[--------- Fri 8.Mar'13 at 8:16:33 +0000 To [email protected] :---------]
> Ok, cheers. It seems the microphone aspect of the webcam might be an > issue: > > > uvideo0 at uhub1 port 4 configuration 1 interface 0 "Logitech product 0x081b" > rev 2.00/0.10 addr 2 > video0 at uvideo0 > uaudio0 at uhub1 port 4 configuration 1 interface 2 "Logitech product 0x081b" > rev 2.00/0.10 addr 2 > uaudio0: audio descriptors make no sense, error=4 > ----------------------------------------------------------- > > What should/can I do to configure this, is it possible using existing > drivers in the GENERIC kernel? Will I need to modify the kernel config > and recompile it or add some new software for it? Is there a section in > the docs about these type of webcams. I should have included that in my google searches, I found some posts that describe very similar problems to mine. Some replies included a patch[1]. [1] http://readlist.com/lists/openbsd.org/misc/22/114510.html Here also is the output from usbdevs -v (should that help): Controller /dev/usb0: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered Controller /dev/usb1: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 addr 2: high speed, power 500 mA, config 1, product 0x081b(0x081b), Logitech(0x046d), rev 0.10, iSerialNumber 2A7783D0 port 5 powered port 6 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 addr 2: low speed, power 100 mA, config 1, product 0x310d(0x310d), IBM(0x04b3), rev 43.01 port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb4: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb5: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb6: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb7: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 addr 2: low speed, power 100 mA, config 1, USB NetVista Full Width Keyboard(0x3025), CHICONY(0x04b3), rev 1.02
