On Tue, 4 Dec 2012, Dave Anderson wrote:
Problem solved; PEBCAK. I didn't fully understand what 'cvs update' was
doing, and managed to create a source tree containing a mixture of old
and current files.
Apologies for the noise.
Dave
>I recently upgraded to the 2 December 2012 amd64 snapshot, then at about
>11am EST today (4 December) updated my source tree to -current. After
>compiling and installing a new kernel and rebooting, my attempt to
>rebuild userland aborted with a slew of errors in
>/usr/src/usr.sbin/smtpd/smtpd/../dns.c. In case this was a short-term
>glitch I re-updated my source tree at about 4pm EST and tried again,
>with the same result.
>
>Is this a known problem, or have I managed to screw something up?
>
>I'm using the same build procedure as I've successfully used before, and
>didn't see anything in the current version of the 'building from source'
>section of the FAQ that would require changing it or see anything
>relevant in 'following current'.
>
>The sequence of commands I used is:
>
> cd /usr/src && cvs -z 9 -d$CVSROOT -q up -Pd
>
> cd /usr/src/sys/arch/`machine`/conf && config GENERIC.MP && cd
> ../compile/GENERIC.MP
> make clean && make
> make install
> reboot
>
> cd /usr/obj && touch junk && mkdir -p .old && mv * .old && rm -rf .old &
> cd /usr/src && make obj && cd /usr/src/etc && env DESTDIR=/ make distrib-dirs
> cd /usr/src && make build
>
>Thanks for any help,
>
> Dave
--
Dave Anderson
<[email protected]>
