On 11/23/12 21:26, rustyBSD wrote: > Le 23/11/2012 21:44, Nigel Taylor a écrit : >> On 11/23/12 16:56, rustyBSD wrote: >>> Le 23/11/2012 17:35, Nigel Taylor a écrit : >>>> That is not a REDWOOD chip, it's TURKS, and both should be supported, >>> >>> Ahh yes I didn't see this in xorg.0.log >>> >>>> the man page is wrong 6570 occurs both under REDWOOD and TURKS. >>>> REDWOOD are 5x50 series. Could still be in the wrong chip family. >>>> >>>> The Xorg.0.log should tell you if the card is detected, it can be >>>> rejected for some other reason, then fall back to next driver. >>>> >>>> Do you get a message in Xorg.0.log like, >>> >>> Yes, I have: >>> >>> [ 94.501] (II) VESA: driver for VESA chipsets: vesa >>> [ 94.502] (II) GPU only supported with KMS, using vesa instead. >>> [ 94.502] (II) Loading sub module "vbe" >>> >>>> GPU only supported with KMS, using vesa instead. >>> >>> I don't know if I'm wrong, but if I add >>> product ATI RADEON_HD6570 0x6759 Radeon HD 6570 >>> it should at least appear in dmesg, no ? >>> >>> >> Should appear in the dmesg, providing the include files have been >> updated, then you rebuilt the kernel and install it. By running make the >> pcidevs change should cause pcidevs.h pcidevs_data.h to be updated. >> >> You may need two product ID's, there may be audio also, as below the >> graphics is 0x6758 and audio is 0xaa90. >> >> pcidevs:product ATI RADEON_HD6670 0x6758 Radeon HD 6670 >> pcidevs:product ATI RADEON_HD6670_HDA 0xaa90 Radeon HD 6670 Audio >> >> pcidevs.h:#define PCI_PRODUCT_ATI_RADEON_HD6670 0x6758 >> /* Radeon HD 6670 */ >> pcidevs.h:#define PCI_PRODUCT_ATI_RADEON_HD6670_HDA 0xaa90 >> /* Radeon HD 6670 Audio */ >> >> pcidevs_data.h: PCI_VENDOR_ATI, PCI_PRODUCT_ATI_RADEON_HD6670, >> pcidevs_data.h: "Radeon HD 6670", >> pcidevs_data.h: PCI_VENDOR_ATI, PCI_PRODUCT_ATI_RADEON_HD6670_HDA, >> pcidevs_data.h: "Radeon HD 6670 Audio", >> >> >> >> >> There is a test in radeon_probe that the chip family SUMO and those >> after will only be supported with KMS, that includes the TURKS family of >> chips. >> >> The confusion between REDWOOD and TURKS is 6570 is TURKS, the mobility >> version of 6570 is REDWOOD and should be 6570M. >> >> >> >> >> > > So, what do I do ? > Here is the full dmesg, I should have post it before > > > OpenBSD 5.2-current (GENERIC.MP) #2: Fri Nov 23 22:13:59 CET 2012 > root@JackBSD:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2144862208 (2045MB) > avail mem = 2065338368 (1969MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (58 entries) > bios0: vendor American Megatrends Inc. version "2202" date 08/19/2010 > bios0: ASUSTeK Computer INC. M4A77T > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT > acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) > PCE9(S4) PCEA(S4) RLAN(S4) PCEB(S4) PCEC(S4) SBAZ(S4) PS2M(S4) PS2K(S4) > UAR1(S4) P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) UHC5(S4) UHC6(S4) > UHC7(S4) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Athlon(tm) II X3 455 Processor, 3315.29 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu0: AMD erratum 721 detected and fixed > cpu0: apic clock running at 200MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD Athlon(tm) II X3 455 Processor, 3314.90 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu1: AMD erratum 721 detected and fixed > cpu2 at mainbus0: apid 2 (application processor) > cpu2: AMD Athlon(tm) II X3 455 Processor, 3314.90 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC > cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu2: AMD erratum 721 detected and fixed > ioapic0 at mainbus0: apid 3 pa 0xfec00000, version 21, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (PCE2) > acpiprt2 at acpi0: bus -1 (PCE3) > acpiprt3 at acpi0: bus -1 (PCE4) > acpiprt4 at acpi0: bus -1 (PCE5) > acpiprt5 at acpi0: bus -1 (PCE6) > acpiprt6 at acpi0: bus -1 (PCE7) > acpiprt7 at acpi0: bus -1 (PCE9) > acpiprt8 at acpi0: bus 2 (PCEA) > acpiprt9 at acpi0: bus 3 (P0PC) > acpicpu0 at acpi0: PSS > acpicpu1 at acpi0: PSS > acpicpu2 at acpi0: PSS > aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM > acpibtn0 at acpi0: PWRB > cpu0: 3315 MHz: speeds: 3300 2600 2100 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "ATI RX780 Host" rev 0x00 > ppb0 at pci0 dev 2 function 0 "ATI RD790 PCIE" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x6759 rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 6670 Audio" rev 0x00: msi > azalia0: no supported codecs > ppb1 at pci0 dev 10 function 0 "ATI RD790 PCIE" rev 0x00 > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D > (0x2800), apic 3 int 18, address bc:ae:c5:89:c4:c6 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 3 int 22, > AHCI 1.1 > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 2 lun 0: <ATA, MAXTOR STM325031, 4.AA> SCSI3 0/direct > fixed t10.ATA_MAXTOR_STM3250310AS_6RYEZGCY > sd0: 238475MB, 512 bytes/sector, 488397168 sectors > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 3 int 16, > version 1.0, legacy support > ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 3 int 16, > version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 3 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 3 int 18, > version 1.0, legacy support > ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 3 int 18, > version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 3 int 19 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI > iic0 at piixpm0 > iic0: addr 0x20 01=10 02=1d 03=2c 04=00 05=00 06=00 07=00 08=00 09=00 0a=10 > 0b=10 0c=10 0d=10 0e=14 0f=90 10=00 11=00 12=00 13=00 14=00 15=0e 16=28 17=9e > 18=c0 19=fb 1a=b1 1b=a6 1c=b7 1d=80 1e=0c 1f=01 20=09 21=09 22=09 23=09 24=43 > 3e=c7 words 00=ff10 01=101d 02=1d2c 03=2c00 04=0000 05=0000 06=0000 07=0000 > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 > pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 > configured to compatibility, channel 1 configured to compatibility > azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 3 int 16 > azalia1: codecs: VIA/0x0397 > audio0 at azalia1 > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00 > ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 > pci3 at ppb2 bus 3 > ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 3 int 18, > version 1.0, legacy support > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 > km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 > usb2 at ohci0: USB revision 1.0 > uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci1: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci2: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci3: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x2e/2: IT8712F rev 8, EC port 0x290 > usb6 at ohci4: USB revision 1.0 > uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > mtrr: Pentium Pro MTRR support > uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB Receiver" > rev 1.10/46.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 8 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhidev1 at uhub3 port 1 configuration 1 interface 1 "Logitech USB Receiver" > rev 1.10/46.00 addr 2 > uhidev1: iclass 3/0, 16 report ids > uhid0 at uhidev1 reportid 16: input=6, output=6, feature=0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on sd0a (fb489f7b7bbab88e.a) swap on sd0b dump on sd0b > sd1 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed > sd1: 237193MB, 512 bytes/sector, 485772942 sectors > > > > thanks > . > Your audio is being picked up already as 6670, audio was added together with the video for a 6670 card. There maybe a range of cards that use the same id for audio.
To recreate the includes. cd /usr/src/sys/dev/pci make Now follow instructions for building a kernel, and Installing kernel Reboot and check dmesg. This will not fix your driver problems, for that there needs to be KMS support, or try and hope one of the other chip families works.
