I am trying to install 3.8 on a Sun Fire V100 I had laying around. I
am not real familiar with running OBSD on Sun but have never had an
issue on i386. I burned the cd38.iso image to a CD and the system
boots but it hangs at "rd0: fixed, 6144 blocks" and never starts the
installation.
Any ideas on what I am doing wrong?
Thanks,
Eric
ok boot cdrom
Boot device: /[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:f File
and args:
OpenBSD IEEE 1275 Bootblock 1.1
..>> OpenBSD 3.8 (obj) #1: Thu Sep 1 17:32:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/stand/ofwboot/obj
: trying bsd...
Booting /[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:f/bsd
[EMAIL PROTECTED]@[EMAIL PROTECTED]
symbols @ 0xfff34200 42 start=0x1000000
console is /[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL PROTECTED],3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.8 (RAMDISK) #459: Sat Sep 10 16:41:34 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/RAMDISK
total memory = 536870912
avail memory = 481361920
using 3276 buffers containing 26836992 bytes of memory
bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0:f
mainbus0 (root): Sun Fire V100 (UltraSPARC-IIe 548MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 548 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 512K external (64 b/
l)
psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0
DVMA map: 60000000 to 80000000
IOTDB: 8269e000 to 8271e000
pci0 at psycho0
ebus0 at pci0 dev 7 function 0 vendor 0x10b9 product 0x1533 rev 0x00
dma at ebus0 addr 0-ffff ipl 42 not configured
rtc0 at ebus0 addr 70-71: m5819
power at ebus0 addr 2000-2007 ipl 35 not configured
SUNW,lomh at ebus0 addr 8010-8011 ipl 42 not configured
com0 at ebus0 addr 3f8-3ff ipl 43: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 43: ns16550a, 16 byte fifo
flashprom at ebus0 addr 0-7ffff not configured
vendor 0x10b9 product 0x7101 (class prehistoric subclass miscellaneous, rev 0x00
) at pci0 dev 3 function 0 not configured
vendor 0x10b9 product 0x7101 (class prehistoric subclass miscellaneous, rev 0x00
) at pci0 dev 3 function 0 not configured
dc0 at pci0 dev 12 function 0 vendor 0x1282 product 0x9102 rev 0x31: ivec 3006,
address 00:03:ba:1f:89:91
amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 0
dc1 at pci0 dev 5 function 0 vendor 0x1282 product 0x9102 rev 0x31: ivec 301c, a
ddress 00:03:ba:1f:89:92
amphy1 at dc1 phy 1: DM9102 10/100 PHY, rev. 0
ohci0 at pci0 dev 10 function 0 vendor 0x10b9 product 0x5237 rev 0x03: ivec 24,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x10b9 OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pciide0 at pci0 dev 13 function 0 vendor 0x10b9 product 0x5229 rev 0xc3: DMA, ch
annel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 180c for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <ST340016A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CD-ROM SR244W, T01A> SCSI0 5/cdrom remov
able
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pcons at mainbus0 not configured
No counter-timer -- using %tick at 548MHz as system clock.
rd0: fixed, 6144 blocks
