Hello,
I've got an old notebook too (Toshiba 4000CDS) and my PCMCIA is a bit
strange too. During floppy installation, it's detected and mounted on
ne0, whereas normal execution, it's mounted as ne3. It's not hard to
fix the network configuration to handle this, but it make me think
that this driver is not very "clean"... I use a Sitecom PCMCIA 10/100
Ethernet adapter.
Best regards,
Bruno.
On 11/13/05, Peter Huncar <[EMAIL PROTECTED]> wrote:
> Hello
>
> I have an old notebook: Compaq Armada 100s and I was tryig to install OpenBSD
> to
> use it as a neat diag. computer. After being unable to use the PCMCIA D-link
> DFE-670tdx ethernet adapter a while ago (after 3.7 release) I tried two linux
> distros (ubuntu and slackware) both working fine (and the PCMCIA card worked),
> actualy there was win98 before and worked fine also.
>
> After releasing of 3.8 I tried OpenBSD again without success, but I played a
> bit
> longer with.
>
> When booting from floppy there is a 70% chance that the kernel recognizes the
> PCMCIA card (ne3) but after trying to use it I got device timeout.
>
> I tried more than 10 times 3.8 bsd.rd without kernel being able to even
> recognize the card. After installing the system from CD without initializing
> the network, the default generic kernel has the same problem, I tried it many
> times. Seems like (tried generic and rd approx 30times together) only the
> floppy install kernel has a chance to recognize the pcmcia card, or maybe I am
> wrong, and it's a hardware issue. Anyway as I mentioned above ubuntu for
> example (3 tries ;o) )
> has no problem with this combination.
>
> I linked two dmesg outputs one from generic kernel boot and the another with
> the
> floppy boot with the card recognized.
>
> Is there a way to make this work?
>
> Thank you all, great job.
>
> Peter Huncar
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
> OpenBSD 3.8 (RAMDISK) #793: Sat Sep 10 16:02:31 MDT 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK
> cpu0: AMD-K6(tm)-III Processor ("AuthenticAMD" 586-class) 534 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
> real mem = 58236928 (56872K)
> avail mem = 48136192 (47008K)
> using 736 buffers containing 3014656 bytes (2944K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(f0) BIOS, date 01/28/00, BIOS32 rev. 0 @ 0xeb650
> apm0 at bios0: Power Management spec V1.2
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xe8000/0x67d
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/80 (3 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xc000! 0xcc000/0x1000 0xe4000/0xc00!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "VIA VT8501" rev 0x04
> ppb0 at pci0 dev 1 function 0 "VIA VT8501 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "Trident CyberBlade i7 AGP" rev 0x5d
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x22
> pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <IBM-DJSA-205>
> wd0: 16-sector PIO, LBA, 4769MB, 9767520 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.5A> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> "VIA VT83C572 USB" rev 0x10 at pci0 dev 7 function 2 not configured
> "VIA VT82C686 SMBus" rev 0x30 at pci0 dev 7 function 4 not configured
> "VIA VT82C686 AC97" rev 0x20 at pci0 dev 7 function 5 not configured
> "VIA VT82C686 Modem" rev 0x20 at pci0 dev 7 function 6 not configured
> "Texas Instruments PCI1211 CardBus" rev 0x00 at pci0 dev 10 function 0 not
> configured
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
> pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
> pcmcia0 at pcic0 controller 0 socket 0
> ne3 at pcmcia0 function 0 "D-Link, DFE-670TXD, PC Card" port 0x340/32, irq 11
> ne3: address 00:11:95:23:6d:99
> nsphyter0 at ne3 phy 1: DP83815 10/100 PHY, rev. 0
> pcmcia1 at pcic0 controller 0 socket 1
> pcic0: irq 9, polling enabled
> biomask f5e5 netmask fde5 ttymask ffe7
> rd0: fixed, 3800 blocks
> dkcsum: wd0 matches BIOS drive 0x80
> root on rd0a
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
> OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD-K6(tm)-III Processor ("AuthenticAMD" 586-class) 534 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
> real mem = 58236928 (56872K)
> avail mem = 45486080 (44420K)
> using 736 buffers containing 3014656 bytes (2944K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(f0) BIOS, date 01/28/00, BIOS32 rev. 0 @ 0xeb650
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 99%
> apm0: AC on, battery charge unknown, charging, estimated 0:02 hours
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xe8000/0x67d
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/80 (3 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xc000! 0xcc000/0x1000 0xe4000/0xc00!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "VIA VT8501" rev 0x04
> ppb0 at pci0 dev 1 function 0 "VIA VT8501 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "Trident CyberBlade i7 AGP" rev 0x5d
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x22
> pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <IBM-DJSA-205>
> wd0: 16-sector PIO, LBA, 4769MB, 9767520 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.5A> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 10
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x30: HWM disabled
> auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97" rev 0x20: irq 5
> ac97: codec id 0x43525934 (Cirrus Logic CS4299 rev 4)
> ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
> audio0 at auvia0
> "VIA VT82C686 Modem" rev 0x20 at pci0 dev 7 function 6 not configured
> cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1211 CardBus" rev 0x00:
> irq 10
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
> pcmcia0 at cardslot0
> biomask ef45 netmask ef45 ttymask ffc7
> pctr: user-level cycle counter enabled
> mtrr: K6-family MTRR support (2 registers)
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
