Sorry guys, I try to install the 5.2-current too, the same output.
thanks. 2012/10/12 Walter Souza <[email protected]>: > Hello guys, > > I am trying to install the OpenBSD 5.1 on x3100 M4 and I got a panic > after installation while booting, unfortunately it has only USB and no > serial port and I can't type trace to get information. > > Here is what I got on my screen: > > acpicpu3 at acpi0: PSS > acpibtn0 at acpi0: PWRB > ipmi at mainbus0 not configured > cpu0: Enhanced SpeedStep 3093 MHz: speeds: 3100, 3000, 2900, 2800, > 2700, 2600, 2500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600 > MHz > pci0 at mainbus0 bus 0 > extent_alloc_region: extent 'pcimem' (0x0 = 0xfffffffff) > extent_alloc_region: start 0x3088c1b00000, end 0x3088c1b000ff > panic: extent_alloc_region: region lies outside extent > Stopped at Debugger+0x5: leave > Debugger() at Debugger+0x5 > panic() at panic+0xe4 > extent_alloc_region() at extent_alloc_region+0xb5 > pci_reserve_resources() at pci_reserve_resources+0x116 > pci_probe_device() at pci_probe_device+0x21b > pci_enumerate_bus() at pci_enumerate_bus+0xe9 > pciattach() at pciattach+0x107 > config_attach() at config_attach+0x1d4 > mainbus_attach() at mainbus_attach+0x165 > config_attach() at config_attach+0x1d4 > end trace frame: 0xffffffff80e6ae90, count: 0 > RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! > IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO. > DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! > ddb{0}> > > Thanks in advance, > Walter Neto - Ribeirão Preto - SP, Brazil
