Hi
I just install the last snapshot i386, and plug my Trendnet Ethernet
Adapter (TU2-ETG).
When i run this:
(ifconfig axe0 media ; dmesg ; sysctl hw.sensors)
axe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:50:b6:4e:5a:c9
priority: 0
media: Ethernet none (none)
supported media:
media none
OpenBSD 5.2-current (GENERIC.MP) #49: Mon Oct 15 09:51:24 MDT 2012
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.01
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,LAHF
real mem = 2138238976 (2039MB)
avail mem = 2092335104 (1995MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/04/06, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xf04e0 (67 entries)
bios0: vendor American Megatrends Inc. version "0602" date 10/04/2006
bios0: stem manufacturer P5LD2-MQ
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG ASF!
acpi0: wakeup devices P0P1(S4) P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4)
P0P7(S4) P0P8(S4) P0P9(S4) PS2K(S3) PS2M(S3) UAR1(S4) UAR2(S4) MC97(S4)
USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.01
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,LAHF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus 2 (P0P5)
acpicpu0 at acpi0acpi0: unable to load \\_PR_.CPU1.SSDT
acpicpu1 at acpi0acpi0: unable to load \\_PR_.CPU2.SSDT
aibs0 at acpi0: RTMP RVLT RFAN
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xac00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01:
msi
azalia0: codecs: Realtek ALC882
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2
int 16
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: msi,
address 00:17:31:c4:2e:b0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2
int 20
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2
int 17
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2
int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2
int 19
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 1
"TI TSB43AB22 FireWire" rev 0x00 at pci3 dev 3 function 0 not
configured
rl0 at pci3 dev 9 function 0 "Realtek 8139" rev 0x10: apic 2 int 21,
address 00:50:bf:93:44:4e
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD2500AAJB-00J3A0>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 17 for native-PCI interrupt
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-216D, 1.04> ATAPI
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic
2 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci3: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x63
lm1 at wbsio0 port 0x290/8: W83627EHF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (5ef37f74d05d92dd.a) swap on wd0b dump on wd0b
axe0 at uhub0 port 2 configuration 1 interface 0 "ASIX Electronics
AX88178" rev 2.00/0.01 addr 2
axe0: AX88178, address 00:50:b6:4e:5a:c9
hw.sensors.aibs0.temp0=45.50 degC (CPU Temperature), OK
hw.sensors.aibs0.temp1=38.00 degC (MB Temperature), OK
hw.sensors.aibs0.fan0=19852 RPM (CPU FAN Speed), OK
hw.sensors.aibs0.fan1=0 RPM (CHASSIS1 FAN Speed), WARNING
hw.sensors.aibs0.fan2=0 RPM (CHASSIS2 FAN Speed), WARNING
hw.sensors.aibs0.fan3=0 RPM (POWER FAN Speed), WARNING
hw.sensors.aibs0.volt0=1.33 VDC (Vcore Voltage), OK
hw.sensors.aibs0.volt1=3.20 VDC ( +3.3 Voltage), OK
hw.sensors.aibs0.volt2=4.84 VDC ( +5 Voltage), OK
hw.sensors.aibs0.volt3=11.98 VDC ( +12 Voltage), OK
hw.sensors.lm1.temp0=39.00 degC
hw.sensors.lm1.temp1=45.50 degC
hw.sensors.lm1.temp2=47.50 degC
hw.sensors.lm1.fan1=5273 RPM
hw.sensors.lm1.volt0=1.33 VDC (VCore)
hw.sensors.lm1.volt1=11.99 VDC (+12V)
hw.sensors.lm1.volt2=3.20 VDC (+3.3V)
hw.sensors.lm1.volt3=3.20 VDC (+3.3V)
hw.sensors.lm1.volt4=1.85 VDC (-12V)
hw.sensors.lm1.volt5=1.51 VDC
hw.sensors.lm1.volt6=1.52 VDC
hw.sensors.lm1.volt7=3.20 VDC (3.3VSB)
hw.sensors.lm1.volt8=0.78 VDC (VBAT)
hw.sensors.lm1.volt9=1.58 VDC
Thank you very much for your help.
--
Wesley
