On 05/01/2013 03:18, Jonathan Gray wrote:
You aren't compiling i830_dp.c, it needs to be added to src/Makefile.am
and then follow the instructions in /usr/xenocara/README in the
'Regenerating configure scripts' section.
Thanks for the tip, amended src/Makefile.am.
Installed a new driver & now I just get a blank screen, killing xinit &
xorg via ssh does not return the system back to console.
[ 321.808] (--) checkDevMem: using aperture driver /dev/xf86
[ 321.828] (--) Using wscons driver on /dev/ttyC4 in pcvt
compatibility mode (version 3.32)
[ 321.840]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 321.840] X Protocol Version 11, Revision 0
[ 321.840] Build Operating System: OpenBSD 5.2 amd64
[ 321.840] Current Operating System: OpenBSD foo 5.2 GENERIC.MP#0 amd64
[ 321.840] Build Date: 04 December 2012 12:53:54PM
[ 321.840]
[ 321.840] Current version of pixman: 0.28.0
[ 321.840] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 321.840] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 321.840] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 5
12:49:42 2013
[ 321.842] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 321.843] (==) No Layout section. Using the first Screen section.
[ 321.843] (==) No screen section available. Using defaults.
[ 321.843] (**) |-->Screen "Default Screen Section" (0)
[ 321.843] (**) | |-->Monitor "<default monitor>"
[ 321.843] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 321.843] (==) Disabling SIGIO handlers for input devices
[ 321.843] (==) Automatically adding devices
[ 321.843] (==) Automatically enabling devices
[ 321.848] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 321.848] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 321.848] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 321.848] (II) Loader magic: 0x3c0482b53e0
[ 321.848] (II) Module ABI versions:
[ 321.848] X.Org ANSI C Emulation: 0.4
[ 321.848] X.Org Video Driver: 12.0
[ 321.848] X.Org XInput driver : 16.0
[ 321.848] X.Org Server Extension : 6.0
[ 321.849] (--) PCI:*(0:0:2:0) 8086:0166:106b:00ea rev 9, Mem @
0xa0000000/4194304, 0x90000000/268435456, I/O @ 0x00002000/64
[ 321.849] (II) LoadModule: "extmod"
[ 321.851] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[ 321.852] (II) Module extmod: vendor="X.Org Foundation"
[ 321.852] compiled for 1.12.3, module version = 1.0.0
[ 321.852] Module class: X.Org Server Extension
[ 321.852] ABI class: X.Org Server Extension, version 6.0
[ 321.852] (II) Loading extension MIT-SCREEN-SAVER
[ 321.852] (II) Loading extension XFree86-VidModeExtension
[ 321.852] (II) Loading extension XFree86-DGA
[ 321.852] (II) Loading extension DPMS
[ 321.852] (II) Loading extension XVideo
[ 321.852] (II) Loading extension XVideo-MotionCompensation
[ 321.852] (II) Loading extension X-Resource
[ 321.852] (II) LoadModule: "dbe"
[ 321.853] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[ 321.853] (II) Module dbe: vendor="X.Org Foundation"
[ 321.853] compiled for 1.12.3, module version = 1.0.0
[ 321.853] Module class: X.Org Server Extension
[ 321.853] ABI class: X.Org Server Extension, version 6.0
[ 321.853] (II) Loading extension DOUBLE-BUFFER
[ 321.853] (II) LoadModule: "glx"
[ 321.854] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 321.855] (II) Module glx: vendor="X.Org Foundation"
[ 321.855] compiled for 1.12.3, module version = 1.0.0
[ 321.855] ABI class: X.Org Server Extension, version 6.0
[ 321.856] (==) AIGLX enabled
[ 321.856] (II) Loading extension GLX
[ 321.856] (II) LoadModule: "record"
[ 321.856] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[ 321.857] (II) Module record: vendor="X.Org Foundation"
[ 321.857] compiled for 1.12.3, module version = 1.13.0
[ 321.857] Module class: X.Org Server Extension
[ 321.857] ABI class: X.Org Server Extension, version 6.0
[ 321.857] (II) Loading extension RECORD
[ 321.857] (II) LoadModule: "dri"
[ 321.857] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[ 321.858] (II) Module dri: vendor="X.Org Foundation"
[ 321.858] compiled for 1.12.3, module version = 1.0.0
[ 321.858] ABI class: X.Org Server Extension, version 6.0
[ 321.859] (II) Loading extension XFree86-DRI
[ 321.859] (II) LoadModule: "dri2"
[ 321.859] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 321.860] (II) Module dri2: vendor="X.Org Foundation"
[ 321.860] compiled for 1.12.3, module version = 1.2.0
[ 321.860] ABI class: X.Org Server Extension, version 6.0
[ 321.860] (II) Loading extension DRI2
[ 321.860] (==) Matched intel as autoconfigured driver 0
[ 321.860] (==) Matched vesa as autoconfigured driver 1
[ 321.860] (==) Assigned the driver to the xf86ConfigLayout
[ 321.860] (II) LoadModule: "intel"
[ 321.860] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 321.863] (II) Module intel: vendor="X.Org Foundation"
[ 321.863] compiled for 1.12.3, module version = 2.12.0
[ 321.863] Module class: X.Org Video Driver
[ 321.863] ABI class: X.Org Video Driver, version 12.0
[ 321.863] (II) LoadModule: "vesa"
[ 321.864] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 321.864] (II) Module vesa: vendor="X.Org Foundation"
[ 321.864] compiled for 1.12.3, module version = 2.3.2
[ 321.864] Module class: X.Org Video Driver
[ 321.864] ABI class: X.Org Video Driver, version 12.0
[ 321.864] (II) intel: Driver for Intel Integrated Graphics Chipsets:
i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2),
Ivybridge Server (GT1), Ivybridge Server (GT2)
[ 321.865] (II) VESA: driver for VESA chipsets: vesa
[ 321.865] (WW) Falling back to old probe method for vesa
[ 321.865] (II) Loading sub module "vgahw"
[ 321.865] (II) LoadModule: "vgahw"
[ 321.867] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[ 321.867] (II) Module vgahw: vendor="X.Org Foundation"
[ 321.867] compiled for 1.12.3, module version = 0.1.0
[ 321.867] ABI class: X.Org Video Driver, version 12.0
[ 321.867] (II) Loading sub module "ramdac"
[ 321.867] (II) LoadModule: "ramdac"
[ 321.867] (II) Module "ramdac" already built-in
[ 321.867] drmOpenDevice: node name is /dev/drm0
[ 321.867] drmOpenDevice: open result is 10, (OK)
[ 321.868] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 321.868] drmOpenDevice: node name is /dev/drm0
[ 321.868] drmOpenDevice: open result is 10, (OK)
[ 321.868] drmOpenByBusid: drmOpenMinor returns 10
[ 321.868] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 321.868] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 321.868] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 321.868] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 321.868] (==) intel(0): RGB weight 888
[ 321.868] (==) intel(0): Default visual is TrueColor
[ 321.868] (II) intel(0): Integrated Graphics Chipset: Intel(R)
Ivybridge Mobile (GT2)
[ 321.868] (--) intel(0): Chipset: "Ivybridge Mobile (GT2)"
[ 321.868] (--) intel(0): Linear framebuffer at 0x90000000
[ 321.868] (--) intel(0): IO registers at addr 0xA0000000 size 4194304
[ 321.868] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 321.868] (II) intel(0): No SDVO device is found in VBT
[ 321.869] (II) intel(0): 2 display pipes available.
[ 321.869] (II) Loading sub module "ddc"
[ 321.869] (II) LoadModule: "ddc"
[ 321.869] (II) Module "ddc" already built-in
[ 321.869] (II) Loading sub module "i2c"
[ 321.869] (II) LoadModule: "i2c"
[ 321.869] (II) Module "i2c" already built-in
[ 321.870] (II) intel(0): Output VGA has no monitor section
[ 321.870] (II) intel(0): Output eDP has no monitor section
[ 321.870] (II) intel(0): I2C bus "DPDDC-A" initialized.
[ 321.925] (II) intel(0): eDP output detected
[ 321.925] (II) intel(0): Output HDMI-3 has no monitor section
[ 321.925] (II) intel(0): I2C bus "HDMIB" initialized.
[ 321.925] (II) intel(0): HDMI-3 output detected
[ 321.925] (II) intel(0): Output DP-B has no monitor section
[ 321.925] (II) intel(0): I2C bus "DPDDC-B" initialized.
[ 321.965] (II) intel(0): DP-B output detected
[ 321.965] (II) intel(0): Output HDMI-4 has no monitor section
[ 321.965] (II) intel(0): I2C bus "HDMIC" initialized.
[ 321.965] (II) intel(0): HDMI-4 output detected
[ 321.965] (II) intel(0): Output DP-C has no monitor section
[ 321.965] (II) intel(0): I2C bus "DPDDC-C" initialized.
[ 322.005] (II) intel(0): DP-C output detected
[ 322.045] (II) intel(0): EDID for output VGA
[ 322.045] (II) intel(0): I2C device "DPDDC-A:ddc2" registered at
address 0xA0.
[ 322.085] (II) intel(0): I2C device "DPDDC-A:E-EDID segment register"
registered at address 0x60.
[ 324.805] (II) intel(0): EDID for output eDP
[ 324.805] (II) intel(0): Manufacturer: APP Model: 9cdf Serial#: 0
[ 324.805] (II) intel(0): Year: 2011 Week: 26
[ 324.805] (II) intel(0): EDID Version: 1.4
[ 324.805] (II) intel(0): Digital Display Input
[ 324.805] (II) intel(0): 6 bits per channel
[ 324.805] (II) intel(0): Digital interface is DisplayPort
[ 324.805] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 18
[ 324.805] (II) intel(0): Gamma: 2.20
[ 324.805] (II) intel(0): No DPMS capabilities specified
[ 324.805] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 324.805] (II) intel(0): First detailed timing is preferred mode
[ 324.805] (II) intel(0): Preferred mode is native pixel format and
refresh rate
[ 324.805] (II) intel(0): redX: 0.593 redY: 0.342 greenX: 0.331
greenY: 0.573
[ 324.805] (II) intel(0): blueX: 0.152 blueY: 0.133 whiteX: 0.313
whiteY: 0.329
[ 324.805] (II) intel(0): Manufacturer's mask: 0
[ 324.805] (II) intel(0): Supported detailed timing:
[ 324.805] (II) intel(0): clock: 91.5 MHz Image Size: 286 x 179 mm
[ 324.805] (II) intel(0): h_active: 1440 h_sync: 1504 h_sync_end
1546 h_blank_end 1652 h_border: 0
[ 324.805] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909
v_blanking: 926 v_border: 0
[ 324.805] (II) intel(0): LP133WP1-TJA5
[ 324.805] (II) intel(0): Monitor name: Color LCD
[ 324.805] (II) intel(0): EDID (in hex):
[ 324.805] (II) intel(0): 00ffffffffffff000610df9c00000000
[ 324.805] (II) intel(0): 1a150104951d127802ef059757549227
[ 324.805] (II) intel(0): 22505400000001010101010101010101
[ 324.805] (II) intel(0): 010101010101c223a0d450841a30402a
[ 324.805] (II) intel(0): 36001eb3100000180000001000000000
[ 324.805] (II) intel(0): 00000000000000000000000000fe004c
[ 324.805] (II) intel(0): 503133335750312d544a4135000000fc
[ 324.805] (II) intel(0): 00436f6c6f72204c43440a202020007c
[ 324.805] (II) intel(0): EDID vendor "APP", prod id 40159
[ 324.805] (II) intel(0): Printing probed modes for output eDP
[ 324.805] (II) intel(0): Modeline "1440x900"x59.8 91.54 1440 1504
1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 324.805] (II) intel(0): I2C device "HDMIB:ddc2" registered at
address 0xA0.
[ 324.809] (II) intel(0): EDID for output HDMI-3
[ 324.809] (II) intel(0): EDID for output HDMI-3
[ 324.825] (II) intel(0): EDID for output DP-B
[ 324.825] (II) intel(0): I2C device "HDMIC:ddc2" registered at
address 0xA0.
[ 324.828] (II) intel(0): EDID for output HDMI-4
[ 324.828] (II) intel(0): EDID for output HDMI-4
[ 324.845] (II) intel(0): EDID for output DP-C
[ 324.845] (II) intel(0): Output VGA disconnected
[ 324.845] (II) intel(0): Output eDP connected
[ 324.845] (II) intel(0): Output HDMI-3 disconnected
[ 324.845] (II) intel(0): Output DP-B disconnected
[ 324.845] (II) intel(0): Output HDMI-4 disconnected
[ 324.845] (II) intel(0): Output DP-C disconnected
[ 324.845] (II) intel(0): Using exact sizes for initial modes
[ 324.845] (II) intel(0): Output eDP using initial mode 1440x900
[ 324.845] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[ 324.947] (II) intel(0): detected 512 kB GTT.
[ 324.947] (II) intel(0): detected 65532 kB stolen memory.
[ 324.947] (==) intel(0): video overlay key set to 0x101fe
[ 324.947] (==) intel(0): DPI set to (96, 96)
[ 324.947] (II) Loading sub module "fb"
[ 324.947] (II) LoadModule: "fb"
[ 324.948] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 324.951] (II) Module fb: vendor="X.Org Foundation"
[ 324.951] compiled for 1.12.3, module version = 1.0.0
[ 324.951] ABI class: X.Org ANSI C Emulation, version 0.4
[ 324.951] (II) Loading sub module "int10"
[ 324.951] (II) LoadModule: "int10"
[ 324.952] (II) Loading /usr/X11R6/lib/modules/libint10.so
[ 324.953] (II) Module int10: vendor="X.Org Foundation"
[ 324.953] compiled for 1.12.3, module version = 1.0.0
[ 324.953] ABI class: X.Org Video Driver, version 12.0
[ 324.954] (II) intel(0): Primary V_BIOS segment is: 0xc000
[ 324.954] (--) intel(0): Console VGA mode is 0x3
[ 324.954] (II) UnloadModule: "vesa"
[ 324.954] (II) Unloading vesa
[ 324.955] (==) Depth 24 pixmap format is 32 bpp
[ 324.955] (II) intel(0): Kernel reported 1006592 total, 0 used
[ 324.955] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available
[ 324.955] (WW) intel(0): DRI disabled on Sandy Bridge chipsets
[ 324.955] (**) intel(0): Shadow buffer enabled, 2D GPU acceleration
disabled.
[ 324.955] (**) intel(0): Framebuffer tiled
[ 324.955] (**) intel(0): Pixmaps tiled
[ 324.955] (**) intel(0): 3D buffers tiled
[ 324.955] (**) intel(0): SwapBuffers wait enabled
[ 324.961] (==) intel(0): VideoRam: 262144 KB
[ 324.962] (II) intel(0): Allocated new frame buffer 1472x900 stride
6144, tiled
[ 324.966] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03b0
[ 324.967] (II) UXA(0): Driver registered support for the following
operations:
[ 324.967] (II) solid
[ 324.967] (II) copy
[ 324.967] (II) composite (RENDER acceleration)
[ 324.967] (II) put_image
[ 324.967] (II) get_image
[ 324.967] (==) intel(0): Backing store disabled
[ 324.967] (==) intel(0): Silken mouse disabled
[ 324.967] (II) intel(0): Initializing HW Cursor
[ 326.165] Plane disable
[ 326.205] Pipe disable
[ 327.385] aborting pipeconf disable early
[ 327.405] PFIT disable
[ 327.405] FDI TX disable
[ 327.405] FDI RX disable
[ 327.425] FDI TX train 1 preload
[ 327.425] FDI RX train 1 preload
[ 327.445] Transcoder disable
[ 327.465] PCH DPLL disable
[ 327.465] FDI RX PLL PCD disable
[ 327.465] FDI TX PLL disable 00020040
[ 327.485] FDI RX PLL disable 00040000
[ 327.505] DPMS off done
[ 327.525] Plane disable
[ 327.525] Pipe disable
[ 327.545] PFIT disable
[ 327.545] FDI TX disable
[ 327.545] FDI RX disable
[ 327.565] FDI TX train 1 preload
[ 327.565] FDI RX train 1 preload
[ 327.585] Transcoder disable
[ 327.605] PCH DPLL disable
[ 327.605] FDI RX PLL PCD disable
[ 327.605] FDI TX PLL disable 00000040
[ 327.625] FDI RX PLL disable 00040000
[ 327.645] DPMS off done
[ 327.719] (II) intel(0): Fixed memory allocation layout:
[ 327.720] (II) intel(0): 0x03fff000: end of stolen memory
[ 327.720] (II) intel(0): 0x03fff000-0x0fffffff: DRI memory manager
(196612 kB)
[ 327.720] (II) intel(0): 0x10000000: end of aperture
[ 327.720] (II) intel(0): BO memory allocation layout:
[ 327.720] (II) intel(0): 0x03fff000: start of memory manager
[ 327.720] (II) intel(0): 0x04652000-0x0465bfff: HW cursors (40 kB)
[ 327.720] (II) intel(0): 0x10000000: end of memory manager
[ 328.055] Plane disable
[ 328.055] Pipe disable
[ 328.075] PFIT disable
[ 328.075] FDI TX disable
[ 328.075] FDI RX disable
[ 328.095] FDI TX train 1 preload
[ 328.095] FDI RX train 1 preload
[ 328.115] Transcoder disable
[ 328.135] PCH DPLL disable
[ 328.135] FDI RX PLL PCD disable
[ 328.135] FDI TX PLL disable 00020040
[ 328.155] FDI RX PLL disable 00040000
[ 328.175] DPMS off done
[ 328.195] Plane disable
[ 328.195] Pipe disable
[ 328.215] PFIT disable
[ 328.215] FDI TX disable
[ 328.215] FDI RX disable
[ 328.235] FDI TX train 1 preload
[ 328.235] FDI RX train 1 preload
[ 328.255] Transcoder disable
[ 328.275] PCH DPLL disable
[ 328.275] FDI RX PLL PCD disable
[ 328.275] FDI TX PLL disable 00000040
[ 328.295] FDI RX PLL disable 00040000
[ 328.315] DPMS off done
[ 328.665] Plane disable
[ 328.665] Pipe disable
[ 328.685] PFIT disable
[ 328.685] FDI TX disable
[ 328.685] FDI RX disable
[ 328.705] FDI TX train 1 preload
[ 328.705] FDI RX train 1 preload
[ 328.725] Transcoder disable
[ 328.745] PCH DPLL disable
[ 328.745] FDI RX PLL PCD disable
[ 328.745] FDI TX PLL disable 00020040
[ 328.765] FDI RX PLL disable 00040000
[ 328.785] DPMS off done
[ 328.805] (WW) intel(0): Chosen PLL clock of 216.0 Mhz more than 2%
away from desired 270.0 Mhz
[ 328.805] bpp 6
[ 329.005] Pipe enable
[ 329.025] Plane enable
[ 329.045] LUT load
[ 329.045] DPMS on done
[ 330.235] Plane disable
[ 330.235] Pipe disable
[ 330.254] PFIT disable
[ 330.255] FDI TX disable
[ 330.255] FDI RX disable
[ 330.274] FDI TX train 1 preload
[ 330.275] FDI RX train 1 preload
[ 330.294] Transcoder disable
[ 330.314] PCH DPLL disable
[ 330.315] FDI RX PLL PCD disable
[ 330.315] FDI TX PLL disable 00000040
[ 330.334] FDI RX PLL disable 00040000
[ 330.354] DPMS off done
[ 330.374] (II) intel(0): Output configuration:
[ 330.473] (II) intel(0): Pipe A is on
[ 330.473] (II) intel(0): Display plane A is now enabled and
connected to pipe A.
[ 330.473] (II) intel(0): Pipe B is off
[ 330.473] (II) intel(0): Display plane B is now disabled and
connected to pipe B.
[ 330.473] (II) intel(0): Output VGA is connected to pipe none
[ 330.473] (II) intel(0): Output eDP is connected to pipe A
[ 330.473] (II) intel(0): Output HDMI-3 is connected to pipe none
[ 330.473] (II) intel(0): Output DP-B is connected to pipe none
[ 330.473] (II) intel(0): Output HDMI-4 is connected to pipe none
[ 330.473] (II) intel(0): Output DP-C is connected to pipe none
[ 330.473] (II) intel(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 330.478] (==) intel(0): DPMS enabled
[ 330.478] (==) intel(0): Intel XvMC decoder enabled
[ 330.478] (WW) intel(0): Disabling Xv because no adaptors could be
initialized.
[ 330.478] (II) intel(0): direct rendering: Failed
[ 330.478] (--) RandR disabled
[ 330.478] (II) Initializing built-in extension Generic Event Extension
[ 330.478] (II) Initializing built-in extension SHAPE
[ 330.478] (II) Initializing built-in extension MIT-SHM
[ 330.478] (II) Initializing built-in extension XInputExtension
[ 330.478] (II) Initializing built-in extension XTEST
[ 330.478] (II) Initializing built-in extension BIG-REQUESTS
[ 330.478] (II) Initializing built-in extension SYNC
[ 330.478] (II) Initializing built-in extension XKEYBOARD
[ 330.478] (II) Initializing built-in extension XC-MISC
[ 330.478] (II) Initializing built-in extension SECURITY
[ 330.478] (II) Initializing built-in extension XINERAMA
[ 330.479] (II) Initializing built-in extension XFIXES
[ 330.479] (II) Initializing built-in extension RENDER
[ 330.479] (II) Initializing built-in extension RANDR
[ 330.479] (II) Initializing built-in extension COMPOSITE
[ 330.479] (II) Initializing built-in extension DAMAGE
[ 330.495] (II) AIGLX: Screen 0 is not DRI2 capable
[ 330.495] (II) AIGLX: Screen 0 is not DRI capable
[ 330.495] (EE) AIGLX error: dlopen of
/usr/X11R6/lib/modules/dri/swrastg_dri.so failed (File not found)
[ 330.520] (II) AIGLX: Loaded and initialized swrast
[ 330.520] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 330.521] (II) intel(0): Setting screen physical size to 381 x 238
[ 330.670] (II) config/wscons: checking input device /dev/wskbd
[ 330.670] (II) wskbd: using layout us
[ 330.670] (II) wskbd: using variant dvorak
[ 330.670] (II) LoadModule: "kbd"
[ 330.671] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 330.671] (II) Module kbd: vendor="X.Org Foundation"
[ 330.671] compiled for 1.12.3, module version = 1.6.2
[ 330.671] Module class: X.Org XInput Driver
[ 330.671] ABI class: X.Org XInput driver, version 16.0
[ 330.671] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 330.671] (**) /dev/wskbd: always reports core events
[ 330.671] (**) /dev/wskbd: always reports core events
[ 330.672] (**) Option "Protocol" "standard"
[ 330.672] (**) Option "XkbRules" "base"
[ 330.672] (**) Option "XkbModel" "pc105"
[ 330.672] (**) Option "XkbLayout" "us"
[ 330.672] (**) Option "XkbVariant" "dvorak"
[ 330.672] (II) XINPUT: Adding extended input device "/dev/wskbd"
(type: KEYBOARD, id 6)
[ 330.707] (II) config/wscons: checking input device /dev/wsmouse
[ 330.707] (II) LoadModule: "ws"
[ 330.708] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 330.708] (II) Module ws: vendor="X.Org Foundation"
[ 330.708] compiled for 1.12.3, module version = 1.3.0
[ 330.708] Module class: X.Org XInput Driver
[ 330.708] ABI class: X.Org XInput driver, version 16.0
[ 330.708] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 330.708] (**) /dev/wsmouse: always reports core events
[ 330.708] (II) ws: /dev/wsmouse: debuglevel 0
[ 330.708] (**) Option "Device" "/dev/wsmouse"
[ 330.708] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 330.708] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 330.708] (**) ws: /dev/wsmouse: associated screen: 0
[ 330.709] (II) ws: /dev/wsmouse: minimum x position: 0
[ 330.709] (II) ws: /dev/wsmouse: maximum x position: 1439
[ 330.709] (II) ws: /dev/wsmouse: minimum y position: 0
[ 330.709] (II) ws: /dev/wsmouse: maximum y position: 899
[ 330.709] (==) ws: /dev/wsmouse: Buttons: 7
[ 330.710] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 330.710] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 7)
[ 330.710] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 330.710] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 330.710] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 330.710] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 330.744] Pipe enable
[ 330.745] Plane enable
[ 330.745] LUT load
[ 330.745] DPMS on done
[ 380.245] (II) UnloadModule: "kbd"
[ 380.246] (II) UnloadModule: "ws"
[ 380.282] Pipe enable
[ 380.282] Plane enable
[ 380.282] LUT load
[ 380.282] DPMS on done
[ 380.731] Server terminated successfully (0). Closing log file.
