rev 0xa2
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 vendor "NVIDIA", unknown product 0x05b1
rev 0xa2
pci3 at ppb2 bus 3
vga1 at pci3 dev 0 function 0 "ATI Radeon HD 4850" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 4 int 11
drm0 at radeondrm0
azalia0 at pci3 dev 0 function 1 "ATI Radeon HD 48xx HD Audio" rev
0x00: msi
azalia0: no supported codecs
ppb3 at pci2 dev 2 function 0 vendor "NVIDIA", unknown product 0x05b1
rev 0xa2
pci4 at ppb3 bus 4
ppb4 at pci0 dev 7 function 0 "NVIDIA C55 PCIE" rev 0xa1
pci5 at ppb4 bus 5
"NVIDIA MCP51 Host" rev 0xa2 at pci0 dev 9 function 0 not configured
pcib0 at pci0 dev 10 function 0 "NVIDIA MCP51 ISA" rev 0xa3
nviic0 at pci0 dev 10 function 1 "NVIDIA MCP51 SMBus" rev 0xa3
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
iic1 at nviic0
iic1: addr 0x20 01=df 09=ff 0e=0f 0f=0c 10=ff 11=ff 12=ff 13=ff words
00=0000 01=dfdf 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
lm1 at iic1 addr 0x2d: W83627DHG
iic1: addr 0x49 f8=00 f9=00 fa=00 fb=00 words 00=ffff 01=ffff 02=ffff
03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
"NVIDIA MCP51 Memory" rev 0xa3 at pci0 dev 10 function 2 not
configured
ohci0 at pci0 dev 11 function 0 "NVIDIA MCP51 USB" rev 0xa3: apic 4
int 5, version 1.0, legacy support
ohci0: SMM does not respond, will reset
ehci0 at pci0 dev 11 function 1 "NVIDIA MCP51 USB" rev 0xa3: apic 4
int 10
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 13 function 0 "NVIDIA MCP51 IDE" rev 0xa1: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 14 function 0 "NVIDIA MCP51 SATA" rev 0xa1: DMA
pciide1: using apic 4 int 10 for native-PCI interrupt
pciide2 at pci0 dev 15 function 0 "NVIDIA MCP51 SATA" rev 0xa1: DMA
pciide2: using apic 4 int 11 for native-PCI interrupt
wd0 at pciide2 channel 0 drive 0:
wd0: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 6
ppb5 at pci0 dev 16 function 0 "NVIDIA MCP51 PCI-PCI" rev 0xa2
pci6 at ppb5 bus 6
"TI TSB43AB22 FireWire" rev 0x00 at pci6 dev 7 function 0 not
configured
ral0 at pci6 dev 9 function 0 "Ralink RT2561S" rev 0x00: apic 4 int 5,
address 00:1a:70:ad:00:35
ral0: MAC/BBP RT2561C, RF RT2527
uhci0 at pci6 dev 10 function 0 "VIA VT83C572 USB" rev 0x61: apic 4
int 10
uhci1 at pci6 dev 10 function 1 "VIA VT83C572 USB" rev 0x61: apic 4
int 5
ehci1 at pci6 dev 10 function 2 "VIA VT6202 USB" rev 0x63: apic 4 int
11
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "VIA EHCI root hub" rev 2.00/1.00 addr 1
"VIA VT6306 FireWire" rev 0x46 at pci6 dev 10 function 3 not
configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
azalia1 at pci0 dev 16 function 1 "NVIDIA MCP51 HD Audio" rev 0xa2:
msi
azalia1: codecs: Realtek ALC888
audio0 at azalia1
nfe0 at pci0 dev 20 function 0 "NVIDIA MCP51 LAN" rev 0xa3: apic 4 int
11, address 00:1f:bc:07:cc:5f
nfe0: no PHY found!
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x25
lm2 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb4 at ohci0: USB revision 1.0
uhub4 at usb4 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
lm1: disabling sensors due to alias with lm2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Razer Razer Naga"
rev 2.00/2.00 addr 2
uhidev0: no report descriptor
uhidev1 at uhub2 port 2 configuration 1 interface 1 "vendor 0x1532
Razer Naga" rev 2.00/2.00 addr 2
uhidev1: iclass 3/0
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (be54c7daab5a7ae3.a) swap on wd0b dump on wd0b
uhidev0 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Razer product
0x0015" rev 2.00/2.00 addr 2
uhidev0: no report descriptor
uhidev1 at uhub2 port 2 configuration 1 interface 1 "vendor 0x1532
product 0x0015" rev 2.00/2.00 addr 2
uhidev1: no report descriptor
uhidev0 detached
uhidev1 detached
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Razer product
0x0015" rev 2.00/2.00 addr 2
uhidev0: no report descriptor
uhidev1 at uhub2 port 1 configuration 1 interface 1 "vendor 0x1532
product 0x0015" rev 2.00/2.00 addr 2
uhidev1: no report descriptor
uhidev0 detached
uhidev1 detached
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Razer product
0x0015" rev 2.00/2.00 addr 2
uhidev0: no report descriptor
uhidev1 at uhub3 port 2 configuration 1 interface 1 "vendor 0x1532
product 0x0015" rev 2.00/2.00 addr 2
uhidev1: iclass 3/0
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev0 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Razer product
0x0015" rev 2.00/2.00 addr 2
uhidev0: no report descriptor
uhidev1 at uhub3 port 1 configuration 1 interface 1 "vendor 0x1532
product 0x0015" rev 2.00/2.00 addr 2
uhidev1: no report descriptor
uhidev0 detached
uhidev1 detached
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Razer Razer Naga"
rev 2.00/2.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 7 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Razer Razer Naga"
rev 2.00/2.00 addr 2
uhidev1: iclass 3/0
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhci1: host controller process error
uhci1: host controller halted
START USBDEVLOGS
USBDEVS log (device is "off")
addr 1: EHCI root hub, NVIDIA
addr 1: EHCI root hub, VIA
addr 1: UHCI root hub, VIA
usbdevs: /dev/usb3: Input/output error
addr 1: OHCI root hub, NVIDIA
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
NVIDIA(0x10de), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
VIA(0x1106), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
VIA(0x1106), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
NVIDIA(0x10de), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
usbdevs: /dev/usb3: Input/output error
USBDEVS log2 (device is "on")
addr 1: EHCI root hub, NVIDIA
addr 1: EHCI root hub, VIA
addr 1: UHCI root hub, VIA
addr 2: Razer Naga, Razer
addr 1: OHCI root hub, NVIDIA
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
NVIDIA(0x10de), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
VIA(0x1106), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
VIA(0x1106), rev 1.00
port 1 powered
port 2 addr 2: full speed, power 100 mA, config 1, Razer
Naga(0x0015), Razer(0x1532), rev 2.00
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
NVIDIA(0x10de), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
usbdevs: /dev/usb3: Input/output error
