Install works fine, but consistently stops after printing:
wskbd0 at pckbd0: console keyboard, using wsdisplay0
Same behavior for 5.2 release, current, amd64 and i386, and another
model nT-i2847. Any hints where to poke next?
dmesg from booting bsd.rd follows. Thanks.
Kent
OpenBSD 5.2-current (RAMDISK_CD) #14: Tue Jan 8 14:28:01 MST 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC
real mem = 2132189184 (2033MB)
avail mem = 2089598976 (1992MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/09/11, SMBIOS rev. 2.7 @
0x7f002010 (46 entries)
bios0: vendor American Megatrends Inc. version "4.6.5" date 03/14/2012
bios0: Foxconn nT-i1000 Series
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SSDT SSDT SSDT IFEU
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P8)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
bios0: ROM list: 0xc0000/0xf400! 0xcf800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0bf3 rev 0x03
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x0be2 rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
pci1 at ppb0 bus 1
vendor "Intel", unknown product 0x0890 (class network subclass
miscellaneous, rev 0xc4) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x07:
RTL8168E/8111E-VL (0x2c80), apic 4 int 17, address d0:27:88:d5:72:6e
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD1600BEVT-0, 01.0> SCSI3
0/direct fixed naa.50014ee657159cc7
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 6 configuration 1 interface 0 " CENTON USB" rev
2.00/11.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <CENTON, , 1100> SCSI2 0/direct
removable serial.090c1000000000002196
sd1: 30600MB, 512 bytes/sector, 62668800 sectors
umass1 at uhub0 port 7 configuration 1 interface 0 "Generic
USB2.0-CRW" rev 2.00/38.82 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
0/direct removable serial.0bda0138516388200000
uhub5 at uhub0 port 8 "vendor 0x105b product 0x0d7d" rev 2.00/77.64 addr 4
uhub6 at uhub3 port 1 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2
uhidev0 at uhub6 port 1 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/3.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub6 port 2 configuration 1 interface 0 "vendor 0x0461 USB
Optical Mouse" rev 2.00/2.00 addr 4
uhidev1: iclass 3/1
uhid at uhidev1 not configured
uhidev2 at uhub6 port 3 configuration 1 interface 0 "No brand 4 Port
KVMSwicther" rev 1.10/1.00 addr 5
uhidev2: iclass 3/0
ukbd1 at uhidev2
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub6 port 3 configuration 1 interface 1 "No brand 4 Port
KVMSwicther" rev 1.10/1.00 addr 5
uhidev3: no input interrupt endpoint
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
