Hi, After upgrade to 08.01.2013 snapshot, I get a lot of /bsd: arpresolve: XX.XX.XX.33: route without link local address
in /var/log/messages. XX.XX.XX.33 is my default gateway. [ns]~$ cat /etc/hostname.em0 up dhcp -inet6 [ns]~$ tail /var/log/messages ....... Jan 10 20:31:47 ns /bsd: arpresolve: 94.26.7.33: route without link local address Jan 10 20:31:47 ns /bsd: arpresolve: 94.26.7.33: route without link local address ....... Jan 10 20:36:47 ns /bsd: arpresolve: XX.XX.X.33: route without link local address Jan 10 20:36:47 ns last message repeated 7 times I can provide more info if it's needed. dmesg: OpenBSD 5.2-current (GENERIC) #14: Tue Jan 8 14:13:14 MST 2013 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon(TM) XP1600+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.42 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MMXX,3DNOW2,3DNOW real mem = 402112512 (383MB) avail mem = 384561152 (366MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 03/03/03, BIOS32 rev. 0 @ 0xf0d00, SMBIOS rev. 2.3 @ 0xf2bc0 (46 entries) bios0: vendor Award Software, Inc. version "ASUS A7V266-C ACPI BIOS Rev 1014" date 03/03/2003 bios0: ASUSTeK Computer INC. A7V266-C apm0 at bios0: Power Management spec V1.2 acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1572 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf14b0/192 (10 entries) pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C586 ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xcc000/0x1000 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00 viaagp0 at pchb0: v2 agp0 at viaagp0: aperture at 0xfe800000, size 0xe400000 ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci0 dev 12 function 0 "S3 ViRGE DX/GX" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) em0 at pci0 dev 13 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq 11, address 00:07:e9:10:32:a8 em1 at pci0 dev 15 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq 10, address 00:07:e9:10:2a:20 viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00: SMI iic0 at viapm0 lm1 at iic0 addr 0x2d: AS99127F viapm0: 24-bit timer at 3579545Hz pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 confi gured to compatibility wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00ETA0> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 12 uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 12 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root scsibus1 at softraid0: 256 targets root on wd0a swap on wd0b dump on wd0b