When I connect a Polar USB reader (interface to a Polar HRM) to a
machine running OpenBSD 5.2 current (see dmesg below), I get the
following errors (I tried different USB slots just in case some
cabling would be bad):
uhub6: port 3, set config at addr 2 failed
uhub6: device problem, disabling port 3
uhub6: port 4, set config at addr 2 failed
uhub6: device problem, disabling port 4
uhub6: port 3, set config at addr 2 failed
uhub6: device problem, disabling port 3
and the program to read data from the device doesn't find it.
Is this a problem in the OS itself? Any suggestion whether this
can be fixed?
Currently I'm using an old laptop running SuSE 9.3 where the device
is detected properly:
suse93 kernel: usb 2-1: new low speed USB device using uhci_hcd and address 3
suse93 kernel: usb 2-1: USB disconnect, address 3
and the program (s710d) recognizes the device:
Found Polar USB interface Vendor 0x0da4, ProdID 0x0001
Here's the dmesg for the machine:
OpenBSD 5.2-current (GENERIC.MP) #25: Tue Sep 11 11:51:08 MDT 2012
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8587247616 (8189MB)
avail mem = 8336228352 (7950MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (64 entries)
bios0: vendor American Megatrends Inc. version "1007" date 03/25/2010
bios0: ASUSTeK Computer INC. M4A88TD-M
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4)
PCEA(S4) RLAN(S4) SBAZ(S4) P0PC(S4) GEC_(S4) UHC1(S4) UHC2(S4) USB3(S4)
UHC4(S4) USB5(S4) UHC6(S4) UHC7(S4) PS2M(S4) PS2K(S4) UAR1(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Phenom(tm) II X6 1055T Processor, 2812.80 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) II X6 1055T Processor, 2812.48 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Phenom(tm) II X6 1055T Processor, 2812.48 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2: AMD erratum 721 detected and fixed
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Phenom(tm) II X6 1055T Processor, 2812.49 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3: AMD erratum 721 detected and fixed
cpu4 at mainbus0: apid 4 (application processor)
cpu4: AMD Phenom(tm) II X6 1055T Processor, 2812.49 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT
cpu4: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu4: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu4: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu4: AMD erratum 721 detected and fixed
cpu5 at mainbus0: apid 5 (application processor)
cpu5: AMD Phenom(tm) II X6 1055T Processor, 2812.49 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT
cpu5: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache, 6MB 64b/line 48-way L3 cache
cpu5: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu5: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu5: AMD erratum 721 detected and fixed
ioapic0 at mainbus0: apid 6 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE5)
acpiprt5 at acpi0: bus 2 (PCE6)
acpiprt6 at acpi0: bus -1 (PCE9)
acpiprt7 at acpi0: bus 3 (PCEA)
acpiprt8 at acpi0: bus 4 (P0PC)
acpiec0 at acpi0
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpicpu4 at acpi0: PSS
acpicpu5 at acpi0: PSS
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: PWRB
cpu0: 2812 MHz: speeds: 2800 2200 1500 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 2 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x016a rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:1b:21:78:d3:36
ppb2 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00),
apic 6 int 18, address e0:cb:4e:cf:4a:00
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 6 int 19, AHCI
1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD1001FALS-4, 05.0> SCSI3 0/direct
fixed naa.50014ee204fc992e
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, SAMSUNG HD103SJ, 1AJ1> SCSI3 0/direct fixed
naa.50024e9203b8a76b
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus0 targ 5 lun 0: <PHILIPS, DVD-ROM DROM6316, OD2F> ATAPI 5/cdrom
removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 6 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 6 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x41: polling
iic0 at piixpm0
sdtemp0 at iic0 addr 0x18: se97
sdtemp1 at iic0 addr 0x19: se97
sdtemp2 at iic0 addr 0x1a: cat34ts02
sdtemp3 at iic0 addr 0x1b: cat34ts02
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem2 at iic0 addr 0x52: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 6 int 16
azalia0: codecs: Realtek/0x0892
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 6 int 18,
version 1.0, legacy support
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 6 int 18,
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8721F rev 3, EC port 0x290
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhidev0 at uhub3 port 3 configuration 1 interface 0 "Fujitsu Component Type 6
Keyboard" rev 1.00/1.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 4 configuration 1 interface 0 "Dell Dell USB Mouse" rev
2.00/1.10 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (e8b1895362709451.a) swap on sd0b dump on sd0b
