I bought a new laptop, and installed OpenBSD 5.1 on it next to Windows 7. I installed from the official OpenBSD 5.1 installation disks, using the laptop's CD-ROM drive. That worked well.
But now, when running OpenBSD, I can't mount the CD-ROM drive, or read from it. Can anyone provide me with help or insight into how I can get the drive working? I still have the option of returning the laptop if I bought incompatible hardware, but I like the machine and would prefer to keep it if I can get the basics working. Thanks very much in advance! Don Ginn --- HP Pavilion g7-2010nr laptop PC (Intel Core i3) Installed OpenBSD 5.1 dual-boot next to Windows 7 (Boots from either BIOS, or Windows 7 boot loader, even though root partition is >200GB into disk!) Installed from the official 5.1 installation CDs, from the drive that isn't working in Open. Using the kernel from the 5.1 installation (MP): $ su Password: # # ls -l /bsd* -rw-r--r-- 1 root wheel 9013244 Sep 22 19:03 /bsd -rw-r--r-- 1 root wheel 9013244 Sep 22 19:03 /bsd.mp.5.1 -rw-r--r-- 1 root wheel 9129047 Sep 21 10:58 /bsd.mp.current -rw-r--r-- 1 root wheel 6427696 Sep 22 19:03 /bsd.rd.5.1 -rw-r--r-- 1 root wheel 8993610 Sep 22 19:03 /bsd.sp.5.1 -rw-r--r-- 1 root wheel 9105340 Sep 21 10:58 /bsd.sp.current # # ls -l /dev/*cd* brw-r----- 1 root operator 6, 0 Sep 23 02:24 /dev/cd0a brw-r----- 1 root operator 6, 2 Sep 23 02:24 /dev/cd0c brw-r----- 1 root operator 6, 16 Sep 22 23:03 /dev/cd1a brw-r----- 1 root operator 6, 18 Sep 22 23:03 /dev/cd1c crw-r----- 1 root operator 15, 0 Sep 23 02:24 /dev/rcd0a crw-r----- 1 root operator 15, 2 Sep 23 02:24 /dev/rcd0c crw-r----- 1 root operator 15, 16 Sep 22 23:03 /dev/rcd1a crw-r----- 1 root operator 15, 18 Sep 22 23:03 /dev/rcd1c # # ls -l /mnt total 8 drwxr-xr-x 2 root wheel 512 Sep 23 01:42 cdrom drwxr-xr-x 2 root wheel 512 Sep 22 23:34 usb # # disklabel cd0 # /dev/rcd0c: type: ATAPI disk: ATAPI CD-ROM label: fictitious duid: 0000000000000000 flags: bytes/sector: 2048 sectors/track: 100 tracks/cylinder: 1 sectors/cylinder: 100 cylinders: 4001 total sectors: 400000 boundstart: 0 boundend: 400000 drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] c: 400000 0 unused # # mount -t cd9660 /dev/cd0a /mnt/cdrom mount_cd9660: /dev/cd0a on /mnt/cdrom: Device not configured # # mount -t cd9660 /dev/cd0c /mnt/cdrom mount_cd9660: /dev/cd0c on /mnt/cdrom: Input/output error # # dd if=/dev/cd0a of=cd.img bs=512 count=2 dd: /dev/cd0a: Device not configured # # dd if=/dev/cd0c of=cd.img bs=512 count=2 dd: /dev/cd0c: Input/output error 0+0 records in 0+0 records out 0 bytes transferred in 0.000 secs (0 bytes/sec) # # eject cd0 # # successfully ejects cd # $ su Password: # # ls -l /bsd* -rw-r--r-- 1 root wheel 9129047 Sep 21 10:58 /bsd -rw-r--r-- 1 root wheel 9013244 Sep 22 19:03 /bsd.mp.5.1 -rw-r--r-- 1 root wheel 9129047 Sep 21 10:58 /bsd.mp.current -rw-r--r-- 1 root wheel 6427696 Sep 22 19:03 /bsd.rd.5.1 -rw-r--r-- 1 root wheel 8993610 Sep 22 19:03 /bsd.sp.5.1 -rw-r--r-- 1 root wheel 9105340 Sep 21 10:58 /bsd.sp.current # # disklabel cd0 # /dev/rcd0c: type: ATAPI disk: ATAPI CD-ROM label: fictitious duid: 0000000000000000 flags: bytes/sector: 2048 sectors/track: 100 tracks/cylinder: 1 sectors/cylinder: 100 cylinders: 4001 total sectors: 400000 boundstart: 0 boundend: 400000 drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] c: 400000 0 unused # # mount -t cd9660 /dev/cd0a /mnt/cdrom mount_cd9660: /dev/cd0a on /mnt/cdrom: Device not configured # # mount -t cd9660 /dev/cd0c /mnt/cdrom mount_cd9660: /dev/cd0c on /mnt/cdrom: Input/output error # # dd if=/dev/cd0a of=cd.img bs=512 count=2 dd: /dev/cd0a: Device not configured # # dd if=/dev/cd0c of=cd.img bs=512 count=2 dd: /dev/cd0c: Input/output error 0+0 records in 0+0 records out 0 bytes transferred in 0.000 secs (0 bytes/sec) # # eject cd0 # # cd successfully ejected # ---------------------------- Dmesg from the kernel from the 5.1 installation (MP): OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> cpu0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz ("GenuineIntel" 686-class) 2.30 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,LAHF real mem = 2858729472 (2726MB) avail mem = 2801852416 (2672MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/31/12, BIOS32 rev. 0 @ 0xef725, SMBIOS rev. 2.7 @ 0xe6e00 (27 entries) bios0: vendor Insyde version "F.09" date 05/31/2012 bios0: Hewlett-Packard HP Pavilion g7 Notebook PC acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP UEFI ASF! HPET APIC MCFG SLIC WDAT SSDT BOOT ASPT FPDT SSDT SSDT acpi0: wakeup devices P0P1(S4) PS2K(S3) PS2M(S3) PEG0(S4) PEGP(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) RP01(S0) RP02(S4) PXSX(S5) RP03(S0) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 99MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz ("GenuineIntel" 686-class) 2.30 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,LAHF cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz ("GenuineIntel" 686-class) 2.30 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,LAHF cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz ("GenuineIntel" 686-class) 2.30 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,LAHF ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus -1 (PEG0) acpiprt3 at acpi0: bus 1 (RP01) acpiprt4 at acpi0: bus 2 (RP02) acpiprt5 at acpi0: bus 3 (RP03) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpicpu2 at acpi0: C3, C2, C1, PSS acpicpu3 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0acpitz0: TZ01: failed to read _CRT : no critical temperature defined acpiac0 at acpi0: AC unit offline acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: PWRB acpibat0 at acpi0: BAT0 model "Primary" serial type LION oem "Hewlett-Packard" acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD02 bios0: ROM list: 0xc0000/0xee00 cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel GT2 Video" rev 0x09 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xb0000000, size 0x10000000 inteldrm0 at vga1: apic 0 int 16 drm0 at inteldrm0 "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured vendor "Intel", unknown product 0x1e3a (class communications subclass miscellaneous, rev 0x04) at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 vendor "Intel", unknown product 0x1e2d rev 0x04: apic 0 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 vendor "Intel", unknown product 0x1e20 rev 0x04: msi azalia0: codecs: IDT/0x76d9, Intel/0x2806, using IDT/0x76d9 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 vendor "Intel", unknown product 0x1e10 rev 0xc4: apic 0 int 17 pci1 at ppb0 bus 1 vendor "Ralink", unknown product 0x539a (class network subclass miscellaneous, rev 0x00) at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 28 function 1 vendor "Intel", unknown product 0x1e12 rev 0xc4: apic 0 int 16 pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), apic 0 int 17, address 28:92:4a:44:dc:c7 ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI 0x000732, model 0x0008 ppb2 at pci0 dev 28 function 2 vendor "Intel", unknown product 0x1e14 rev 0xc4: apic 0 int 18 pci3 at ppb2 bus 3 vendor "Realtek", unknown product 0x5229 (class undefined unknown subclass 0x00, rev 0x01) at pci3 dev 0 function 0 not configured ehci1 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x1e26 rev 0x04: apic 0 int 20 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x1e59 rev 0x04 ahci0 at pci0 dev 31 function 2 vendor "Intel", unknown product 0x1e03 rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK6476GS, GS00> SCSI3 0/direct fixed naa.5000039405a80a90 sd0: 610480MB, 512 bytes/sector, 1250263728 sectors cd0 at scsibus0 targ 4 lun 0: <hp, CDDVDW SN-208BB, HH03> ATAPI 5/cdrom removable vendor "Intel", unknown product 0x1e22 (class serial bus subclass SMBus, rev 0x04) at pci0 dev 31 function 3 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 7.5 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uvideo0 at uhub3 port 5 configuration 1 interface 0 "DCQEK02RS2TMVL HP Webcam-50" rev 2.00/24.23 addr 3 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (5f9aa670531eb97d.a) swap on sd0b dump on sd0b OpenBSD 5.2-current (GENERIC.MP) #27: Fri Sep 21 04:00:49 MDT 2012 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> cpu0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz ("GenuineIntel" 686-class) 2.30 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,LAHF real mem = 2858729472 (2726MB) avail mem = 2801074176 (2671MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/31/12, BIOS32 rev. 0 @ 0xef725, SMBIOS rev. 2.7 @ 0xe6e00 (27 entries) bios0: vendor Insyde version "F.09" date 05/31/2012 bios0: Hewlett-Packard HP Pavilion g7 Notebook PC acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP UEFI ASF! HPET APIC MCFG SLIC WDAT SSDT BOOT ASPT FPDT SSDT SSDT acpi0: wakeup devices P0P1(S4) PS2K(S3) PS2M(S3) PEG0(S4) PEGP(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) RP01(S0) RP02(S4) PXSX(S5) RP03(S0) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 99MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz ("GenuineIntel" 686-class) 2.30 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,LAHF cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz ("GenuineIntel" 686-class) 2.30 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,LAHF cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz ("GenuineIntel" 686-class) 2.30 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,LAHF ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus -1 (PEG0) acpiprt3 at acpi0: bus 1 (RP01) acpiprt4 at acpi0: bus 2 (RP02) acpiprt5 at acpi0: bus 3 (RP03) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpicpu2 at acpi0: C3, C2, C1, PSS acpicpu3 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0acpitz0: TZ01: failed to read _CRT : no critical temperature defined acpiac0 at acpi0: AC unit offline acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: PWRB acpibat0 at acpi0: BAT0 model "Primary" serial type LION oem "Hewlett-Packard" acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD02 bios0: ROM list: 0xc0000/0xee00 cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xb0000000, size 0x10000000 inteldrm0 at vga1: apic 0 int 16 drm0 at inteldrm0 "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi azalia0: codecs: IDT/0x76d9, Intel/0x2806, using IDT/0x76d9 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 17 pci1 at ppb0 bus 1 vendor "Ralink", unknown product 0x539a (class network subclass miscellaneous, rev 0x00) at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 16 pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), apic 0 int 17, address 28:92:4a:44:dc:c7 ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI 0x000732, model 0x0008 ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 18 pci3 at ppb2 bus 3 vendor "Realtek", unknown product 0x5229 (class undefined unknown subclass 0x00, rev 0x01) at pci3 dev 0 function 0 not configured ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 20 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel HM76 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK6476GS, GS00> SCSI3 0/direct fixed naa.5000039405a80a90 sd0: 610480MB, 512 bytes/sector, 1250263728 sectors openings 31, bhi 124, blo 62 bufq_init, hi 124, low 62 cd0 at scsibus0 targ 4 lun 0: <hp, CDDVDW SN-208BB, HH03> ATAPI 5/cdrom removablebufq_init, hi 64, low 32 ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-12800 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 7.5 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uvideo0 at uhub3 port 5 configuration 1 interface 0 "DCQEK02RS2TMVL HP Webcam-50" rev 2.00/24.23 addr 3 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (5f9aa670531eb97d.a) swap on sd0b dump on sd0b ---------------------------- Extra lines show up on dmesg after mount/dd commands: cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x43 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x43 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x43 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x0 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x43 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28 SENSE KEY: Media Error ...
