Sorry for the noise. I think I'v found the problem. On 1 jan 2013, at 23:54, mxb <[email protected]> wrote:
> > I just was able to reproduce this with up to date kernel. > > On 1 jan 2013, at 19:11, mxb <[email protected]> wrote: > >> >> Hi misc@, >> >> I'v got yet another panic. >> This time, after applying Martin Pelikans' diff, catched a pointer. >> However, machine never drops to ddb, even sysctl.conf says it should. >> >> panic: mxt_enter: locking against myself, 0xffffffff80a2d540 >> kernel: privileged instruction fault trap, code=0 >> kernel: double fault trap, code=0 >> >> I was able to reproduce this several times and whenever I wanted it. >> >> Here is scenario(or setup) then I was able to trigger: >> Two networks with OSPF-routing on top of GRE on top of IPSec. >> Client on network1 starts scp-download from a firewall(fw1) on network2. fw1 >> acts as a VPN/OSPF/GRE end-point for network2. >> After some time(1min or so) fw1 goes down with panic above. >> Basically I tried to scp down kernel from this machine. >> >> However, fw1 never goes down then I "scp up" from an Internal network behind >> fw1. >> I my case this was a patched kernel with Martins' diff from a VM-machine >> sitting behind fw1. >> >> This machine is not so current snapshot. >> Dmesg below: >> >> OpenBSD 5.2-current (GENERIC.MP) #12: Tue Jan 1 18:01:54 CET 2013 >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 4284039168 (4085MB) >> avail mem = 4147494912 (3955MB) >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeadc0 (105 entries) >> bios0: vendor American Megatrends Inc. version "4.6.4" date 06/30/2011 >> bios0: Supermicro X9SCL/X9SCM >> acpi0 at bios0: rev 2 >> acpi0: sleep states S0 S1 S4 S5 >> acpi0: tables DSDT FACP APIC SSDT MCFG HPET SPMI EINJ ERST HEST BERT >> acpi0: wakeup devices PS2K(S1) PS2M(S1) UAR1(S4) UAR2(S4) BR20(S1) EUSB(S4) >> USBE(S4) PEX0(S4) PEX4(S4) PEX6(S4) GBE_(S4) P0P1(S4) P0P2(S4) P0P3(S4) >> P0P4(S4) SLPB(S0) PWRB(S4) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: Intel(R) Xeon(R) CPU E31220L @ 2.20GHz, 2195.34 MHz >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC >> cpu0: 256KB 64b/line 8-way L2 cache >> cpu0: apic clock running at 99MHz >> cpu1 at mainbus0: apid 2 (application processor) >> cpu1: Intel(R) Xeon(R) CPU E31220L @ 2.20GHz, 2195.02 MHz >> cpu1: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC >> cpu1: 256KB 64b/line 8-way L2 cache >> cpu2 at mainbus0: apid 1 (application processor) >> cpu2: Intel(R) Xeon(R) CPU E31220L @ 2.20GHz, 2195.02 MHz >> cpu2: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC >> cpu2: 256KB 64b/line 8-way L2 cache >> cpu3 at mainbus0: apid 3 (application processor) >> cpu3: Intel(R) Xeon(R) CPU E31220L @ 2.20GHz, 2195.02 MHz >> cpu3: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC >> cpu3: 256KB 64b/line 8-way L2 cache >> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >> acpihpet0 at acpi0: 14318179 Hz >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 7 (BR20) >> acpiprt2 at acpi0: bus 5 (PEX0) >> acpiprt3 at acpi0: bus 6 (PEX4) >> acpiprt4 at acpi0: bus -1 (PEX6) >> acpiprt5 at acpi0: bus 1 (P0P1) >> acpiprt6 at acpi0: bus 2 (P0P2) >> acpiprt7 at acpi0: bus -1 (P0P3) >> acpiprt8 at acpi0: bus -1 (P0P4) >> acpicpu0 at acpi0: C3, C1, PSS >> acpicpu1 at acpi0: C3, C1, PSS >> acpicpu2 at acpi0: C3, C1, PSS >> acpicpu3 at acpi0: C3, C1, PSS >> acpibtn0 at acpi0: SLPB >> acpibtn1 at acpi0: PWRB >> ipmi at mainbus0 not configured >> cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2201, 2200, 2100, 2000, 1900, >> 1800, 1700, 1600 MHz >> pci0 at mainbus0 bus 0 >> pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 Host" rev 0x09 >> ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi >> pci1 at ppb0 bus 1 >> ppb1 at pci0 dev 1 function 1 "Intel Core 2G PCIE" rev 0x09: msi >> pci2 at ppb1 bus 2 >> ppb2 at pci2 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 >> pci3 at ppb2 bus 3 >> bnx0 at pci3 dev 4 function 0 "Broadcom BCM5706" rev 0x02: apic 0 int 17 >> ppb3 at pci2 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 >> pci4 at ppb3 bus 4 >> bnx1 at pci4 dev 5 function 0 "Broadcom BCM5706" rev 0x02: apic 0 int 18 >> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x05: msi, address >> 00:25:90:27:da:85 >> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int 16 >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb4 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi >> pci5 at ppb4 bus 5 >> ppb5 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb5: msi >> pci6 at ppb5 bus 6 >> em1 at pci6 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi, >> address 00:25:90:27:da:84 >> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int 23 >> usb1 at ehci1: USB revision 2.0 >> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5 >> pci7 at ppb6 bus 7 >> vga1 at pci7 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> pcib0 at pci0 dev 31 function 0 "Intel C204 LPC" rev 0x05 >> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3 >> scsibus0 at ahci0: 32 targets >> sd0 at scsibus0 targ 0 lun 0: <ATA, INTEL SSDSA2CT04, 4PC1> SCSI3 0/direct >> fixed naa.500151795956a9d6 >> sd0: 38166MB, 512 bytes/sector, 78165360 sectors, thin >> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 >> int 18 >> iic0 at ichiic0 >> sdtemp0 at iic0 addr 0x19: se97 >> sdtemp1 at iic0 addr 0x1b: se97 >> spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor >> spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor >> isa0 at pcib0 >> isadma0 at isa0 >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pcppi0 at isa0 port 0x61 >> spkr0 at pcppi0 >> wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33 >> lm1 at wbsio0 port 0xa30/8: NCT6776F >> mtrr: Pentium Pro MTRR support >> uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 >> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Winbond Electronics >> Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr 3 >> uhidev0: iclass 3/1 >> ums0 at uhidev0: 3 buttons, Z dir >> wsmouse0 at ums0 mux 0 >> uhidev1 at uhub2 port 2 configuration 1 interface 1 "Winbond Electronics >> Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr 3 >> uhidev1: iclass 3/1 >> ukbd0 at uhidev1: 8 variable keys, 6 key codes >> wskbd1 at ukbd0 mux 1 >> wskbd1: connecting to wsdisplay0 >> uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 >> vscsi0 at root >> scsibus1 at vscsi0: 256 targets >> softraid0 at root >> scsibus2 at softraid0: 256 targets >> root on sd0a (48824925dcb6ebdf.a) swap on sd0b dump on sd0b >> WARNING: / was not properly unmounted >> bnx0: address 00:14:c2:5d:31:a8 >> brgphy0 at bnx0 phy 1: BCM5706 10/100/1000baseT/SX PHY, rev. 2 >> bnx1: address 00:14:c2:5d:31:aa >> brgphy1 at bnx1 phy 1: BCM5706 10/100/1000baseT/SX PHY, rev. 2 >> carp: carp1 demoted group carp by 1 to 129 (carpdev) >> carp: carp2 demoted group carp by 1 to 130 (carpdev) >> carp: carp3 demoted group carp by 1 to 131 (carpdev) >> carp: carp4 demoted group carp by 1 to 132 (carpdev) >> carp: pfsync0 demoted group carp by 32 to 164 (pfsync init) >> carp: pfsync0 demoted group pfsync by 32 to 32 (pfsync init) >> carp: pfsync0 demoted group carp by 1 to 165 (pfsync bulk start) >> carp: pfsync0 demoted group pfsync by 1 to 33 (pfsync bulk start) >> carp: carp2 demoted group carp by -1 to 164 (carpdev) >> carp: carp3 demoted group carp by -1 to 163 (carpdev) >> carp: carp4 demoted group carp by -1 to 162 (carpdev) >> carp: carp1 demoted group carp by -1 to 161 (carpdev) >> carp2: state transition: BACKUP -> MASTER >> carp3: state transition: BACKUP -> MASTER >> carp4: state transition: BACKUP -> MASTER >> carp1: state transition: BACKUP -> MASTER >> carp2: state transition: MASTER -> BACKUP >> carp3: state transition: MASTER -> BACKUP >> carp4: state transition: MASTER -> BACKUP >> carp1: state transition: MASTER -> BACKUP >> carp: pfsync0 demoted group carp by -1 to 33 (pfsync bulk done) >> carp: pfsync0 demoted group pfsync by -1 to 32 (pfsync bulk done) >> carp: pfsync0 demoted group carp by -32 to 1 (pfsync init) >> carp: pfsync0 demoted group pfsync by -32 to 0 (pfsync init) >> carp2: state transition: BACKUP -> MASTER >> carp3: state transition: BACKUP -> MASTER >> carp4: state transition: BACKUP -> MASTER >> carp1: state transition: BACKUP -> MASTER
