On 2013.03.01 22:07:41 -0500, Nick Holland wrote:
> On 03/01/13 19:16, Luis P. Mendes wrote:
> > First time, I rsynced some system directories to the second disk and
> > it worked quickly.
> > Now, I'm trying to rsync a big encrypted data partition to another
> > (almost same size) encrypted data partition in the second disk. And
> > speed is abysmal.
> ...
> > My system:
> > OpenBSD 5.2-current (GENERIC.MP) #107: Mon Nov 19 12:58:00 MST 2012
> > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel"
> > 686-class) 1.60 GHz
> >
> >
> > Why does this happen? What can I do to improve the crawling speed?
>
> quit using an anemic processor for real work?
>
> Atom = low power consumption for low performance processing.
> Crypto = high processor utilization per unit of data moved.
>
> Atom + lots of crypto = unhappy user
>
> Slow processor is often backed with slow supporting hw, too (i.e., disk IO)
>
> (Keep in mind...what does sufficient crypto at ISP link speeds is
> completely insufficient for what you probably want out of disk speeds.)
>
> 'course, since you SNIPPED YOUR DMESG, it could probably be a lot of
> other things too... (hint: if you are so sure you know the minimal
> amount of info we need to resolve your problem, you can undoubtedly
> solve your own problem)
I took the time to compare the performance of rsyncing files in
OpenBSD with Linux.
I have two very similar systems, using Atom N270 in a Intel board D945GSEJT.
The characteristics:
In Linux:
2 GB RAM
PATA disk of 160 GB connected via adaptor to 44pin motherboard
connector
In OpenBSD
1 GB RAM
2 SATA 2 disks - Samsung HD103UJ (F1) and HD103SJ (F3)
The system is running in unencrypted partitions in HD103UJ.
There's a big encrypted partition of data in each disk.
In Linux, I created a cryptsetup luks partition and rsync contents of
a directory (1.3GB) to another directory in the *same* partition of the
same disk.
It took 5m24 real time.
In OpenBSD, in the Spinpoint F1 disk, I did the same thing: rsynced a
directory in a crypto softraid partition, with the same data to
another one in the same disk:
It took 64m43s real time.
Then, in OpenBSD, I measured rsyncing the same directory (from the
crypto softraid partition in HD103UJ) to another crypto softraid
partition in HD103SJ - which is much faster at writing that HD103UJ).
It took 32m 26s real.
>From `top` in OpenBSD, I can see the processor remains between 19% and
10% idle at every iteration.
The point here is not that I expect OpenBSD crypto softraid to perform
as fast as cryptsetup + luks, it's just that I was not expecting that
the difference was of an order of magnitude slower, even with faster
disks.
As an additional information, The HD103UJ, where the system is
running, is being upgraded since version 5.0.
In dmesg, there's some output about invalid metadata format.
The dmesg output:
68" rev 0x03: RTL8168D/8111D (0x2800), apic 2 int 16, address e0:69:95:2e:21:59
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 2 int
20, address 00:0e:04:b7:75:43
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG HD103UJ, 1AA0> SCSI3 0/direct fixed
naa.50000f0007064242
sd0: 953868MB, 512 bytes/sector, 1953523055 sectors
sd1 at scsibus0 targ 2 lun 0: <ATA, SAMSUNG HD103SJ, 1AJ1> SCSI3 0/direct fixed
naa.50000f001acbbf0b
sd1: 953868MB, 512 bytes/sector, 1953523055 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0xa00/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 " USB Keyboard" rev
1.10/4.06 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 " USB Keyboard" rev
1.10/4.06 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (cab206728ec80652.a) swap on sd0b dump on sd0b
sd2 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 922747MB, 512 bytes/sector, 1889787792 sectors
softraid0: volume sd2 is roaming, it used to be sd1, updating metadata
syncing disks... done
sd2 detached
OpenBSD 5.2-current (GENERIC.MP) #107: Mon Nov 19 12:58:00 MST 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
real mem = 1061412864 (1012MB)
avail mem = 1033089024 (985MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/06/09, SMBIOS rev. 2.6 @ 0xeaef0 (42
entries)
bios0: vendor Intel Corp. version "JT94510H.86A.0025.2009.0306.1639" date
03/06/2009
bios0: Intel Corporation D945GSEJT
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) PEGP(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
EHCI(S3) MC97(S4) P0P1(S4) PS2K(S3) PS2M(S3) UAR1(S3) UAR2(S3) P0P4(S4)
P0P5(S4) P0P6(S4) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 5 (P0P1)
acpiprt3 at acpi0: bus 1 (P0P4)
acpiprt4 at acpi0: bus 2 (P0P5)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: IGD_
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 0xd0000/0x1000
cpu0: Enhanced SpeedStep 1596 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
apic 2 int 16, address e0:69:95:2e:21:59
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 2 int
20, address 00:0e:04:b7:75:43
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG HD103UJ, 1AA0> SCSI3 0/direct fixed
naa.50000f0007064242
sd0: 953868MB, 512 bytes/sector, 1953523055 sectors
sd1 at scsibus0 targ 2 lun 0: <ATA, SAMSUNG HD103SJ, 1AJ1> SCSI3 0/direct fixed
naa.50000f001acbbf0b
sd1: 953868MB, 512 bytes/sector, 1953523055 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0xa00/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 " USB Keyboard" rev
1.10/4.06 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 " USB Keyboard" rev
1.10/4.06 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (cab206728ec80652.a) swap on sd0b dump on sd0b
sd2 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 922747MB, 512 bytes/sector, 1889787792 sectors
syncing disks... done
sd2 detached
OpenBSD 5.2-current (GENERIC.MP) #107: Mon Nov 19 12:58:00 MST 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
real mem = 1061412864 (1012MB)
avail mem = 1033089024 (985MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/06/09, SMBIOS rev. 2.6 @ 0xeaef0 (42
entries)
bios0: vendor Intel Corp. version "JT94510H.86A.0025.2009.0306.1639" date
03/06/2009
bios0: Intel Corporation D945GSEJT
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) PEGP(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
EHCI(S3) MC97(S4) P0P1(S4) PS2K(S3) PS2M(S3) UAR1(S3) UAR2(S3) P0P4(S4)
P0P5(S4) P0P6(S4) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 5 (P0P1)
acpiprt3 at acpi0: bus 1 (P0P4)
acpiprt4 at acpi0: bus 2 (P0P5)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: IGD_
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 0xd0000/0x1000
cpu0: Enhanced SpeedStep 1596 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
apic 2 int 16, address e0:69:95:2e:21:59
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 2 int
20, address 00:0e:04:b7:75:43
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG HD103UJ, 1AA0> SCSI3 0/direct fixed
naa.50000f0007064242
sd0: 953868MB, 512 bytes/sector, 1953523055 sectors
sd1 at scsibus0 targ 2 lun 0: <ATA, SAMSUNG HD103SJ, 1AJ1> SCSI3 0/direct fixed
naa.50000f001acbbf0b
sd1: 953868MB, 512 bytes/sector, 1953523055 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0xa00/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 " USB Keyboard" rev
1.10/4.06 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 " USB Keyboard" rev
1.10/4.06 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (cab206728ec80652.a) swap on sd0b dump on sd0b
sd2 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 922747MB, 512 bytes/sector, 1889787792 sectors
Ext2 fs: unsupported optional feature
Ext2 fs: unsupported optional feature
softraid0: invalid metadata format
softraid0: invalid metadata format
sd3 at scsibus2 targ 2 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd3: 923950MB, 512 bytes/sector, 1892249968 sectors
Thanks for the time and interest!
Luis P. Mendes
